AR BBC serpentine brackets & Factory a/c underhood parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BossHogg69 · 07-09-2012, 08:23 PM

I have a factory 7.4L (88-90 Mark IV 454 TBI) serpentine accessory drive. These are the stamped steel brackets, and fan/clutch assembly, powdercoated gloss black - they have not been used since being powdercoated, only mounted. The idler pulley and tensioner are included, but they are used. The brackets can accomodate an R4 a/c compressor, but this set is a non a/c set, so it has a cast iron idler pulley bracket to go in place of the compressor. The pulleys are not included, as I planned to use a March performance underdrive crank & alternator pulley set. $200 + shipping

BossHogg69 · 07-09-2012, 08:27 PM

more pics, including a couple of what they looked like mounted up.

BossHogg69 · 08-11-2012, 04:24 PM

Ttt
Posted via Mobile Device

BossHogg69 · 03-13-2013, 01:51 PM

ttt

Special Greg · 03-14-2013, 02:38 PM

If you still have them is the price negotiable?

BossHogg69 · 03-14-2013, 06:27 PM

Still have them, and yes, I may be able to wiggle a little on price. Keep in mind, I have more in just the brackets than what I'm asking, and I have since powdercoated them.

BossHogg69 · 05-04-2013, 12:05 PM

ttt

mcbassin · 08-26-2016, 11:07 AM

Very old thread but just wondering if you still have this kit laying around?

07-09-2012, 08:23 PM	#1
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	BBC serpentine brackets & Factory a/c underhood parts I have a factory 7.4L (88-90 Mark IV 454 TBI) serpentine accessory drive. These are the stamped steel brackets, and fan/clutch assembly, powdercoated gloss black - they have not been used since being powdercoated, only mounted. The idler pulley and tensioner are included, but they are used. The brackets can accomodate an R4 a/c compressor, but this set is a non a/c set, so it has a cast iron idler pulley bracket to go in place of the compressor. The pulleys are not included, as I planned to use a March performance underdrive crank & alternator pulley set. $200 + shipping Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! Last edited by BossHogg69; 03-13-2013 at 01:54 PM.

07-09-2012, 08:27 PM	#2
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: BBC serpentine brackets & Factory a/c underhood parts more pics, including a couple of what they looked like mounted up. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

08-11-2012, 04:24 PM	#3
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: BBC serpentine brackets & Factory a/c underhood parts Ttt Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-13-2013, 01:51 PM	#4
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: BBC serpentine brackets & Factory a/c underhood parts ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-14-2013, 02:38 PM	#5
Special Greg Registered User Join Date: Mar 2008 Location: Fort Collins Colorado Posts: 13	Re: BBC serpentine brackets & Factory a/c underhood parts If you still have them is the price negotiable?

03-14-2013, 06:27 PM	#6
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: BBC serpentine brackets & Factory a/c underhood parts Still have them, and yes, I may be able to wiggle a little on price. Keep in mind, I have more in just the brackets than what I'm asking, and I have since powdercoated them. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-04-2013, 12:05 PM	#7
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: BBC serpentine brackets & Factory a/c underhood parts ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

08-26-2016, 11:07 AM	#8
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: BBC serpentine brackets & Factory a/c underhood parts Very old thread but just wondering if you still have this kit laying around? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.