NEW - Dakota Digital HDX Series - Taking VHX to a whole new level!

[Twisted78SS]

Matt,
Price quote for the following HDX please

HDX-67C-PU-K-DIM

Thanks,

Drew

[MCB Matt]

Originally Posted by Twisted78SS

Matt,
Price quote for the following HDX please

HDX-67C-PU-K-DIM

Thanks,

Drew

PM sent
Thanks
Kim
MCB

[everettelane]

Matt I just bought the Dakota digital HDX gauges from you, here are the problems i'm having it looks like y'all sent the speed sensor for a 350 turbo trans not the T56 also the temperature sensor comes with a straight cable that is so long it hits my headers do y'all carry a cable that is 90 degree.

[MCB Matt]

Originally Posted by everettelane

Matt I just bought the Dakota digital HDX gauges from you, here are the problems i'm having it looks like y'all sent the speed sensor for a 350 turbo trans not the T56 also the temperature sensor comes with a straight cable that is so long it hits my headers do y'all carry a cable that is 90 degree.

Ok, the T56 uses an electric speed sensor. The kit comes with the speed sensor by default. There is no 90 degree connector for the sensor. You will need to get an elbow to turn it or move it (would be best). This is an issue that has never come up once with the sensors.

Let me know if you need anything else, we are happy to help.
Thanks
Matt

[everettelane]

Originally Posted by MCB Matt

Ok, the T56 uses an electric speed sensor. The kit comes with the speed sensor by default. There is no 90 degree connector for the sensor. You will need to get an elbow to turn it or move it (would be best). This is an issue that has never come up once with the sensors.

Let me know if you need anything else, we are happy to help.
Thanks
Matt

Here is a pic of what i'm talking about, i know i can find some fittings to rotate it, do not have other places to move the sensor to, it's an lt1 just saying if there was a 90 degree plug it would save some people the aggravation of finding other fittings if you notice in the pic the original one wire plug has no problem with clearance of the header. i'm sure most people just go find other fittings and go on about there business but you would figure after spending 1300 bucks this would not be a problem, Thanks!!!

[MCB Matt]

Originally Posted by everettelane

Here is a pic of what i'm talking about, i know i can find some fittings to rotate it, do not have other places to move the sensor to, it's an lt1 just saying if there was a 90 degree plug it would save some people the aggravation of finding other fittings if you notice in the pic the original one wire plug has no problem with clearance of the header. i'm sure most people just go find other fittings and go on about there business but you would figure after spending 1300 bucks this would not be a problem, Thanks!!!

Do you have a pic of the top of the motor, near the water neck? This has never been brought up before. What headers are you running? The new sensor is a 2 wire and the connector they use is actually a very high quality piece, especially when you compare it to that stock one.

Thanks
Matt

[Richard]

Do you sell the ECD-100 and the SGI-8E?

[MCB Matt]

Originally Posted by Richard

Do you sell the ECD-100 and the SGI-8E?

Yes we do, PM on the way.
Thanks
Matt