SoCal checkin' in - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dano69c10 · 04-17-2012, 11:43 PM

Hey Lee H! Comin' out to the SFV with us?

pedro6371 · 04-17-2012, 11:47 PM

im down to bring my truck im in the s.f.v

Dano69c10 · 04-18-2012, 12:08 AM

Allright pedro6371! I'll add you to the list.

Lee H · 04-18-2012, 11:43 AM

Quote:

Originally Posted by Dano69c10

Hey Lee H! Comin' out to the SFV with us?

I'm pretty much out of commission for the rest of the summer. My truck has a date with the painter in two weeks. I'm just beginning to tear it down. Big job to deconstruct, mark, and document, although the it's easier to tear down than to reconstruct. I may meet up with you guys a few times in my vette. Cheers, Lee

VDOG · 04-18-2012, 01:36 PM

Quote:

Originally Posted by Lee H

I'm pretty much out of commission for the rest of the summer. My truck has a date with the painter in two weeks. I'm just beginning to tear it down. Big job to deconstruct, mark, and document, although the it's easier to tear down than to reconstruct. I may meet up with you guys a few times in my vette. Cheers, Lee

Lee I think if you make it to the Valley in your Vette will be good enough for us as long as you make it.

denz72 · 04-18-2012, 10:51 PM

Quote:

Originally Posted by Lee H

I'm pretty much out of commission for the rest of the summer. My truck has a date with the painter in two weeks. I'm just beginning to tear it down. Big job to deconstruct, mark, and document, although the it's easier to tear down than to reconstruct. I may meet up with you guys a few times in my vette. Cheers, Lee

Lee what color?

Lee H · 04-19-2012, 10:06 AM

Quote:

Originally Posted by VDOG

Lee I think if you make it to the Valley in your Vette will be good enough for us as long as you make it.

Quote:

Originally Posted by denz72

Lee what color?

Thanks Vince!

Medium Olive, factory color, with a white top.

Dano69c10 · 04-19-2012, 12:52 PM

Bring da vette!

Kabwe · 04-19-2012, 03:01 PM

Quote:

Originally Posted by VDOG

You are absolutely correct!!! LOL

After retracing my steps, I remembered, coming down my alley, it was two knuckle heads, one in an old tore up tow truck and he was blocking half the alley while working on his friends truck. As I squeezed by I heard the noise on the side of my truck, as I passed I looked back to see some bushes. I think it was a small palm in there, but did not think it did any harm.
So it was my fault and the idiots blocking the alley.

Clusmy me!!

See, I can't take you anywhere. You were all ready to start a fight with a guy and than find its your darn fault. Stay home and don't go to anymore meet and greet until you learn how to drive.lol

VDOG · 04-19-2012, 08:35 PM

Quote:

Originally Posted by Kabwe

See, I can't take you anywhere. You were all ready to start a fight with a guy and than find its your darn fault. Stay home and don't go to anymore meet and greet until you learn how to drive.lol

lmao!!!!!!

Dano69c10 · 04-28-2012, 12:35 PM

Bump 4 d Valley Meet!

VDOG · 04-30-2012, 12:01 AM

So I changed my coils from 4 inch to 5 inch today. Not a bad stance, I still want to add drop spindles and maybe lowering blocks. So I took the truck out to test and it was a different ride, still early but it was a smoother ride.
Get back home and my radiator springs a leak.

Lee H · 04-30-2012, 09:44 AM

Looking good Vince!
Posted via Mobile Device

VDOG · 04-30-2012, 12:47 PM

Quote:

Originally Posted by Lee H

Looking good Vince!
Posted via Mobile Device

Thanks Lee!

Now I have to go get a radiator, made it home just in time before it blew out.

Lee H · 04-30-2012, 01:26 PM

It's always something with these old trucks!

VDOG · 04-30-2012, 04:33 PM

Quote:

Originally Posted by Lee H

It's always something with these old trucks!

True! I've needed one since 1998 surprised it lasted this long. LOL

Dano69c10 · 05-01-2012, 05:44 PM

Nice drop job on the truck Vince! Too bad about the radiator though.
Dano

osaltyone · 05-02-2012, 12:11 PM

Posted via Mobile Device

VDOG · 05-02-2012, 02:38 PM

Quote:

Originally Posted by Dano69c10

Nice drop job on the truck Vince! Too bad about the radiator though.
Dano

Thanks Dano.

Now trying to decided if im going to get the dropped spindles, if so it will be done before our meet in the Valley. That would give me a 5 on 5 drop.

JOHNORO · 05-03-2012, 11:21 AM

Looks good Vdog
what spindle you going with ?
Posted via Mobile Device
Posted via Mobile Device

VDOG · 05-03-2012, 04:14 PM

Quote:

Originally Posted by JOHNORO

Looks good Vdog
what spindle you going with ?
Posted via Mobile Device
Posted via Mobile Device

Probably the CPP 2 or 2 1/2 in drop spindle. I have a 3 inch coil in the front so its going to be sick!

Dano69c10 · 05-06-2012, 10:34 AM

Quote:

Originally Posted by vdog

thanks dano.

Now trying to decided if im going to get the dropped spindles, if so it will be done before our meet in the valley. That would give me a 5 on 5 drop.

nice!

VDOG · 05-06-2012, 03:54 PM

Quote:

Originally Posted by Dano69c10

nice!

Decided to not go with the drop spindles for now. Thinking that if I drop 2 1/2 more inches in the front on those 15 inch tires, I would be too low. So I will wait until I decided to change the wheels. Got my radiator fixed for now, 20 bucks. Did not want to install a new one now since I dont have a grill and did not want to damage the a new radiator. Are we still on for the 20th?
The 91FWY Truck Show is that Saturday at Canyon RV Park, same place as the Brothers Truck Show. Anyone going to that?

Dano69c10 · 05-07-2012, 10:03 AM

Quote:

Originally Posted by VDOG

Are we still on for the 20th?

I don't know. Since it seems like no one is committing, then maybe we should cancel and join JohnOro at the Collin's Cruise. Whnat do you think?

JOHNORO · 05-07-2012, 10:14 AM

Quote:

Originally Posted by Dano69c10

I don't know. Since it seems like no one is committing, then maybe we should cancel and join JohnOro at the Collin's Cruise. Whnat do you think?

Yes Come join Denz72,Oldskool71,Nitroblood
and yours truly we would love for you guys to join us

http://67-72chevytrucks.com/vboard/s...d.php?t=520436

04-17-2012, 11:43 PM	#901
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Hey Lee H! Comin' out to the SFV with us? __________________ '69 Fleet It ain't yours, if you didn't build it!

04-17-2012, 11:47 PM	#902
pedro6371 Registered User Join Date: Apr 2008 Location: san fernando valley CA Posts: 169	Re: SoCal checkin' in im down to bring my truck im in the s.f.v

04-18-2012, 12:08 AM	#903
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Allright pedro6371! I'll add you to the list. __________________ '69 Fleet It ain't yours, if you didn't build it!

04-19-2012, 12:52 PM	#908
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Bring da vette! __________________ '69 Fleet It ain't yours, if you didn't build it!

04-28-2012, 12:35 PM	#911
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Bump 4 d Valley Meet! __________________ '69 Fleet It ain't yours, if you didn't build it!

04-30-2012, 12:01 AM	#912
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: SoCal checkin' in So I changed my coils from 4 inch to 5 inch today. Not a bad stance, I still want to add drop spindles and maybe lowering blocks. So I took the truck out to test and it was a different ride, still early but it was a smoother ride. Get back home and my radiator springs a leak. Attached Images

04-30-2012, 09:44 AM	#913
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: SoCal checkin' in Looking good Vince! Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

04-30-2012, 01:26 PM	#915
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: SoCal checkin' in It's always something with these old trucks! __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

05-01-2012, 05:44 PM	#917
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Nice drop job on the truck Vince! Too bad about the radiator though. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

05-02-2012, 12:11 PM	#918
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: SoCal checkin' in Posted via Mobile Device

05-03-2012, 11:21 AM	#920
JOHNORO oldschoolblazer@yahoo.com Join Date: Jun 2007 Location: Long Beach CA. Posts: 1,968	Re: SoCal checkin' in Looks good Vdog what spindle you going with ? Posted via Mobile Device Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.