67 chevy shortbed PA project - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thrill4130** · 09-07-2019, 01:33 AM

Well after not being able to fix in the drivers donor door I swapped it out for the door on my truck. Grinded down through the layers of rust. Inch deep before I hit metal. After discovering all sorts of drain holes and weight saving spots I started cutting. Now door looks doable but brazed holes are staying for now.
Posted via Mobile Device

**Thrill4130** · 09-07-2019, 01:35 AM

More fun practice
Posted via Mobile Device

**Thrill4130** · 09-12-2019, 12:08 AM

I got most of the cap stripped down. Drip rail area was rough along with a circle of rust in the center of roof. Also some sweat patches on the rockers and passenger cab corner. Stripped the new bedside also which is straight and clean so it kinda stands out. I also sprayed some golden Fawn paint on the interior part of the door then proceeded to scratch it all up while fighting getting wing window back in. Couldn’t remember to wait on felts till after window.
Posted via Mobile Device

**1971Stepside** · 09-12-2019, 10:53 AM

Great work!

**Thrill4130** · 09-14-2019, 09:25 AM

Quote:

Originally Posted by 1971Stepside

Great work!

Thanks
Posted via Mobile Device

**Thrill4130** · 09-14-2019, 09:28 AM

I finished up bead rolling my door panels. I still need to paint them. Plus a fun battery box I made that bolts in from the side for a rat rod at work.
Posted via Mobile Device

**Getter-Done** · 09-14-2019, 09:40 AM

Nice bead roller skills.
Those door panels look great.

Great theme you got staying with the camper top diamonds.

.

**Thrill4130** · 09-14-2019, 10:49 PM

Thanks. I painted the panels interior color. I got my hood sanded down.
Posted via Mobile Device

**1971Stepside** · 09-16-2019, 10:44 AM

Door panels are amazing!

**Thrill4130** · 09-21-2019, 12:09 AM

I finally got to put my letters on the hood which I’ve owned for a couple years now. Broke the stud off the L which was exciting. Made a aluminum bracket to mount my vintage air heater defrost to. I wanted it high so I brought it all the way up to glovebox door. I also realized I needed to clearance a opening for heater hoses that was big enough to get my hand into. I never thought about having to reach the nuts on the backside of these cool firewall pass through grommets.
Posted via Mobile Device

**Thrill4130** · 09-28-2019, 01:11 PM

Trying to see how much rust is in the cab. I promise there is a little metal holding the cab together somewhere. Also made this bed floor for 38 rat rod at work. I also finally fixed the centering pins on lower control arms. One side had moved after my off-roading adventure in Pennsylvania.
Posted via Mobile Device

**Thrill4130** · 10-03-2019, 12:16 AM

Well crazy hours on the truck lately. I got the doors on, made a box for stereo face plus speakers, weather stripping, 1 1/16” sway bar, radio metal in, firewall holes welded, oil changed and heater installed. Bigger sway bar with good bushings is a game changer. Best $80. Parked my longbed till I decide to sell it or ship it to California.
Posted via Mobile Device

**Thrill4130** · 10-03-2019, 12:20 AM

Door panels on(armrest will match eventually), truck on the lift in the showroom I built at work, mismatched interior for now.
Posted via Mobile Device

**Thrill4130** · 10-03-2019, 12:23 AM

Newer grill pieces
Posted via Mobile Device

**Thrill4130** · 10-07-2019, 11:08 PM

Moved from Missouri to near Bakersfield CA. Fun road trip and luckily I got the heater hooked up before I left. Plus sway bar saved my life coming down Colorado mountains. Besides hitting 3 crazy jumps going 80mph in Utah which bottomed out my wheels pretty good and brakes smoking coming down the mountains it was awesome.
Posted via Mobile Device

**Getter-Done** · 10-07-2019, 11:22 PM

You should have taken the left turn to
Albuquerque

Glad you made it safe.
Now you have a Cali. truck.
I really like that topper you restored.

.

**Thrill4130** · 10-08-2019, 12:12 AM

Pictures from Missouri, Kansas, Colorado, Utah and Vegas.
Posted via Mobile Device

**Thrill4130** · 10-08-2019, 12:14 AM

Quote:

Originally Posted by Getter-Done

You should have taken the left turn to
Albuquerque

Glad you made it safe.
Now you have a Cali. truck.
I really like that topper you restored.

Thanks I figured Colorado route has better skateparks and cool views. Albuquerque is cool also.

.

Posted via Mobile Device

**Thrill4130** · 11-24-2019, 08:40 PM

I finally got videos up on youtube under "Show Me Trucks" of my 1967 Chevy C10 327 11,200mi build "Woody", this shortbed "Buzz', custom camper build and reviews on modifications I learned from this site. Hopefully you guys enjoy thank for all the help.

**LostMy65** · 04-17-2020, 10:34 AM

Man! O Man! Do I like what you did with that canopy!
Fantastic work!

**Thrill4130** · 04-17-2020, 01:24 PM

Quote:

Originally Posted by LostMy65

Man! O Man! Do I like what you did with that canopy!
Fantastic work!

Thanks the camper project is fun for sure
Posted via Mobile Device

longblue72 · 04-30-2020, 08:58 PM

Gonna see this truck in posh or catty woods?! or are you a left coaster now?

**Thrill4130** · 04-30-2020, 11:55 PM

Eventually Im sure I will make it back out there. My girl runs Woodward West so im out here until something changes. I do have a dirt tire on the front for the trails though.

09-07-2019, 01:33 AM	#76
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Well after not being able to fix in the drivers donor door I swapped it out for the door on my truck. Grinded down through the layers of rust. Inch deep before I hit metal. After discovering all sorts of drain holes and weight saving spots I started cutting. Now door looks doable but brazed holes are staying for now. Posted via Mobile Device Attached Images

09-07-2019, 01:35 AM	#77
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	More fun practice Posted via Mobile Device Attached Images

09-12-2019, 12:08 AM	#78
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	I got most of the cap stripped down. Drip rail area was rough along with a circle of rust in the center of roof. Also some sweat patches on the rockers and passenger cab corner. Stripped the new bedside also which is straight and clean so it kinda stands out. I also sprayed some golden Fawn paint on the interior part of the door then proceeded to scratch it all up while fighting getting wing window back in. Couldn’t remember to wait on felts till after window. Posted via Mobile Device Attached Images

09-12-2019, 10:53 AM	#79
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: 67 chevy shortbed PA project Great work! __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-14-2019, 09:28 AM	#81
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	I finished up bead rolling my door panels. I still need to paint them. Plus a fun battery box I made that bolts in from the side for a rat rod at work. Posted via Mobile Device Attached Images

09-14-2019, 09:40 AM	#82
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,698	Re: 67 chevy shortbed PA project Nice bead roller skills. Those door panels look great. Great theme you got staying with the camper top diamonds. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

09-14-2019, 10:49 PM	#83
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Thanks. I painted the panels interior color. I got my hood sanded down. Posted via Mobile Device Attached Images

09-16-2019, 10:44 AM	#84
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: 67 chevy shortbed PA project Door panels are amazing! __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-21-2019, 12:09 AM	#85
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	I finally got to put my letters on the hood which I’ve owned for a couple years now. Broke the stud off the L which was exciting. Made a aluminum bracket to mount my vintage air heater defrost to. I wanted it high so I brought it all the way up to glovebox door. I also realized I needed to clearance a opening for heater hoses that was big enough to get my hand into. I never thought about having to reach the nuts on the backside of these cool firewall pass through grommets. Posted via Mobile Device Attached Images

09-28-2019, 01:11 PM	#86
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Trying to see how much rust is in the cab. I promise there is a little metal holding the cab together somewhere. Also made this bed floor for 38 rat rod at work. I also finally fixed the centering pins on lower control arms. One side had moved after my off-roading adventure in Pennsylvania. Posted via Mobile Device Attached Images

10-03-2019, 12:16 AM	#87
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Well crazy hours on the truck lately. I got the doors on, made a box for stereo face plus speakers, weather stripping, 1 1/16” sway bar, radio metal in, firewall holes welded, oil changed and heater installed. Bigger sway bar with good bushings is a game changer. Best $80. Parked my longbed till I decide to sell it or ship it to California. Posted via Mobile Device Attached Images

10-03-2019, 12:20 AM	#88
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Door panels on(armrest will match eventually), truck on the lift in the showroom I built at work, mismatched interior for now. Posted via Mobile Device Attached Images

10-03-2019, 12:23 AM	#89
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Newer grill pieces Posted via Mobile Device Attached Images

10-07-2019, 11:08 PM	#90
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Moved from Missouri to near Bakersfield CA. Fun road trip and luckily I got the heater hooked up before I left. Plus sway bar saved my life coming down Colorado mountains. Besides hitting 3 crazy jumps going 80mph in Utah which bottomed out my wheels pretty good and brakes smoking coming down the mountains it was awesome. Posted via Mobile Device Attached Images

10-07-2019, 11:22 PM	#91
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,698	Re: 67 chevy shortbed PA project You should have taken the left turn to Albuquerque Glad you made it safe. Now you have a Cali. truck. I really like that topper you restored. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build



Register or Log In To remove these advertisements.

10-08-2019, 12:12 AM	#92
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Pictures from Missouri, Kansas, Colorado, Utah and Vegas. Posted via Mobile Device Attached Images

11-24-2019, 08:40 PM	#94
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Re: 67 chevy shortbed PA project I finally got videos up on youtube under "Show Me Trucks" of my 1967 Chevy C10 327 11,200mi build "Woody", this shortbed "Buzz', custom camper build and reviews on modifications I learned from this site. Hopefully you guys enjoy thank for all the help. Attached Images Last edited by Thrill4130; 11-28-2019 at 05:06 PM.

04-17-2020, 10:34 AM	#95
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,460	Re: 67 chevy shortbed PA project Man! O Man! Do I like what you did with that canopy! Fantastic work! __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

04-30-2020, 08:58 PM	#97
longblue72 Registered User Join Date: Feb 2011 Location: ellicott city maryland Posts: 150	Re: 67 chevy shortbed PA project Gonna see this truck in posh or catty woods?! or are you a left coaster now?

04-30-2020, 11:55 PM	#98
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Re: 67 chevy shortbed PA project Eventually Im sure I will make it back out there. My girl runs Woodward West so im out here until something changes. I do have a dirt tire on the front for the trails though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.