D52 Caliper Rear Disc Brake Brackets

[Captainfab]

I make all of my products everyday. However I am currently out of the parts for the D52 brackets. I will have more parts in about a week. Let me know and I'll make sure you get a set from the next ruin of parts.

Originally Posted by Beetle

Captain, you still make these?

[riz]

First off.... nice stuff !

What is the correct part number for the Wilwood calipers? I see 120-10938 and 120-10936, the only difference I see is the bore area??? Is it the same difference between the OEM D52 calipers JD5 and JB5 ?

Also, what are the part numbers for the brake pads that go in them? If I buy a complete stainless brake line set up for disc brakes will everything connect right up with no issues?

I'm trying to put some pricing together, thanks.

RIZ

[Captainfab]

Which calipers depends on what you are running on the front. If you are going with the Wilwood dual piston D52 all around, you will want the 120-10936's with the 2.0" bores on the front and the 120-10938's with the 1.125" bores on the back. You typically want smaller pistons on the back.

[riz]

I will be running a McGaugheys drop spindle up front, can I use Wilwood calipers on it?

RIZ

[Captainfab]

That I do not know. That would be a question to ask McGaughey's.

Originally Posted by riz

I will be running a McGaugheys drop spindle up front, can I use Wilwood calipers on it?

RIZ

[riz]

To answer my own question.... Wilwood says their D52 calipers will bolt right up to the McGaughys drop spindles from kit 93151 - 4.5 / 6 lowering kit.

RIZ

[riz]

Originally Posted by Captainfab

I make all of my products everyday. However I am currently out of the parts for the D52 brackets. I will have more parts in about a week. Let me know and I'll make sure you get a set from the next ruin of parts.

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

[riz]

Originally Posted by riz

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

I mean 232 + 13.60 + 28 for powder coated black = 273.60 😀
Posted via Mobile Device

[Captainfab]

No I do not have a powder coated set of D52 brackets. I do not have a set in bare steel yet. I am still waiting on some spacers to be cut. I was expecting them today, but they were not with the order I picked up this morning. Hopefully Monday or Tuesday. Then the powder coating will take a week to have done. When ever I have had a set powder coated in advance, they just sit here for a couple months.

Originally Posted by riz

Do you have a set powder coated in black ready to ship? $232 + 13.60 is what you said on page one... once you have them, I'm ready to buy.... just let me know. Thanks.

RIZ
Posted via Mobile Device

Originally Posted by riz

I mean 232 + 13.60 + 28 for powder coated black = 273.60 😀
Posted via Mobile Device

[riz]

Please let me know when the powder coated set is done and I will immediately make an order......... or can I order in advance? I can send payment today or tomorrow. Just let me know.

RIZ

[Captainfab]

I will send you a PM with ordering and payment info.

Originally Posted by riz

Please let me know when the powder coated set is done and I will immediately make an order......... or can I order in advance? I can send payment today or tomorrow. Just let me know.

RIZ