What did you do to your truck today! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ges55 · 07-05-2011, 09:01 AM

I was driving in the 3/4 ton to pick up a sink & vanity yesterday & I noticed that the gas gauge was only less than a 1/4 tank. I had over 1/2 a tank the day before. I got home & found gasoline on the white rock where I park it. So I crawled under & found that the rubber gas line from the tank was kaput. Replaced & all is good except for losing about $20 worth of gas. At least it was an easy fix. I love easy fixes. Oh yeah, I also put windshield sealer up on the driver's side upper corner where I found that it was leaking the other day when I was driving on the highway in the rain. I don't think I had done that much with this truck, because I hadn't noticed it before.

bc gman · 07-10-2011, 01:21 AM

Started to put the bedwood back onto the truck ( what a pain in the ass ) I must of made 200 trips up and down trying to set everything another set of hands would of made it much easier and then I noticed that i am one small bed bolt and one large bed bolt too short.

8door · 10-16-2011, 11:00 AM

Got a few things done.
New set of Dayco Top Cog belts, new vacuum and fuel lines.
And painted wheels last week , then mounted four new
Cooper HT tires.

lil hoodlum · 10-16-2011, 11:19 AM

8door those steelies came out very nice. What size are they? 15x6 or 15x8.

They look great.

Keith

8door · 10-16-2011, 12:23 PM

Keith
Stock 5.5 x 15. Aluminum caps and stainless ring.

68C20 CST · 07-01-2012, 01:52 AM

Got all the sidemarker wiring fixed and now working.

magwakeenercew2jh · 07-01-2012, 04:54 PM

I must be getting SOMEWHERE....I now have a list!!!!

Today, it was:

Finish wiring the electric windows; Cut and install kick panel(s) carpet; Install both door panels.

dhaymaker · 07-01-2012, 06:51 PM

When you get to the "punch card", you're well on your way! I've been watching your build and it's really nice to see you working towards the ultimate realization of your plans and dreams. All too often people give up on their projects...doesn't look like that's happening here. Keep after it, we are watching and you are providing a lot of motivation for some of the other builders. Thanks, and good luck. It won't be long now! don

ole dollor · 07-23-2012, 09:49 PM

i took the tires off ole dollar and made them white walls....sure looks good with white wall's ...

bollybib · 07-23-2012, 10:17 PM

I finally got around to replacing this POS upper bed trim piece with a nicer one I bought in the Parts Board.

Name: 100_7016.jpg
Views: 523
Size: 32.2 KB

Nice driver quality. I had to straighten it a little, fill a couple of holes, and repaint it.

Name: 100_7014.jpg
Views: 524
Size: 51.7 KB

(looks like my date on the cam is off by a day, i'll have to fix that)

in deep 72 · 07-23-2012, 10:52 PM

I got mine dirty. LOL

BrianPlaster · 09-26-2012, 08:56 PM

drove it to work ...

Ike72 · 12-11-2012, 10:13 PM

I drove around breaking in a new 454. Just got it installed and running last week. Does anyone have an opinion on break-in? Should I baby it or drive it like I stole it?

ole dollor · 12-11-2012, 10:42 PM

can not speak for everyone, but i would drive it normal for a few miles, then try it out a little and see what you have....just me.

**TBONE1964** · 12-23-2012, 11:15 AM

Quote:

Originally Posted by Ike72

I drove around breaking in a new 454. Just got it installed and running last week. Does anyone have an opinion on break-in? Should I baby it or drive it like I stole it?

First of all, sorry for your loss Jason, I lost my father when he was a very young 51 to cancer. It is a rotten disease. Keep his memory alive and know he will always be proud of you.

It may be late to mention this or maybe you are aware but the most important is the first 20 minutes while breaking in the cam. It is important to valve train life.

They say go easy for the first 500 miles and I think if it is going to break it will with in the first 50 no matter how you drive it.

Good Luck, Have Fun and Happy Holidays

Codez67Chevy · 12-17-2012, 11:16 PM

I looked at my truck but thats about it. Need money.

Posted via Mobile Device

damianbryand · 02-23-2013, 10:04 PM

Put the motor in for the first time. Slowly coming to life!
Posted via Mobile Device

clb1024 · 03-10-2013, 11:35 PM

I fixed a hood that wouldn't shut, and they don't look half bad!
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

clb1024 · 03-10-2013, 11:36 PM

Posted via Mobile Device

Lou Boffa · 04-16-2013, 03:50 PM

I missed it. Having new AC/heating system installed. First time I've let anyone else work on it and I'm having seperation anxiety. Should be done by Friday.

lolo33 · 04-16-2013, 04:00 PM

I want to drive my truck ... but problem : new battery, new regulator, but same issue, low battery after some miles. it seems to me that battery passes off by driving, not in the stop !
any idea ?
is it possible that the starter puts itself in short circuit and empties the battery by driving ? I drive only by the day, and just after 10 miles, good new battery is empty

thanks for help

**Palf70Step** · 04-16-2013, 06:00 PM

Quote:

Originally Posted by lolo33

I want to drive my truck ... but problem : new battery, new regulator, but same issue, low battery after some miles. it seems to me that battery passes off by driving, not in the stop !
any idea ?
is it possible that the starter puts itself in short circuit and empties the battery by driving ? I drive only by the day, and just after 10 miles, good new battery is empty

thanks for help

Factory gauges or any add ons?

Sounds like the alternator/regulator are not adjusted correctly

It would be good to see what the differences in the voltage are while driving or what is coming out of the alternator.

As mentioned a small multimeter check across the battery terminals to watch your voltage draw/changes at RPMs is a quick easy way to go.

Also are you required to drive with your lights on all the time over there?

1970CarolinaK10 · 04-21-2013, 09:37 PM

Fixed the headlight/dimmer switch. Tomorrow the Tachometer and fuel gauge.

jgb7038 · 04-21-2013, 09:59 PM

Got the new starter and aux. solenoid installed on the panel truck.

magwakeenercew2jh · 04-22-2013, 10:29 PM

Made this out of stuff from around the house. It's gonna ger a piano hinge and some magnetic "keep it closed" and a hidden "opener".

I made it to house a bucks-up Pioneer electronics set up that used to be mine and my friend is giving back. DVD player, Nav, etc. I'll also punch
holes in the "door" for a white faced clock and a manifold vacuum gauge, I think.

Not sure if I'll do it or not, but I'm also always looking for a smart place for Mr. Smith to ride.

I HATE digging around with a spagetti dinner of wiring in close quarters.. So, I'll be able to open the door and get at everything.

07-05-2011, 09:01 AM	#1
ges55 BLACK SATIN Join Date: Jan 2009 Location: canton, IL Posts: 266	Re: What did you do to your truck today! I was driving in the 3/4 ton to pick up a sink & vanity yesterday & I noticed that the gas gauge was only less than a 1/4 tank. I had over 1/2 a tank the day before. I got home & found gasoline on the white rock where I park it. So I crawled under & found that the rubber gas line from the tank was kaput. Replaced & all is good except for losing about $20 worth of gas. At least it was an easy fix. I love easy fixes. Oh yeah, I also put windshield sealer up on the driver's side upper corner where I found that it was leaking the other day when I was driving on the highway in the rain. I don't think I had done that much with this truck, because I hadn't noticed it before. __________________ 67 C10 Fleetside LWB-283, 3 on the tree,power assisted steering, father-in-law bought it new 67 C20 Fleetside LWB-'85 305 V8 (original was 250 6 cyl), Holley 600 carb, full length Hedman headers, dual exhaust behind the back wheels, 4 spd , manual steering 85 C10 Silverado- 305ci Last edited by ges55; 07-05-2011 at 09:13 AM.

07-10-2011, 01:21 AM	#2
bc gman 71 bb longhorn Join Date: May 2004 Location: Surrey B.C Canada Posts: 170	Re: What did you do to your truck today! Started to put the bedwood back onto the truck ( what a pain in the ass ) I must of made 200 trips up and down trying to set everything another set of hands would of made it much easier and then I noticed that i am one small bed bolt and one large bed bolt too short. __________________ 71 2500 Gmc longhorn with a 402 turbo 400. 09 F150 Supercrew 4x4 05 Mazda 6 sport accept that somedays you are the statue and somedays you are the pigeon.

10-16-2011, 11:00 AM	#3
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Re: What did you do to your truck today! Got a few things done. New set of Dayco Top Cog belts, new vacuum and fuel lines. And painted wheels last week , then mounted four new Cooper HT tires. Attached Images __________________ 1968 C10 a way to long restoration.

10-16-2011, 11:19 AM	#4
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,696	Re: What did you do to your truck today! 8door those steelies came out very nice. What size are they? 15x6 or 15x8. They look great. Keith

10-16-2011, 12:23 PM	#5
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Re: What did you do to your truck today! Keith Stock 5.5 x 15. Aluminum caps and stainless ring. Attached Images __________________ 1968 C10 a way to long restoration.

07-01-2012, 01:52 AM	#6
68C20 CST Registered User Join Date: Jun 2012 Location: Idaho Posts: 41	Re: What did you do to your truck today! Got all the sidemarker wiring fixed and now working.

07-01-2012, 04:54 PM	#7
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! I must be getting SOMEWHERE....I now have a list!!!! Today, it was: Finish wiring the electric windows; Cut and install kick panel(s) carpet; Install both door panels. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

07-01-2012, 06:51 PM	#8
dhaymaker Registered User Join Date: Jan 2006 Location: Peyton, CO Posts: 448	Re: What did you do to your truck today! When you get to the "punch card", you're well on your way! I've been watching your build and it's really nice to see you working towards the ultimate realization of your plans and dreams. All too often people give up on their projects...doesn't look like that's happening here. Keep after it, we are watching and you are providing a lot of motivation for some of the other builders. Thanks, and good luck. It won't be long now! don __________________ don "The DRBMan" 2014 Audi A4 (The Wife's Daily Driver) 2017 HD Ultra (The Cruiser) 2003 HD Fatboy (The Ride) 2001 Chevy Suburban (Another back up!!) For the first time in forever, not a single 67-72 Chevy truck, Blazer, or Suburban on the property! Basically retired and getting the new Motorhome ready for some traveling. Doing a bit of work on the house getting it ready to sell! LOL!!

07-23-2012, 09:49 PM	#9
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today! i took the tires off ole dollar and made them white walls....sure looks good with white wall's ...

07-23-2012, 10:17 PM	#10
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: What did you do to your truck today! I finally got around to replacing this POS upper bed trim piece with a nicer one I bought in the Parts Board. Nice driver quality. I had to straighten it a little, fill a couple of holes, and repaint it. (looks like my date on the cam is off by a day, i'll have to fix that) __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

07-23-2012, 10:52 PM	#11
in deep 72 Registered User Join Date: Jul 2012 Location: Lisbon ND Posts: 111	Re: What did you do to your truck today! I got mine dirty. LOL

09-26-2012, 08:56 PM	#12
BrianPlaster Registered User Join Date: Feb 2012 Location: Carrboro NC Posts: 71	Re: What did you do to your truck today! drove it to work ...

12-11-2012, 10:13 PM	#13
Ike72 Registered User Join Date: Jul 2012 Location: Orem, Utah Posts: 7	Re: What did you do to your truck today! I drove around breaking in a new 454. Just got it installed and running last week. Does anyone have an opinion on break-in? Should I baby it or drive it like I stole it? Attached Images

12-11-2012, 10:42 PM	#14
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today! can not speak for everyone, but i would drive it normal for a few miles, then try it out a little and see what you have....just me.

12-17-2012, 11:16 PM	#16
Codez67Chevy Registered User Join Date: Nov 2012 Location: Spanish Fork Ut Posts: 370	Re: What did you do to your truck today! I looked at my truck but thats about it. Need money. Posted via Mobile Device __________________ " Dead Pumpkin" 67 Chevy short bed, 292 I6, 4spd manual. Fan of the "Slant Noses". 93' Toyota pickup 2WD 2dr and 32mpg. Daily driver. 300k+ Members I've met... Mister-B



Register or Log In To remove these advertisements.

02-23-2013, 10:04 PM	#17
damianbryand Registered User Join Date: Feb 2013 Location: cedar park texas Posts: 31	Re: What did you do to your truck today! Put the motor in for the first time. Slowly coming to life! Posted via Mobile Device Attached Images

03-10-2013, 11:35 PM	#18
clb1024 Registered User Join Date: Mar 2012 Location: Middleburg, FL Posts: 210	Re: What did you do to your truck today! I fixed a hood that wouldn't shut, and they don't look half bad! Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Favorite quote: "I'm sick and tired of being sick and tired B¡±@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape) 04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather)

03-10-2013, 11:36 PM	#19
clb1024 Registered User Join Date: Mar 2012 Location: Middleburg, FL Posts: 210	Re: What did you do to your truck today! Posted via Mobile Device Attached Images __________________ Favorite quote: "I'm sick and tired of being sick and tired B¡±@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape) 04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather)

04-16-2013, 03:50 PM	#20
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: What did you do to your truck today! I missed it. Having new AC/heating system installed. First time I've let anyone else work on it and I'm having seperation anxiety. Should be done by Friday.

04-16-2013, 04:00 PM	#21
lolo33 Registered User Join Date: Jun 2012 Location: Givors - FRANCE Posts: 109	Re: What did you do to your truck today! I want to drive my truck ... but problem : new battery, new regulator, but same issue, low battery after some miles. it seems to me that battery passes off by driving, not in the stop ! any idea ? is it possible that the starter puts itself in short circuit and empties the battery by driving ? I drive only by the day, and just after 10 miles, good new battery is empty thanks for help __________________ '70 C10 shortbed - 350 Edelbrock equipped - 4/1 headers - 3" flowmaster exausts '07 MUSTANG V8 convertible - CAI Spectre - Brembo's - 3" flowmaster exhausts

04-21-2013, 09:37 PM	#23
1970CarolinaK10 Registered User Join Date: Jan 2013 Location: aberdeen Posts: 11	Re: What did you do to your truck today! Fixed the headlight/dimmer switch. Tomorrow the Tachometer and fuel gauge.

04-21-2013, 09:59 PM	#24
jgb7038 Registered User Join Date: Jan 2010 Location: ft.wayne,indiana Posts: 151	Re: What did you do to your truck today! Got the new starter and aux. solenoid installed on the panel truck.

04-22-2013, 10:29 PM	#25
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! Made this out of stuff from around the house. It's gonna ger a piano hinge and some magnetic "keep it closed" and a hidden "opener". I made it to house a bucks-up Pioneer electronics set up that used to be mine and my friend is giving back. DVD player, Nav, etc. I'll also punch holes in the "door" for a white faced clock and a manifold vacuum gauge, I think. Not sure if I'll do it or not, but I'm also always looking for a smart place for Mr. Smith to ride. I HATE digging around with a spagetti dinner of wiring in close quarters.. So, I'll be able to open the door and get at everything. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat. Last edited by magwakeenercew2jh; 04-23-2013 at 12:17 AM.

Register or Log In To remove these advertisements.