1983 C10 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KP Jon** · 07-29-2016, 12:52 PM

Found this rust free, VERY straight, '83 short bed locally

63K miles, straight six, 3 spd.

Planning on a 4 1/2"-6" drop and installing a 420HP small block, 20's, T350, etc.

Got the front suspension done

and it's off to paint to get the firewall and floor jammed

bed is super straight- not even a dent in the headboard

can wait until it comes back to start getting the mountain of parts bolted into this thing

Westwind · 07-29-2016, 01:08 PM

Nice truck. good luck with your build.

mud.man.rj · 07-29-2016, 01:20 PM

Nice buy on the truck, guess being a 6 cyl it was mostly left alone, works out great for you, sounds like a good plan already in the works, keep us posted.
Mudman.

**KP Jon** · 07-29-2016, 01:44 PM

Thanks all!

**KP Jon** · 07-29-2016, 01:45 PM

Jstock85 · 07-30-2016, 10:44 AM

Is that replacement parts on your front susp or you clean and paint? Sorry can't see the pic to well.
Posted via Mobile Device

**KP Jon** · 07-30-2016, 11:02 AM

Quote:

Originally Posted by Jstock85

Is that replacement parts on your front susp or you clean and paint? Sorry can't see the pic to well.
Posted via Mobile Device

every piece there is new

Vega_67C10 · 07-30-2016, 11:15 AM

New work on the frame. It looks new as well.

Vega_67C10 · 07-31-2016, 02:22 PM

Quote:

Originally Posted by Vega_67C10

*NICE work on the frame. It looks new as well.

...

**KP Jon** · 07-31-2016, 02:25 PM

Quote:

Originally Posted by Vega_67C10

...

Thanks!

RDrancher · 07-31-2016, 02:29 PM

Where did you find new lower control arms?

**KP Jon** · 07-31-2016, 07:14 PM

Quote:

Originally Posted by RDrancher

Where did you find new lower control arms?

1A Auto

RDrancher · 07-31-2016, 07:43 PM

Quote:

Originally Posted by KP Jon

1A Auto

Thanks, but they're not showing up on their site. Maybe it's a temporary shortage or something. I haven't been able to find any non-tubular C10 lower arms anywhere. I even posted a thread in the suspension section looking for them, but nothing so far.

**KP Jon** · 07-31-2016, 07:46 PM

Quote:

Originally Posted by RDrancher

Thanks, but they're not showing up on their site. Maybe it's a temporary shortage or something. I haven't been able to find any non-tubular C10 lower arms anywhere. I even posted a thread in the suspension section looking for them, but nothing so far.

http://www.1aauto.com/control-arm-wi...r/i/1asfk00221

**KP Jon** · 07-31-2016, 07:48 PM

sorry- wrong ones. I bought these and they were 3/4 ton. Then got a set from LMC

RDrancher · 07-31-2016, 08:49 PM

Thanks, The 3/4 ton one are all I could find. I'll check out LMC.

**KP Jon** · 08-01-2016, 08:24 AM

Quote:

Originally Posted by RDrancher

Thanks, The 3/4 ton one are all I could find. I'll check out LMC.

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=54

RDrancher · 08-01-2016, 11:04 AM

Quote:

Originally Posted by KP Jon

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=54

Thank you VERY much! I'd been searching for them for days.

**KP Jon** · 08-02-2016, 07:13 AM

Couple more photos

These are the wheels and tires

Engine I bought

LOTS of other parts already bought just sitting in boxes waiting......and waiting.....

mud.man.rj · 08-02-2016, 11:33 PM

Very nice collection of parts, getting excited I bet.

**KP Jon** · 08-03-2016, 06:29 AM

Quote:

Originally Posted by mud.man.rj

Very nice collection of parts, getting excited I bet.

it's taking longer than I anticipated but very excited!

**KP Jon** · 08-08-2016, 01:16 PM

Got the grille and headlight doors in from LMC today and they look fantastic! LMC now has the "GM Licensed" 1985-1987 single headlight grilles in stock (With the bowtie emblem bed in them). LMC PN 38-4158

**KP Jon** · 08-12-2016, 11:53 AM

Got the cab back from being cut in. Now the rear suspension, motor and trans can go in to measure for the driveshaft

Sik66 · 08-13-2016, 07:02 AM

Looking good man!

**KP Jon** · 08-13-2016, 07:52 AM

Quote:

Originally Posted by Sik66

Looking good man!

Thank you!

07-29-2016, 12:52 PM	#1
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	1983 C10 build Found this rust free, VERY straight, '83 short bed locally 63K miles, straight six, 3 spd. Planning on a 4 1/2"-6" drop and installing a 420HP small block, 20's, T350, etc. Got the front suspension done and it's off to paint to get the firewall and floor jammed bed is super straight- not even a dent in the headboard can wait until it comes back to start getting the mountain of parts bolted into this thing

07-29-2016, 01:08 PM	#2
Westwind Registered User Join Date: Jun 2012 Location: Glendale,Arizona Posts: 50	Re: 1983 C10 build Nice truck. good luck with your build.

07-29-2016, 01:20 PM	#3
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 1983 C10 build Nice buy on the truck, guess being a 6 cyl it was mostly left alone, works out great for you, sounds like a good plan already in the works, keep us posted. Mudman. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

07-29-2016, 01:44 PM	#4
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build Thanks all!

07-29-2016, 01:45 PM	#5
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build

07-30-2016, 10:44 AM	#6
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: 1983 C10 build Is that replacement parts on your front susp or you clean and paint? Sorry can't see the pic to well. Posted via Mobile Device

07-30-2016, 11:15 AM	#8
Vega_67C10 Registered User Join Date: Aug 2009 Location: Central Indiana Posts: 201	Re: 1983 C10 build New work on the frame. It looks new as well. __________________ I Saw Elvis at 1000 Feet - John Force

07-31-2016, 02:29 PM	#11
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: 1983 C10 build Where did you find new lower control arms? __________________ Romans 10:9 - The Truth

07-31-2016, 07:48 PM	#15
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build sorry- wrong ones. I bought these and they were 3/4 ton. Then got a set from LMC

07-31-2016, 08:49 PM	#16
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: 1983 C10 build Thanks, The 3/4 ton one are all I could find. I'll check out LMC. __________________ Romans 10:9 - The Truth

08-02-2016, 07:13 AM	#19
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build Couple more photos These are the wheels and tires Engine I bought LOTS of other parts already bought just sitting in boxes waiting......and waiting.....

08-02-2016, 11:33 PM	#20
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 1983 C10 build Very nice collection of parts, getting excited I bet. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

08-08-2016, 01:16 PM	#22
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build Got the grille and headlight doors in from LMC today and they look fantastic! LMC now has the "GM Licensed" 1985-1987 single headlight grilles in stock (With the bowtie emblem bed in them). LMC PN 38-4158

08-12-2016, 11:53 AM	#23
KP Jon Active Member Join Date: Dec 2015 Location: Forest, VA Posts: 152	Re: 1983 C10 build Got the cab back from being cut in. Now the rear suspension, motor and trans can go in to measure for the driveshaft

08-13-2016, 07:02 AM	#24
Sik66 Registered User Join Date: Jul 2016 Location: Qld Australia Posts: 70	Re: 1983 C10 build Looking good man!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.