ROLL CALL (Ohio meet) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fine69** · 07-31-2003, 02:16 PM

ttt

Longhorn Man · 07-31-2003, 04:24 PM

And I will say that Mike is a great guy, I think every time I went there he made me take stuff home. I wouldn't even be asking for something...just checking it out, and he'd say toss it in the back of your truck. That's just how he is.
I doubt a little rain is going to hurt us any.

Alvin · 07-31-2003, 05:43 PM

I'm hoping to make it, but it is definately not a sure thing at this point. Kinda busy with work, wouldn't be able to make it till afternoon/evening on saturday. If I miss it, have a great time, and if your going up I-75, make sure to downshift by the Cincinnati-Dayton Road exit (by my house!!).

dwaite72lnghrn · 07-31-2003, 06:03 PM

I should be leaving around 6:00am Friday grab a hotel at night and see everyone Saturday. Check the map quest thing and it said 480 miles.

Longhorn Man · 07-31-2003, 09:17 PM

longhorn Jeff just called me, he'll be here. The only thing that'll stop him is if the Longhorn craps out on the side of I-70.
He asked me to let y'all know that he is looking for a set of trailing arms, the cheaper the better. A buddy of his needs them for a roundy round car. (dirt track i think he said)

jewels. · 07-31-2003, 11:24 PM

i'd like to add a few things to my shopping list - if anyone has them --- if not, i'll just end up ordering them - but if you have them with you, i will purchase them...

i am looking for:

a driver's side wing-vent window assembly,
rubber seals for both passenger and driver vent windows,
a driver's side window crank mechanism,
a 10ohm speaker for my little GM radio,
350 HEI distributor,
a 1968 hood (no louvers - LOL),
screws for the headlights (both adjustment screws, and assembly screws),

ok- i think thats it for now.
i was just out workin on the truck tonight, and came up with all this stuff.

see yall there!
ciao!

jewels.

**fine69** · 08-01-2003, 08:09 AM

ttt

Longhorn Man · 08-01-2003, 08:40 AM

Jewls, i may be able to get an HEI for you. I plan on going to the yards today if I get a chance, and I'll see if they have anything we could use.
If you bring a set of plug wires, we can install it at Mike's.

big blue 72 · 08-01-2003, 10:52 AM

Back to the top where it belongs.
I'll bring my Hei distributor too if someone with a good back can bend over the fenders for me I'd really appreciate it.
See ya all on Saturday, me and Pierce willl be toolin up I-75 together

jewels. · 08-01-2003, 11:16 AM

Quote:

Originally posted by longhornmail
Jewls, i may be able to get an HEI for you. I plan on going to the yards today if I get a chance, and I'll see if they have anything we could use.
If you bring a set of plug wires, we can install it at Mike's.

aww - thats so sweet - you dont have to go out of your way for me --- i just mentioned the list in case anyone was wanting to sell me one they had!

but its so sweet of you to pick me up one out of the junkyard. i'll be sure to bring wires!

Quote:

by big blue 72 I'll bring my Hei distributor too if someone with a good back can bend over the fenders for me I'd really appreciate it.

no problem big blue --- i am young and small --- i actually crawl under my hood to work on my truck --- i would be more than happy to help out!

see ya there!

jewels

BUXMAN66 · 08-01-2003, 12:28 PM

hey ....guess i'll jump on the band-wagon of needing some things. 1.) pwr.steering pump (smblk.,shrt wtr pmp.single pulley) mine is going bad ,think it might be a pressure relief valve spring. 2.)brake pad chrome bezel trim ring....and matching pas pedal w/it's chrome trim ring. (67-70 type deluxe pedal)

koolgt · 08-01-2003, 12:34 PM

hey yall..i just kinda got around to this thread....i wish i could make it but my dads in canada, and i have a softball tourny, plus right now were having rubbing issues on the front end we have to fix..it awsome to see how many ohio guys are so close to me...maybe i need to make some road trips and check out some other ones

weasel29gm · 08-01-2003, 06:02 PM

Guys I'm gonna make it to the meet!!!!!!! I'm bringin a pair of SWB bedsides, a decent pass. door, Jewels its got everything you need. A older set of Stewart- Warner oil,amp, temp. And some #3 diecast. Can't wait to meet you guys and gals!!!! And thanks Mike for the use of your place. Weasel

**fine69** · 08-01-2003, 10:02 PM

Hey. I hauled 3 parts vehicles today. Already had one here. Now just gotta spiff up the shop. Lookin' forward to meeting some of you. Already met several of you. If you need anything on the way here just call me 937-653-3891.

cheatham · 08-01-2003, 10:57 PM

I can't make it.

I'm pissed off.

Jobs suck.

I WILL be there next time!

JP

Denny · 08-01-2003, 11:04 PM

Sure wish I could make it up there, would love to meet all of you. My torque converter in the 700r is vibrating and I have to go to the tranny shop tuesday so I am afraid to drive much. I have had more trouble with this 700r's converters. Hope everyone has a great time.

**jamie72** · 08-01-2003, 11:06 PM

i make it..but due to all the rain,thats suppose to happen i won`t be in my blazer

i`ll be in the blue z71...looking forward to meeting all you truckaholics....

jamie

1969 GMC · 08-02-2003, 03:29 AM

grrrr....I can't make it. I blew one of my front wheel cylinders yesterday on the way home from work...on the highway, doing approx 60 mph, and came to a red light...pedal hit the floor and nothing. had to go thru the red light and swerve onto my road, missing an oncoming car. luckily the fuzz didn't spot me. scared the crap outta me. anywho, now i can't drive it anywhere until its fixed, can't enter it in the local carshow either, and I don't trust the Festiva to make a 3 hour trip. I was looking forward to ths, I guess it will have to be next time.

lux hauler · 08-02-2003, 09:21 AM

Hope y'all have fun!!
I'm not gunna be able to make it.
I guess were gunna be traveling with some other people that are going to the race tomorrow too.

I hate trying to follow (or having someone else follow) on long trips.
Anyhow, I'm sure you'll have lots of fun.

07-31-2003, 05:43 PM	#53
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	I'm hoping to make it, but it is definately not a sure thing at this point. Kinda busy with work, wouldn't be able to make it till afternoon/evening on saturday. If I miss it, have a great time, and if your going up I-75, make sure to downshift by the Cincinnati-Dayton Road exit (by my house!!). __________________ Ethel - The Legend Continues... Ethel has been sold.

07-31-2003, 06:03 PM	#54
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	I should be leaving around 6:00am Friday grab a hotel at night and see everyone Saturday. Check the map quest thing and it said 480 miles. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

07-31-2003, 11:24 PM	#56
jewels. Registered User Join Date: Jul 2001 Location: Munster, IN Posts: 1,100	i'd like to add a few things to my shopping list - if anyone has them --- if not, i'll just end up ordering them - but if you have them with you, i will purchase them... i am looking for: a driver's side wing-vent window assembly, rubber seals for both passenger and driver vent windows, a driver's side window crank mechanism, a 10ohm speaker for my little GM radio, 350 HEI distributor, a 1968 hood (no louvers - LOL), screws for the headlights (both adjustment screws, and assembly screws), ok- i think thats it for now. i was just out workin on the truck tonight, and came up with all this stuff. see yall there! ciao! jewels. __________________ 68 C10 Red Step 350 my first child & main focus 58 3200 Apache LWB Step the upcoming project

08-01-2003, 12:28 PM	#61
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	hey ....guess i'll jump on the band-wagon of needing some things. 1.) pwr.steering pump (smblk.,shrt wtr pmp.single pulley) mine is going bad ,think it might be a pressure relief valve spring. 2.)brake pad chrome bezel trim ring....and matching pas pedal w/it's chrome trim ring. (67-70 type deluxe pedal) __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

08-01-2003, 06:02 PM	#63
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Guys I'm gonna make it to the meet!!!!!!! I'm bringin a pair of SWB bedsides, a decent pass. door, Jewels its got everything you need. A older set of Stewart- Warner oil,amp, temp. And some #3 diecast. Can't wait to meet you guys and gals!!!! And thanks Mike for the use of your place. Weasel __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

07-31-2003, 02:16 PM	#51
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	ttt

07-31-2003, 04:24 PM	#52
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	And I will say that Mike is a great guy, I think every time I went there he made me take stuff home. I wouldn't even be asking for something...just checking it out, and he'd say toss it in the back of your truck. That's just how he is. I doubt a little rain is going to hurt us any.

07-31-2003, 09:17 PM	#55
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	longhorn Jeff just called me, he'll be here. The only thing that'll stop him is if the Longhorn craps out on the side of I-70. He asked me to let y'all know that he is looking for a set of trailing arms, the cheaper the better. A buddy of his needs them for a roundy round car. (dirt track i think he said)

08-01-2003, 08:09 AM	#57
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	ttt

08-01-2003, 08:40 AM	#58
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Jewls, i may be able to get an HEI for you. I plan on going to the yards today if I get a chance, and I'll see if they have anything we could use. If you bring a set of plug wires, we can install it at Mike's.

08-01-2003, 10:52 AM	#59
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Back to the top where it belongs. I'll bring my Hei distributor too if someone with a good back can bend over the fenders for me I'd really appreciate it. See ya all on Saturday, me and Pierce willl be toolin up I-75 together

08-01-2003, 12:34 PM	#62
koolgt Registered User Join Date: Apr 2003 Location: Arcanum, Ohio Posts: 14	hey yall..i just kinda got around to this thread....i wish i could make it but my dads in canada, and i have a softball tourny, plus right now were having rubbing issues on the front end we have to fix..it awsome to see how many ohio guys are so close to me...maybe i need to make some road trips and check out some other ones

08-01-2003, 10:02 PM	#64
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Hey. I hauled 3 parts vehicles today. Already had one here. Now just gotta spiff up the shop. Lookin' forward to meeting some of you. Already met several of you. If you need anything on the way here just call me 937-653-3891. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

08-01-2003, 10:57 PM	#65
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	I can't make it. I'm pissed off. Jobs suck. I WILL be there next time! JP __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

08-01-2003, 11:04 PM	#66
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Sure wish I could make it up there, would love to meet all of you. My torque converter in the 700r is vibrating and I have to go to the tranny shop tuesday so I am afraid to drive much. I have had more trouble with this 700r's converters. Hope everyone has a great time. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines



Register or Log In To remove these advertisements.

08-01-2003, 11:06 PM	#67
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	i make it..but due to all the rain,thats suppose to happen i won`t be in my blazer i`ll be in the blue z71...looking forward to meeting all you truckaholics.... jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

08-02-2003, 03:29 AM	#68
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	grrrr....I can't make it. I blew one of my front wheel cylinders yesterday on the way home from work...on the highway, doing approx 60 mph, and came to a red light...pedal hit the floor and nothing. had to go thru the red light and swerve onto my road, missing an oncoming car. luckily the fuzz didn't spot me. scared the crap outta me. anywho, now i can't drive it anywhere until its fixed, can't enter it in the local carshow either, and I don't trust the Festiva to make a 3 hour trip. I was looking forward to ths, I guess it will have to be next time. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

08-02-2003, 09:21 AM	#69
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Hope y'all have fun!! I'm not gunna be able to make it. I guess were gunna be traveling with some other people that are going to the race tomorrow too. I hate trying to follow (or having someone else follow) on long trips. Anyhow, I'm sure you'll have lots of fun. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

Register or Log In To remove these advertisements.