Static Dropped 67-72 Post your pics! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fast&low · 12-14-2015, 09:27 AM

Blue/72
That is a nice looking truck there brother!!!!
What wheel & tire combo you running & also did you narrow your diff to get that deep dish in the back?
Thank you for sharing

jondancer · 12-14-2015, 12:13 PM

Quote:

Originally Posted by Elliot949

1967 Chevy C-20 Short Fleetside "Raymond" : ECE Front 5.5", Rear 7"

1971 Chevy 6" Front, 7" rear "Haulin":

These are nice trucks but hey don't even look lowered, definitely not 5/7 drops!

**davischevy** · 12-14-2015, 08:18 PM

Quote:

Originally Posted by iostorm

Can you tell me specifically what spindles and springs? I like that has a slight rake to it.

Spindles, springs and shocks came from ECE.

Note the tires on the TT wheels were staggered. The Torque Thrusts are gone now, but I think the tires were 275/40/17 rear and 255/40/17 rear.

The white wall tires in the second pic are all the same size.

CST10 · 12-14-2015, 08:23 PM

Quote:

Originally Posted by dell72

What size tires are you running front and rear? I like the stance your truck has.

Goldilocks has 215/75/15 fronts and 255/70/15 rears. Rear tires bout 1-3/8" taller to give it that ol school rubber rake, reminds me if what was running round back in the day. Also helps the cruisin rpm with 3.73 rear gears.

You could go 225/75/15 on the front but would only be about 3/4" rake. But it would slightly fill the wheel wells better.

**Blue/72** · 12-14-2015, 08:30 PM

Quote:

Originally Posted by fast&low

Blue/72
That is a nice looking truck there brother!!!!
What wheel & tire combo you running & also did you narrow your diff to get that deep dish in the back?
Thank you for sharing

Stock 69 rear diff and the wheels are 20x8.5 fronts with 4.5 off set and 20x10 rear with 5.5 off set from Chris Cottington Hot Rods by Boyds series JR5.

fast&low · 12-14-2015, 08:33 PM

When you say offset you mean backspacing?

**CC69Rat** · 12-14-2015, 09:31 PM

Quote:

Originally Posted by fast&low

When you say offset you mean backspacing?

Good explanation

http://www.tsw.com/explore/what-is-wheel-offset.php

Sklptrljay · 12-15-2015, 02:18 AM

Ol' Mabel.....

**Elliot949** · 12-15-2015, 07:39 AM

Quote:

Originally Posted by Sklptrljay

Ol' Mabel.....

Now that is a good looking Truck...

tmontg01 · 05-27-2016, 12:41 AM

Just got my ECE 4/6 drop installed, couldn't be happier! Just waiting for my VN327's to be made

cr1hotrod · 05-28-2016, 12:27 AM

4/6 ECE ended up being 4.5/6.5
235/75 15

Jgw82 · 05-28-2016, 04:12 PM

5-7
20x8.5
255-40-20
20x10
295-40-20
http://67-72chevytrucks.com/vboard/a...1&d=1464466188

Rellim51 · 05-29-2016, 09:55 AM

My shop truck. 5/7 drop

snipescastle2 · 05-29-2016, 11:39 AM

here's mine, 2 1/2" drop spindles, 2" drop front coils, 4" drop rear coils

Ben

Boyd67 · 05-29-2016, 11:57 PM

Good looking trucks! Can't wait to get to do mine.

Boyd67 · 05-30-2016, 12:16 AM

Quote:

Originally Posted by fatboys69

CPP 4" drop springs in rear
Control Freaks 1-1/2" drop tubular upper and lower control arms
McGaughys 2-1/2" drop spindles w/ stock springs in front
18x8 Coys w/255/50/r18 Goodyear LS on front
20x8-1/2 w/275/50/r20 Goodyear LS on rear

72blackbuty, LOVE the white along the bottom of yours, amkes me ant to shoot some white on mine. NICE TRUCK !!

Do they make control arms for our trucks or did you put arms made for something else on it? There website doesn't really give any info on control arms.

683/4farm · 09-15-2016, 05:12 PM

seems like a few of these pictures that have 5/7 drop with 15" wheels that some are way low and some are not so much that there is major difference with just looking at it, any reasons why?

fast&low · 09-15-2016, 05:32 PM

Some are done the right way & some are not some people buy drop springs some people cut their existing springs that may or may not be worn out (sagging)
Never go by another mans drop his spring may or may not be as good as the one you're using a cheap spring may be labeled 1 1/2 inch drop & give you a 2" drop.
And another thing on a DD I wouldn't recommend a 5/7 drop unless where you live they have really good streets. I'm in Houston,TX so that's a big no-no for me.
Hope that helped

hardwaycooke · 09-15-2016, 06:32 PM

was 5.75 front and 7 rear
--due to extra weight from blower is now 3.5 front/7 rear but sits almost as low in front as before...

mywifestruck · 09-15-2016, 07:45 PM

Quote:

Originally Posted by Rellim51

My shop truck. 5/7 drop

That is perfect. Very nice looking. Exactly what I want mine to look like.

Thanks for sharing

jondancer · 09-15-2016, 08:18 PM

Mines the real deal 5/7

sKnNyPpY · 09-17-2016, 06:05 PM

CPP 2.5" Drop Spindles and 1" Drop springs. DJM Flip Kit with new leafs from SD Truck Springs and relocated rear shocks. For 3.5/6 drop.

Name: b-side prof.jpg
Views: 5559
Size: 80.0 KB

Name: b-side prof.jpg
Views: 5559
Size: 80.0 KB

cruisinthe34 · 09-17-2016, 06:51 PM

Just completed ECE 4/6 Drop with Coy's C-5 235/55R17 4.5" B/S on front and 255/55R18 rear 5" B/S

mosel70 · 12-23-2016, 12:28 PM

'70, original 402, ps/on/ac. I put on CPP front 2 1/2" drop spindles disc brakes with tubular upper/lower arms. No change in front springs or shocks. Rear has coils only, put on CPP 3" drop coils. Plenty of room underneath, thinking of going to 4" or 5".

**68bowtie** · 12-23-2016, 01:07 PM

4/5, 15x10 295/60, 15x8 245/60

Name: IMG_1900.jpg
Views: 5298
Size: 42.1 KB

12-14-2015, 09:27 AM	#51
fast&low Registered User Join Date: Jan 2014 Location: Houston,TX Posts: 258	Re: Static Dropped 67-72 Post your pics! Blue/72 That is a nice looking truck there brother!!!! What wheel & tire combo you running & also did you narrow your diff to get that deep dish in the back? Thank you for sharing

12-14-2015, 08:33 PM	#56
fast&low Registered User Join Date: Jan 2014 Location: Houston,TX Posts: 258	Re: Static Dropped 67-72 Post your pics! When you say offset you mean backspacing?

12-15-2015, 02:18 AM	#58
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: Static Dropped 67-72 Post your pics! Ol' Mabel..... Attached Images __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy

05-27-2016, 12:41 AM	#60
tmontg01 Registered User Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 391	Re: Static Dropped 67-72 Post your pics! Just got my ECE 4/6 drop installed, couldn't be happier! Just waiting for my VN327's to be made Attached Images

05-28-2016, 12:27 AM	#61
cr1hotrod Registered User Join Date: Jun 2012 Location: Longmont, CO Posts: 42	Re: Static Dropped 67-72 Post your pics! 4/6 ECE ended up being 4.5/6.5 235/75 15 Attached Images __________________ 1967 Longbed 4/6 static 2007 Silverado Z71 Crew

05-28-2016, 04:12 PM	#62
Jgw82 Registered User Join Date: Jan 2016 Location: Choctaw Oklahoma Posts: 4	Re: Static Dropped 67-72 Post your pics! 5-7 20x8.5 255-40-20 20x10 295-40-20 http://67-72chevytrucks.com/vboard/a...1&d=1464466188 Attached Images

05-29-2016, 09:55 AM	#63
Rellim51 Registered User Join Date: Aug 2011 Location: Martin, TN Posts: 26	Re: Static Dropped 67-72 Post your pics! My shop truck. 5/7 drop

05-29-2016, 11:39 AM	#64
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Static Dropped 67-72 Post your pics! here's mine, 2 1/2" drop spindles, 2" drop front coils, 4" drop rear coils Ben Attached Images __________________ "Persistence is the twin sister of Excellence.one is a matter of quality,the other, a matter of time" “Serious Black” my 1971 Short Bed Fleetside Sold to an outstanding man in Lees Summit,Mo. “Gone, but by no means,Forgotten”

05-29-2016, 11:57 PM	#65
Boyd67 Registered User Join Date: Feb 2016 Location: China Grove, NC Posts: 93	Re: Static Dropped 67-72 Post your pics! Good looking trucks! Can't wait to get to do mine. __________________ Boyd -67' C10 SWB FLEETSIDE LS 5.3 4 speed muncie

09-15-2016, 05:12 PM	#67
683/4farm Registered User Join Date: Apr 2016 Location: Emmett mi Posts: 44	Re: Static Dropped 67-72 Post your pics! seems like a few of these pictures that have 5/7 drop with 15" wheels that some are way low and some are not so much that there is major difference with just looking at it, any reasons why?

09-15-2016, 05:32 PM	#68
fast&low Registered User Join Date: Jan 2014 Location: Houston,TX Posts: 258	Re: Static Dropped 67-72 Post your pics! Some are done the right way & some are not some people buy drop springs some people cut their existing springs that may or may not be worn out (sagging) Never go by another mans drop his spring may or may not be as good as the one you're using a cheap spring may be labeled 1 1/2 inch drop & give you a 2" drop. And another thing on a DD I wouldn't recommend a 5/7 drop unless where you live they have really good streets. I'm in Houston,TX so that's a big no-no for me. Hope that helped

09-15-2016, 06:32 PM	#69
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	Re: Static Dropped 67-72 Post your pics! was 5.75 front and 7 rear --due to extra weight from blower is now 3.5 front/7 rear but sits almost as low in front as before... Attached Images __________________ 71 LWB Large Bore 6-71 Blown 383 Stroker 4.11 Motive/EOM Eaton Posi Ported/Polished Carrier 15x8/15x16.5 MT Radials B&M Pro Shifter Truck Name- Spike

09-15-2016, 08:18 PM	#71
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,192	Re: Static Dropped 67-72 Post your pics! Mines the real deal 5/7

09-17-2016, 06:05 PM	#72
sKnNyPpY Registered User Join Date: Sep 2012 Location: Columbia, SC Posts: 549	Re: Static Dropped 67-72 Post your pics! CPP 2.5" Drop Spindles and 1" Drop springs. DJM Flip Kit with new leafs from SD Truck Springs and relocated rear shocks. For 3.5/6 drop. __________________ Life is too long to go slow... 71 GMC 1500 Super Custom LWB 350/350 AC(replaced w/vintage air)/PS/PB 2.5 CPP Spindle, 1" CPP Drop Spring, CPP Front and Rear Sway Bars/DJM Flip, new General Spring KC 5 spring pack, HEI /IntReg Alt 20x8.5 OldSkools 5" BS, 275/45 Falkens Last edited by sKnNyPpY; 09-17-2016 at 06:11 PM.

09-17-2016, 06:51 PM	#73
cruisinthe34 Registered User Join Date: Sep 2015 Location: Charleston, WV Posts: 228	Re: Static Dropped 67-72 Post your pics! Just completed ECE 4/6 Drop with Coy's C-5 235/55R17 4.5" B/S on front and 255/55R18 rear 5" B/S __________________ Steve My Build Thread: http://67-72chevytrucks.com/vboard/s...=morning+glory 1971 C10 Inline 6 250 700R4 "Marlene" 1934 Chevrolet Master Sedan 350 700R4 "Iris" 1941 Ford 1/2 Ton 5.0 H.O Roller C-4 "Rose" 2019 Honda Ridgeline



Register or Log In To remove these advertisements.

12-23-2016, 12:28 PM	#74
mosel70 Registered User Join Date: Jul 2016 Location: Las Vegas, NV Posts: 116	Re: Static Dropped 67-72 Post your pics! '70, original 402, ps/on/ac. I put on CPP front 2 1/2" drop spindles disc brakes with tubular upper/lower arms. No change in front springs or shocks. Rear has coils only, put on CPP 3" drop coils. Plenty of room underneath, thinking of going to 4" or 5". Attached Images

12-23-2016, 01:07 PM	#75
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,340	Re: Static Dropped 67-72 Post your pics! 4/5, 15x10 295/60, 15x8 245/60 __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

Register or Log In To remove these advertisements.