69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 08-11-2007, 10:21 PM

All interior is sold except steering cloumn.

I priced these parts the way I would any 73-87 part, but i'm sure I'm cheap on a few things but i want them picked up ASAP. If i'm way off on the price PLEASE email me privately (home email)to let me know.
I don't sell ANY used parts saying that it is worthy of a show truck.

Started parting out a 5 lug discs converted , 69 CST 2WD LWB. selling the parts that are large or fragile and need to be picked up here first. there is no shipping on this stuff. guys who come to pick up the big stuff can pick through the gingerbread. the bed is getting made into a utility trailer.

LEFT DOOR-straight and no bubbles showing, but obviously it has bondo in it. bottom looks bad a first by unfinished crap on it, but checks out pretty solid, no rust in seam. very front inside corner needs work. door is straight and has decent glass(scratches from felt) soft ray glass and vent in it, regulator works well.$80

STEERING COLUMN- for auto. had no slop in it and has a real nice gear indicator(maybe replacement)$40

LEFT FENDER- Has obviously been worked before, but is straight. The inside looks much better than I thought it would. VERY minor rust on inside of heel.$80

HOOD-very straight, no signs on underside of damage or repairs. undercoated on underside. $80

RIGHT DOOR GLASS- soft ray and very nice with no vertical scratches.$30

RIGHT DOOR VENT- soft ray, chrome is decent, but not perfect.$40

WINDSHIELD CHROME- Sold

SLIDING REAR WINDOW/RUBBER/CHROME- SOLD

ENGINE MOUNTS- just the square rubber biscuits.No towers. $15

COMPLETE EXHAUST SYSTEM- For 2WD trucks with coil spring rear,For headers or adapt for manifolds. roughly 2 years old with limited use. long chrome tips will clean right up. no rust on them. All aluminized piping. 2.5" headpipes going to 2.25" short turbo mufflers. Comess out of muflers as 2.0" and straight out the back. Had very nice, low mellow sound with no kackle.This was a very nicely bent system that i'm sure the guy paid several hundred to have done, especially with those nice tips. $110 . 2 year old headers for additional $40 if you buy exhaust otherwise I want $50 for headers. I also have a brand new pair of headers here for an additional $75
picture of used headers is on interior link.

5 LUG DISC BRAKE FRONT END-SOLD

Call David at 856-678-7883 before 9PM
or email me at dbcrossy@verizon.net with 69 C10 PARTS in subject line please.

I don't always get notices of PM's. It's just my server??

LOCATED; In Pennsville, N.J. 08070. , NJ Routes 295, 40, 130,and 49 along with the NJ turpike all end right here in Pennsville at the base of the Delaware Memorial Bridge and I am only 5 minutes from the base of the bridge and easy to find.
I take calls much more serious than emails also.
No checks of any type. I do accept cash

thanx for taking a look.

**crossy** · 08-13-2007, 11:42 PM

info added to original ad.

chevdanbarnett · 08-19-2007, 10:56 AM

how much would shiping be for the exhaust to 44253 thanks dan

centsless · 08-19-2007, 11:42 AM

Crossy, I am interested in the Interior. Will call you today.

**crossy** · 08-19-2007, 01:54 PM

Sorry, entire interior left here yesterday.

centsless · 08-19-2007, 08:31 PM

Oh well, thanks!!
ttt

rlm316 · 08-20-2007, 10:37 AM

Crossy, Sorry that I haven't gotten back to you. The wife had some health problems and that tied me up for a while. Is that column for a '71-'72 or a '69-'70. Thanks, Lane

**crossy** · 08-20-2007, 02:16 PM

Lane, I've been doing this long enough that i know when someone does not get back to me that it could be one of many reasons, but most times it is just a change of interests. Family always comes first here also, but i di d put in a courtesy call to you so i pretty much assumed you knew i was about to off load some of this stuff. Your still welcome to come by and look at the other stuff. Cowtown fall meet will be soon enough, but i already havea truck load of trans & transfer cases to take w/o taking gingerly sheetmetal.
I wouldn't know the difference on these year trucks columns. this truck APPEARS to be all 69, don't know why there was 5 lug front & rear though. i have parted enough 73-87's to tell you that NOTHING is ever un-changed by the time i get them. old trucks are always someones frankenstein(that's pronounced fraunk-en-stene)

If you really want to see what i am talking about come by and look at this truck's bed on the underside before i finish making a trailer out of it, fat tires and lowering coils in place i might add. . thanx, crossy

toomanytoyz · 08-25-2007, 10:00 PM

Would you be interested in selling just the Lowering Coils & Drop Shocks?

Are they a 3" Drop?

Thanks for Considering, Rick

jb4short · 08-26-2007, 07:33 AM

Crossy- I don't see it listed but I could use all the firewall mounted heater stuff off a non-A/C truck

**crossy** · 08-26-2007, 08:52 AM

Quote:

Originally Posted by Tri-ProAutomotive

Crossy- I don't see it listed but I could use all the firewall mounted heater stuff off a non-A/C truck

sorry John? had to get rid of the cab 2 weeks ago.

entire front suspension left here saturday morning thanx to Mark P.- good luck with that pair of 68's. great meeting you and Ryan

ad updated.

08-11-2007, 10:21 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. All interior is sold except steering cloumn. I priced these parts the way I would any 73-87 part, but i'm sure I'm cheap on a few things but i want them picked up ASAP. If i'm way off on the price PLEASE email me privately (home email)to let me know. I don't sell ANY used parts saying that it is worthy of a show truck. Started parting out a 5 lug discs converted , 69 CST 2WD LWB. selling the parts that are large or fragile and need to be picked up here first. there is no shipping on this stuff. guys who come to pick up the big stuff can pick through the gingerbread. the bed is getting made into a utility trailer. LEFT DOOR-straight and no bubbles showing, but obviously it has bondo in it. bottom looks bad a first by unfinished crap on it, but checks out pretty solid, no rust in seam. very front inside corner needs work. door is straight and has decent glass(scratches from felt) soft ray glass and vent in it, regulator works well.$80 STEERING COLUMN- for auto. had no slop in it and has a real nice gear indicator(maybe replacement)$40 LEFT FENDER- Has obviously been worked before, but is straight. The inside looks much better than I thought it would. VERY minor rust on inside of heel.$80 HOOD-very straight, no signs on underside of damage or repairs. undercoated on underside. $80 RIGHT DOOR GLASS- soft ray and very nice with no vertical scratches.$30 RIGHT DOOR VENT- soft ray, chrome is decent, but not perfect.$40 WINDSHIELD CHROME- Sold SLIDING REAR WINDOW/RUBBER/CHROME- SOLD ENGINE MOUNTS- just the square rubber biscuits.No towers. $15 COMPLETE EXHAUST SYSTEM- For 2WD trucks with coil spring rear,For headers or adapt for manifolds. roughly 2 years old with limited use. long chrome tips will clean right up. no rust on them. All aluminized piping. 2.5" headpipes going to 2.25" short turbo mufflers. Comess out of muflers as 2.0" and straight out the back. Had very nice, low mellow sound with no kackle.This was a very nicely bent system that i'm sure the guy paid several hundred to have done, especially with those nice tips. $110 . 2 year old headers for additional $40 if you buy exhaust otherwise I want $50 for headers. I also have a brand new pair of headers here for an additional $75 picture of used headers is on interior link. 5 LUG DISC BRAKE FRONT END-SOLD Call David at 856-678-7883 before 9PM or email me at dbcrossy@verizon.net with 69 C10 PARTS in subject line please. I don't always get notices of PM's. It's just my server?? LOCATED; In Pennsville, N.J. 08070. , NJ Routes 295, 40, 130,and 49 along with the NJ turpike all end right here in Pennsville at the base of the Delaware Memorial Bridge and I am only 5 minutes from the base of the bridge and easy to find. I take calls much more serious than emails also. No checks of any type. I do accept cash thanx for taking a look. Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 08-26-2007 at 09:17 AM.

08-13-2007, 11:42 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. info added to original ad. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-19-2007, 10:56 AM	#3
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. how much would shiping be for the exhaust to 44253 thanks dan

08-19-2007, 11:42 AM	#4
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Crossy, I am interested in the Interior. Will call you today. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 08-19-2007 at 11:46 AM.

08-19-2007, 01:54 PM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Sorry, entire interior left here yesterday. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-19-2007, 08:31 PM	#6
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Oh well, thanks!! ttt __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

08-20-2007, 10:37 AM	#7
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Crossy, Sorry that I haven't gotten back to you. The wife had some health problems and that tied me up for a while. Is that column for a '71-'72 or a '69-'70. Thanks, Lane

08-20-2007, 02:16 PM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Lane, I've been doing this long enough that i know when someone does not get back to me that it could be one of many reasons, but most times it is just a change of interests. Family always comes first here also, but i di d put in a courtesy call to you so i pretty much assumed you knew i was about to off load some of this stuff. Your still welcome to come by and look at the other stuff. Cowtown fall meet will be soon enough, but i already havea truck load of trans & transfer cases to take w/o taking gingerly sheetmetal. I wouldn't know the difference on these year trucks columns. this truck APPEARS to be all 69, don't know why there was 5 lug front & rear though. i have parted enough 73-87's to tell you that NOTHING is ever un-changed by the time i get them. old trucks are always someones frankenstein(that's pronounced fraunk-en-stene) If you really want to see what i am talking about come by and look at this truck's bed on the underside before i finish making a trailer out of it, fat tires and lowering coils in place i might add. . thanx, crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 08-20-2007 at 07:06 PM.

08-25-2007, 10:00 PM	#9
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Would you be interested in selling just the Lowering Coils & Drop Shocks? Are they a 3" Drop? Thanks for Considering, Rick

08-26-2007, 07:33 AM	#10
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 69 C10 Cst parts, for pick up in Nj. discs,hood, fender,door, etc. Crossy- I don't see it listed but I could use all the firewall mounted heater stuff off a non-A/C truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.