side marker filler door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LEGERLAND@CS.COM · 04-14-2002, 11:46 PM

what can anyone tell me about a side marker filler door . i was told that this can be done , but dont know where to find this information. PLEASE HELP!!!!!

barn9 · 04-14-2002, 11:58 PM

That can be done, and it has been on here before. Wes might have the info on his site. I remember the opening mechanism came from an S-10 fuel door, trimmed and fit to the back of the running light, and the fill tube was run down where the rear stake pocket goes down (stake pocket will be altered also). Hope this helps, that's all I remember about the setup.

------------------[*]'71 Cheyenne, 402BB[*]Winfield, KS[*] http://barn9.freeservers.com

Southpa · 04-15-2002, 12:23 AM

Something I plan on doing in the distant future as one of my bedsides doesn't even have a sidemarker. And I'm sure WES won't mind my posting his link, thanks muchly WES!

http://www.classicheartbeat.com/mark...t_gas_door.htm

------------------
Southpa
1970 GMC 1500 Custom
Victoria, BC, Canada

communities.msn.com/Alsplac/shoebox.msnw

**Desert Rat** · 04-15-2002, 11:50 AM

seems like it would be kind of a pain to put gas in?but i hate going to the gas station anyway,and i do it frequently.

dave's70 · 04-15-2002, 12:01 PM

I just sent you the directions, let me know if they come through. 1st time e-mailing them.

------------------
70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill, and a shaved tailgate.

04-14-2002, 11:46 PM	#1
LEGERLAND@CS.COM Registered User Join Date: Jan 2002 Location: PITTSBURGH PA USA Posts: 20	side marker filler door what can anyone tell me about a side marker filler door . i was told that this can be done , but dont know where to find this information. PLEASE HELP!!!!!

04-14-2002, 11:58 PM	#2
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	That can be done, and it has been on here before. Wes might have the info on his site. I remember the opening mechanism came from an S-10 fuel door, trimmed and fit to the back of the running light, and the fill tube was run down where the rear stake pocket goes down (stake pocket will be altered also). Hope this helps, that's all I remember about the setup. ------------------[]'71 Cheyenne, 402BB[]Winfield, KS[*] http://barn9.freeservers.com __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

04-15-2002, 12:23 AM	#3
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,410	Something I plan on doing in the distant future as one of my bedsides doesn't even have a sidemarker. And I'm sure WES won't mind my posting his link, thanks muchly WES! http://www.classicheartbeat.com/mark...t_gas_door.htm ------------------ Southpa 1970 GMC 1500 Custom Victoria, BC, Canada communities.msn.com/Alsplac/shoebox.msnw __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.

04-15-2002, 12:01 PM	#5
dave's70 Registered User Join Date: Jan 2002 Location: comox, british columbia Posts: 110	I just sent you the directions, let me know if they come through. 1st time e-mailing them. ------------------ 70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill, and a shaved tailgate. __________________ 70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill,shaved stake pockets and tailgate

04-15-2002, 11:50 AM	#4
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	seems like it would be kind of a pain to put gas in?but i hate going to the gas station anyway,and i do it frequently.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.