The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-25-2019, 03:36 PM   #1
UATahoe
Registered User
 
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
With Vintage Air systems, are you guys running an RPM cutoff switch?

I am using the Sanden compressor in Holley's midmount accessory drive system and i know a lot mention an rpm cutoff switch. There is even a paper in the compressor box talking about it. The compressor in the Holley kit is the SD7B10. I am just curious though because when you go off the Sanden service guide data, it specifically states that that specific compressor is rated at 6500 constant rpm's and a spike of 9300. Just seems like nothing external should be needed given that data.
UATahoe is offline   Reply With Quote
Old 02-25-2019, 04:05 PM   #2
Willie Makeit
Registered User
 
Willie Makeit's Avatar
 
Join Date: Oct 2013
Location: Alabama
Posts: 1,204
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

I ran a Sanden on a supercharged 5.3 and spun it as high as 6,500-7,000 and never had any issues.

Nice to see another North Alabamian on the board. Athens-area here.
Willie Makeit is offline   Reply With Quote
Old 02-25-2019, 04:09 PM   #3
UATahoe
Registered User
 
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

Likewise man! My build has taken forever but i am hoping to start making some good traction here soon. Have a ton of parts, now just need to make the time to get it finished up. Good to hear on the compressor. It really seems like everything should be fine without the cutoff.
UATahoe is offline   Reply With Quote
Old 02-25-2019, 11:58 PM   #4
sprint_9
Registered User
 
sprint_9's Avatar
 
Join Date: Nov 2012
Location: 9
Posts: 862
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

You fail to take into account pulley diameters when considering RPM. I dont remember the exact numbers, but I think I figured something like a 2:1 ratio, the AC compressor will spin 2 times for the cranks every 1 time.

So if you have a similar pulley ratio and run the engine to 6000 your compressor will spike at 12000.
sprint_9 is offline   Reply With Quote
Old 02-26-2019, 12:14 AM   #5
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

You can always do what we used to do in the good old days, just shut the A/C off if you're going to flog it. At least that's what I do...
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 02-26-2019, 12:31 AM   #6
UATahoe
Registered User
 
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

I think that may be the approach I take. This truck is going to be a cruiser and not a drag vehicle. If I get the wild hair to beat on it I will just make sure the ac is off. Lol
UATahoe is offline   Reply With Quote
Old 02-26-2019, 07:23 PM   #7
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: With Vintage Air systems, are you guys running an RPM cutoff switch?

I am installing a high rpm/wot switch on mine. That way it's done right and if someone else is driving the truck (like my tuner), I don't have to worry about it.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com