Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davepl · 12-21-2015, 03:26 PM

Wow, I really need one of these setups complete. I have the "shraeder fill" manual kind. Right now I have too much rake anyway, so haven't installed it yet.

BTW, on the topic of concealed carry and newly acquired firearms, I should throw this out there. I have three of them (non-fingerprint kind). Since a gun should be in a holster or a safe and never elsewhere, this makes it trivial:

http://www.gunvault.com/

**DeadheadNM** · 12-22-2015, 01:10 AM

I have a complete NOS Pleasur-lift set up (not what's pictured above, another w hoses, mount hardware, etc. complete) - my brother shows no interest in using it on his 66 GTO sadly. If interested, shoot me a PM.

kehstr · 05-01-2020, 03:02 PM

Sorry to revive a almost 5 year old thread, but I just got ahold of a gauge like you have pictured here, and want to set it up like Andy did.
My question. What line went where in the back of the gauge, and is the plug that is there suppose to be there? Just unsure how the gauge works

Andy4639 · 05-01-2020, 10:07 PM

Quote:

Originally Posted by kehstr

Sorry to revive a almost 5 year old thread, but I just got ahold of a gauge like you have pictured here, and want to set it up like Andy did.
My question. What line went where in the back of the gauge, and is the plug that is there suppose to be there? Just unsure how the gauge works

Do you have the Vacuum pump also? One line is for the vacuum and the other is to go to the shocks.

I have this in the Ramp truck now hooked up to my air tank for pumping up tires and such. The fittings are the orignal's for it. I have a couple of extra's just in case one fails.

Andy4639 · 05-01-2020, 10:12 PM

Here is how it looks now. I plugged the one inlet off since all this is a gauge for the air tank. I'm not using the vacuum pump.

kehstr · 05-02-2020, 12:18 AM

Quote:

Originally Posted by Andy4639

Do you have the Vacuum pump also? One line is for the vacuum and the other is to go to the shocks.

After looking at your pictures I went right out to the garage and put air on the fitting on the gauge side. Gauge worked perfect! Pushed the center button, and the pressure bled off perfectly!

I plan to just use it as a gauge and do a momentary contact switch to an electric pump to air up my air helper springs just like you did earlier in the thread.

Where did you get a fitting to go into the back of the gauge?

I also am curious even though it is not relavent to me setting it up properly. How is the knob suppose to work? Is it suppose to allow more pressure the more you turn it??

Andy4639 · 05-02-2020, 07:22 AM

Quote:

Originally Posted by kehstr

After looking at your pictures I went right out to the garage and put air on the fitting on the gauge side. Gauge worked perfect! Pushed the center button, and the pressure bled off perfectly!

I plan to just use it as a gauge and do a momentary contact switch to an electric pump to air up my air helper springs just like you did earlier in the thread.

Where did you get a fitting to go into the back of the gauge?

I also am curious even though it is not relavent to me setting it up properly. How is the knob suppose to work? Is it suppose to allow more pressure the more you turn it??

The knob is how you turned the Vacuum pump on when used. It didn't change pressure it was a ON/OFF only.

kehstr · 07-10-2020, 04:42 PM

I appreciate your help Andy!
One final question.
Do you remember the part number for the fitting that holds the line in the back of the gauge? Or at least where you got it

Andy4639 · 07-10-2020, 10:12 PM

Quote:

Originally Posted by kehstr

I appreciate your help Andy!
One final question.
Do you remember the part number for the fitting that holds the line in the back of the gauge? Or at least where you got it

Those fittings where what my dad had left over when he gave it to me. I got a few more from a member on here but ended up using all of them. I have no part numbers and not home to look.

kehstr · 07-10-2020, 11:34 PM

Quote:

Originally Posted by Andy4639

Those fittings where what my dad had left over when he gave it to me. I got a few more from a member on here but ended up using all of them. I have no part numbers and not home to look.

Okay I understand. If you do find a part number would you please post it here?

Andy4639 · 07-11-2020, 09:52 AM

Quote:

Originally Posted by kehstr

Okay I understand. If you do find a part number would you please post it here?

Will do sir!

12-21-2015, 03:26 PM	#51
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? Wow, I really need one of these setups complete. I have the "shraeder fill" manual kind. Right now I have too much rake anyway, so haven't installed it yet. BTW, on the topic of concealed carry and newly acquired firearms, I should throw this out there. I have three of them (non-fingerprint kind). Since a gun should be in a holster or a safe and never elsewhere, this makes it trivial: http://www.gunvault.com/ __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

12-22-2015, 01:10 AM	#52
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,284	Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? I have a complete NOS Pleasur-lift set up (not what's pictured above, another w hoses, mount hardware, etc. complete) - my brother shows no interest in using it on his 66 GTO sadly. If interested, shoot me a PM. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 12-22-2015 at 01:16 AM. Reason: more detail added

05-01-2020, 03:02 PM	#53
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 748	Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? Sorry to revive a almost 5 year old thread, but I just got ahold of a gauge like you have pictured here, and want to set it up like Andy did. My question. What line went where in the back of the gauge, and is the plug that is there suppose to be there? Just unsure how the gauge works Attached Images __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

05-01-2020, 10:12 PM	#55
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? Here is how it looks now. I plugged the one inlet off since all this is a gauge for the air tank. I'm not using the vacuum pump. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-10-2020, 04:42 PM	#58
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 748	Re: Anyone: Delco Pleasur-lift air shocks w POWER PAC compressor? I appreciate your help Andy! One final question. Do you remember the part number for the fitting that holds the line in the back of the gauge? Or at least where you got it __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.