|
03-17-2013, 01:09 AM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: Faribault, MN
Posts: 385
|
Lower hose solution
Put in a Champion aluminum radiator today. The lower hose bung was larger than on the stock one. Needing a hose with a 90 degree bend and 1 3/4" ID on each end led me to a Gates 20957. For my application (dakota frame swap) trimming of the ends 1" and 8 1/2" made for a nice look.
  
|
|
|
|
03-17-2013, 12:47 PM
|
#2 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,677
|
Re: Lower hose solution
thanks for posting the part #
a solution for your upper hose might be 
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
03-17-2013, 02:41 PM
|
#3 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: Lower hose solution
I took bent wires to the store and left with upper Gates 20416, lower Gates 20584. I had to shorten one end on each one. I have a big truck radiator, 350 engine with long waterpump.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
