|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-21-2015, 07:07 PM
|
#1 |
|
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
3/8 fuel line fitting to -6 AN ?
I,m trying to find a fitting to go from a steel 3/8 fuel line which has ,Im guessing a male 1/2 in. fitting to convert to a -6 male to run to my mech. fuel pump from the tank.I don,t seem to see one online but don,t know if I,m wording it wrong.I see the ones that have a Ferrel style but was wanting the other so I don,t have to cut
|
|
|
|
05-21-2015, 07:17 PM
|
#2 | |
|
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: 3/8 fuel line fitting to -6 AN ?
Quote:
Here's a link to Slummits list of Earls Inverted flare to AN- fittings
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
|
|
|
|
|
05-21-2015, 11:15 PM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: 3/8 fuel line fitting to -6 AN ?
Are you wanting to go from a 3/8" inverted flare to a -6 male?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
05-22-2015, 12:02 AM
|
#4 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: 3/8 fuel line fitting to -6 AN ?
low pressure lines can use a hard-tube to AN adapter, or you can buy a JIC 37* flare tool and actually just flare one on. They make 1/2" to 3/8" reducer fuel fittings, and then they make 3/8 NPT to -6AN adapter fittings.
You may not find a "one-fitting" solution, unless you flare it yourself or use the hard tube adapter. The problem with AN conversion fittings is that odd-size stuff has a 2-3x higher price than commonly used ones.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
05-22-2015, 09:10 AM
|
#5 |
|
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
Re: 3/8 fuel line fitting to -6 AN ?
It is a 3/8 hard steel hard line but I was measuring the flared male fitting on the end which looks like1/2 inch
|
|
|
|
|
05-22-2015, 09:47 AM
|
#6 |
|
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Re: 3/8 fuel line fitting to -6 AN ?
You will have to find a hydraulic or fitting shop , but they are out their . I have a good hydraulic shop in town ( he also drag races ) For my 69 Camaro I have small amount of rubber hose to the pump and an inverted flair male to -6 in the pump and -6 with 2-90 's on each end going to the carb
__________________
1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583 |
|
|
|
|
05-22-2015, 09:53 AM
|
#7 |
|
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
Re: 3/8 fuel line fitting to -6 AN ?
Finally found it I,m sure.Just had to get the right wording. NPT. inverted flare,45 degree, 37 degree,male ,female ARRG.,been along time doing this http://www.summitracing.com/int/part...0610/overview/
|
|
|
|
|
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
