How about some pics of 67-72 Trucks - Page 184 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FrankieD · 06-16-2011, 11:21 AM

I thought I would post something a little diffrent this is the death of a 72. I bought it for parts and took it down to the last usable part I thought but any way here are the pix.

What what it looked like when I bought it.

After I stripped it:

At the scrapper a (little Blood & Guts) got $200 for it:

jwgeorge · 06-16-2011, 12:08 PM

FrankieD, It's hard to watch an old truck get crushed like that, but we all know that we can't keep them all even though we really want to, it just isn't possible.

jugadro · 06-16-2011, 01:52 PM

Wow. I woulda bought that.
Posted via Mobile Device

Longhorn321 · 06-16-2011, 02:01 PM

Quote:

Originally Posted by jugadro

Wow. I woulda bought that.
Posted via Mobile Device

Me too for $200 for sure. Prolly could have got that back out of one of the bedsides if they were as good as they looked.

PanteraRazorback · 06-16-2011, 02:12 PM

Here is the 71 with new wheels. 17x8 TT2.1's with 255/60R17's
Name: 71 c10 2.jpg
Views: 5858
Size: 42.1 KB

Name: 71 c10.jpg
Views: 5045
Size: 53.4 KB

**Already Gone** · 06-16-2011, 03:07 PM

[QUOTE=PanteraRazorback;4738607]Here is the 71 with new wheels. 17x8 TT2.1's with 255/60R17's

Are you planning on getting her down a bit as I think that would look great with your 17's..

PanteraRazorback · 06-16-2011, 05:04 PM

Quote:

Are you planning on getting her down a bit as I think that would look great with your 17's..

Yep for sure.. I'm currently gathering parts to lower the front and the rear.The truck always did sit high especially with 15's.

67chevy1series · 06-16-2011, 06:15 PM

Frankie d your a murderer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

gonnuts · 06-16-2011, 09:30 PM

I Know this won't go over very well!

Quote:

Originally Posted by FrankieD

I thought I would post something a little diffrent this is the death of a 72. I bought it for parts and took it down to the last usable part I thought but any way here are the pix.

What what it looked like when I bought it.

After I stripped it:

At the scrapper a (little Blood & Guts) got $200 for it:

FrankieD · 06-17-2011, 07:47 AM

Quote:

Originally Posted by gonnuts

I Know this won't go over very well!

Took every part possible off and am sharing with others in need.

The grill is in Mississippi and the hub caps and mirrors went to St Louis area some are spread around the Chicago area and still plenty to more to share. I kept a lot for my 70; it was cheaper to buy the 72 donor than to buy new parts. I just got the 350 from the machine shop yesterday so it will live on while the 307 sits in a corner. The 72 spent its life on the roads in northern Illinois and was too rotten to save except maybe the frame.

Jimmyc · 06-17-2011, 09:16 AM

sniff,sniff..

**70cst** · 06-17-2011, 09:59 AM

Quote:

Originally Posted by Jimmyc

sniff,sniff..

TrkEnvy · 06-17-2011, 11:18 AM

All i could think when I saw the death pics was one of those long trailing off noooooooooooooooooos.. lol She was rough and im glad she organ donored to other trucks, but it is sad to see these trucks go to scrap. Im always glad to see a guy furiously working to save a cab even when people are telling him its cheaper to go find another and scrap his.

FrankieD · 06-17-2011, 12:32 PM

It's all about time, ability, how much room you have to work in and most of all money

Longhorn321 · 06-17-2011, 12:52 PM

Quote:

Originally Posted by FrankieD

It's all about time, ability, how much room you have to work in and most of all money

I don't have enough of any of those!

**Palf70Step** · 06-17-2011, 04:34 PM

tdp67 · 06-17-2011, 05:43 PM

Quote:

Originally Posted by PanteraRazorback

Here is the 71 with new wheels. 17x8 TT2.1's with 255/60R17's
Attachment 761748
Attachment 761749

Nice! Who makes 'em? Is that a 70 grill?

PanteraRazorback · 06-17-2011, 06:53 PM

Quote:

Originally Posted by tdp67

Nice! Who makes 'em? Is that a 70 grill?

Thanks! They are made by American Racing, i bought them through a company called TireRack. Great to deal with, i purchased them on a Friday, and got them on the following Tuesday, very fast!
& ya the grille is a 69/70 grille but i think it looks better than the 71/72 IMO..

68Stepbed · 06-17-2011, 09:44 PM

Quote:

Originally Posted by tdp67

Nice! Who makes 'em? Is that a 70 grill?

American racing sells the 2-peice TTII and also the 1-peice TT2.1. Virtually the same wheel, but the 2.1 is, well as mentioned, 1 peice, so there's no custom offsets.

Mayo · 06-18-2011, 05:58 PM

Just got my new rims and tires put on today. They are 265/75/16 Michelin LTX MS wheels on 16x8 Ion Alloys 171 series wheels. The whole set cost more than the truck did.

Before

After

VDOG · 06-23-2011, 02:44 PM

[QUOTE=CC69Rat;4687109]VDOG - any more pics of your truck at 3/4 drop? I am about to drop my 68 and I can't decide on 4 or 5 in the back. Thanks.

Sorry im just getting back to you. Yes its a 3/4 drop, I have heavy duty coils in the back since I still use it for clean up till we finish our house. Then im going to a 4 1/2 in the front and a 5" drop in the back. My spindles are stock height right now. 15x8's in the front and 15x10 1/2 in the back. Hope this helps.

Sicklajoie · 06-23-2011, 06:36 PM

Quote:

Originally Posted by Mayo

Just got my new rims and tires put on today. They are 265/75/16 Michelin LTX MS wheels on 16x8 Ion Alloys 171 series wheels. The whole set cost more than the truck did.

Before

After

Can't go wrong with those tires. I love mine. Where did you get them??

magwakeenercew2jh · 06-23-2011, 09:15 PM

Quote:

Originally Posted by jim-bob

..I agree on the grill..I'm doing the same on my '72

Well, in my opinion, that's one of the beauties of the 67-72 Chevy Truck genre. There's enough of the same style to keep us all interested. And enough different to keep all of our interest.

I like your grill. I like 67- 68-69-70 front ends, in general.

But I built a '72 a few years back, The picture of it, and in particular the front end, had me coming back for more.

This time, I had the choice to run a 68 front clip, but I'm going with the '71 (grill's hanging on the wall right now). Pretty much the reverse of what most folks do, given the option.

But, that's the way I want it.

Mayo · 06-23-2011, 10:18 PM

Quote:

Originally Posted by Sicklajoie

Can't go wrong with those tires. I love mine. Where did you get them??

I got the tires from tirerack.com

FrankieD · 06-24-2011, 02:14 PM

Quote:

Originally Posted by magwakeenercew2jh

Well, in my opinion, that's one of the beauties of the 67-72 Chevy Truck genre. There's enough of the same style to keep us all interested. And enough different to keep all of our interest.

I like your grill. I like 67- 68-69-70 front ends, in general.

But I built a '72 a few years back, The picture of it, and in particular the front end, had me coming back for more.

This time, I had the choice to run a 68 front clip, but I'm going with the '71 (grill's hanging on the wall right now). Pretty much the reverse of what most folks do, given the option.

But, that's the way I want it.

You must be single or have a young wife to have a grill hanging on the wall

06-16-2011, 11:21 AM	#4576
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: How about some pics of 67-72 Trucks I thought I would post something a little diffrent this is the death of a 72. I bought it for parts and took it down to the last usable part I thought but any way here are the pix. What what it looked like when I bought it. After I stripped it: At the scrapper a (little Blood & Guts) got $200 for it: __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

06-16-2011, 12:08 PM	#4577
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of 67-72 Trucks FrankieD, It's hard to watch an old truck get crushed like that, but we all know that we can't keep them all even though we really want to, it just isn't possible. __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

06-16-2011, 01:52 PM	#4578
jugadro that's right! Join Date: Mar 2004 Location: Topsham, ME, USA Posts: 101	Re: How about some pics of 67-72 Trucks Wow. I woulda bought that. Posted via Mobile Device __________________ 70-K20-4X4

06-16-2011, 02:12 PM	#4580
PanteraRazorback Registered User Join Date: Apr 2010 Location: Medicine Hat, Alberta Posts: 88	Re: How about some pics of 67-72 Trucks Here is the 71 with new wheels. 17x8 TT2.1's with 255/60R17's

06-16-2011, 03:07 PM	#4581
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,073	Re: How about some pics of 67-72 Trucks [QUOTE=PanteraRazorback;4738607]Here is the 71 with new wheels. 17x8 TT2.1's with 255/60R17's Are you planning on getting her down a bit as I think that would look great with your 17's.. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

06-16-2011, 06:15 PM	#4583
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: How about some pics of 67-72 Trucks Frankie d your a murderer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

06-17-2011, 09:16 AM	#4586
Jimmyc Registered User Join Date: Mar 2011 Location: Cary, NC Posts: 10	Re: How about some pics of 67-72 Trucks sniff,sniff..

06-17-2011, 11:18 AM	#4588
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: How about some pics of 67-72 Trucks All i could think when I saw the death pics was one of those long trailing off noooooooooooooooooos.. lol She was rough and im glad she organ donored to other trucks, but it is sad to see these trucks go to scrap. Im always glad to see a guy furiously working to save a cab even when people are telling him its cheaper to go find another and scrap his.

06-17-2011, 12:32 PM	#4589
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: How about some pics of 67-72 Trucks It's all about time, ability, how much room you have to work in and most of all money __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

06-17-2011, 04:34 PM	#4591
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,640	Re: How about some pics of 67-72 Trucks __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-18-2011, 05:58 PM	#4595
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: How about some pics of 67-72 Trucks Just got my new rims and tires put on today. They are 265/75/16 Michelin LTX MS wheels on 16x8 Ion Alloys 171 series wheels. The whole set cost more than the truck did. Before After __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

06-23-2011, 02:44 PM	#4596
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: How about some pics of 67-72 Trucks [QUOTE=CC69Rat;4687109]VDOG - any more pics of your truck at 3/4 drop? I am about to drop my 68 and I can't decide on 4 or 5 in the back. Thanks. Sorry im just getting back to you. Yes its a 3/4 drop, I have heavy duty coils in the back since I still use it for clean up till we finish our house. Then im going to a 4 1/2 in the front and a 5" drop in the back. My spindles are stock height right now. 15x8's in the front and 15x10 1/2 in the back. Hope this helps. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.