CA Cpp stock height disk brake spindle 1970 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 08-30-2013, 06:43 PM

Hello,

These are from my 1970 C-10. Cpp stock height disk brake spindle.

$100 for the set. I will ship these.

sold.

**70STOVEBOLT** · 08-31-2013, 09:06 AM

What ball joints and tie rod ends would need to be used with these? And is that $100 shipped?

**lolife99** · 08-31-2013, 09:08 AM

IF these are 63-70 conversion stock height spindles,... they use 63-70 balljoints and outer tie rods.
(which also means they will fit any 63-70 trucks)

**70STOVEBOLT** · 08-31-2013, 09:10 AM

Is there an aftermarket spindle made for disc brakes that uses 63-70 parts?

**lolife99** · 08-31-2013, 09:21 AM

Quote:

Originally Posted by 70STOVEBOLT

Is there an aftermarket spindle made for disc brakes that uses 63-70 parts?

I belive that is what these are.
Title says CPP.

Most spindle companies make stock height and drop spindles in the following years.
60-62
63-70
71-72
73-87

**70STOVEBOLT** · 08-31-2013, 09:29 AM

Keith, I should have read your links in your sig before posting. I completely missed the Cpp in the title. Thanks for the excellent info. djw32 I will take these pending total shipped.

19stepSide72 · 08-31-2013, 11:54 AM

I will jump in line just In case. Was going to buy these this weekend on cpp.
Posted via Mobile Device

djw32 · 08-31-2013, 04:36 PM

70stovebolt,

They are yours. I send you a PM as well.

djw32 · 08-31-2013, 04:47 PM

Keith,

Thanks for the help. I feel like I owe you a commission check. Although, that's probably not going to happen.

**70STOVEBOLT** · 09-03-2013, 12:46 PM

David, so $100 shipped?

Thanks,
Mark

djw32 · 09-04-2013, 12:29 AM

Yes, $100 shipped. Pm sent.
Posted via Mobile Device

**70STOVEBOLT** · 09-11-2013, 08:11 AM

David, I have to pass on these, I sent you a pm explaining why. I apologize to everyone involved in this thread, but a family crisis has come up that I must attend to.

Thanks,
Mark

19stepSide72 · 09-12-2013, 10:22 AM

A money order is on its way. Rob.
Posted via Mobile Device

djw32 · 09-13-2013, 09:11 AM

Thank you.
Posted via Mobile Device

19stepSide72 · 09-26-2013, 08:17 PM

Received. Thank you.
Posted via Mobile Device

08-30-2013, 06:43 PM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Cpp stock height disk brake spindle 1970 Hello, These are from my 1970 C-10. Cpp stock height disk brake spindle. $100 for the set. I will ship these. sold. Attached Images Last edited by djw32; 08-31-2013 at 04:37 PM.

08-31-2013, 09:06 AM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,213	Re: Cpp stock height disk brake spindle 1970 What ball joints and tie rod ends would need to be used with these? And is that $100 shipped? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

08-31-2013, 09:08 AM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Cpp stock height disk brake spindle 1970 IF these are 63-70 conversion stock height spindles,... they use 63-70 balljoints and outer tie rods. (which also means they will fit any 63-70 trucks) __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-31-2013, 09:10 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,213	Re: Cpp stock height disk brake spindle 1970 Is there an aftermarket spindle made for disc brakes that uses 63-70 parts? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

08-31-2013, 09:29 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,213	Re: Cpp stock height disk brake spindle 1970 Keith, I should have read your links in your sig before posting. I completely missed the Cpp in the title. Thanks for the excellent info. djw32 I will take these pending total shipped. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

08-31-2013, 11:54 AM	#7
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 I will jump in line just In case. Was going to buy these this weekend on cpp. Posted via Mobile Device

08-31-2013, 04:36 PM	#8
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 70stovebolt, They are yours. I send you a PM as well. Last edited by djw32; 08-31-2013 at 04:46 PM.

08-31-2013, 04:47 PM	#9
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Keith, Thanks for the help. I feel like I owe you a commission check. Although, that's probably not going to happen.

09-03-2013, 12:46 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,213	Re: Cpp stock height disk brake spindle 1970 David, so $100 shipped? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

09-04-2013, 12:29 AM	#11
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Yes, $100 shipped. Pm sent. Posted via Mobile Device

09-11-2013, 08:11 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,213	Re: Cpp stock height disk brake spindle 1970 David, I have to pass on these, I sent you a pm explaining why. I apologize to everyone involved in this thread, but a family crisis has come up that I must attend to. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

09-12-2013, 10:22 AM	#13
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 A money order is on its way. Rob. Posted via Mobile Device

09-13-2013, 09:11 AM	#14
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Cpp stock height disk brake spindle 1970 Thank you. Posted via Mobile Device

09-26-2013, 08:17 PM	#15
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Cpp stock height disk brake spindle 1970 Received. Thank you. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.