1972 c10 om 2001 tahoe 4x4 chassis - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

freemoto_xxx · 11-29-2015, 08:57 AM

Quote:

Originally Posted by swamp rat

Per that body mount nut, if that idea doesn't pan out I see a hole on the bottom of the frame that could be hogged open a bit and reinforced if necessary, you could possibly weld it thru the bottom or just use a socket and extension?

That's not a bad idea

freemoto_xxx · 11-29-2015, 05:14 PM

Ok the cab is back on for the final time. Now just test fitting the rest of the body then time to make it run

57taskforce · 11-29-2015, 07:06 PM

Are you posting this all real time?? I.e. As its happening? If so this is pretty incredible that you've got it to this point in only a week or two. Looks like your doing excellent work. I've done a K/5 frame swap on my 3100 so I know first hand the amount of work this takes. Looks like your doing a great job!

freemoto_xxx · 11-29-2015, 08:58 PM

Quote:

Originally Posted by 57taskforce

Are you posting this all real time?? I.e. As its happening? If so this is pretty incredible that you've got it to this point in only a week or two. Looks like your doing excellent work. I've done a K/5 frame swap on my 3100 so I know first hand the amount of work this takes. Looks like your doing a great job!

The post where I cut up the tahoe was a week prior but everything else is real time. And thank you

freemoto_xxx · 12-04-2015, 11:09 PM

i built the new steering shaft and installed the 2008 trailblazer ss brake booster and master cylinder

MARKDTN · 01-13-2016, 08:26 AM

Any updates on this? I was enjoying this one.

NurseBen · 01-14-2016, 01:10 AM

Yes, more please! I'm doing a similar swap but with a 2011 GMC Savana AWD van. I'm only using the chassis/running gear but have some questions for you. Looks like the track width of the van and Tahoe are fairly close, I believe the van is a few inches wider, have you run into any issues with wheels protruding from the fenders? Looks like your keeping the stock height, mine will be as low as possible so I'm anticipating fitment issues. Why did you redo your gas lines? I'm enjoying your build, keep the updates coming.
Ben

NurseBen · 01-14-2016, 01:12 AM

Oh and what did you use for the steering shaft. Thank you

junkcarguy · 01-14-2016, 05:20 AM

Subscribed I'd like to do one with a awd escalade

SaltyC20 · 01-14-2016, 12:26 PM

This looks awesome. Does anyone have links to other body swap build threads like this?

freemoto_xxx · 02-07-2016, 03:44 PM

ok getting back on track. i had to work for a couple months now i have about a week of down time. i need to re do the brakes then mount the rest of the sheet metal. after that it will be time to test drive

freemoto_xxx · 02-07-2016, 03:46 PM

new carpet also came in

freemoto_xxx · 02-07-2016, 03:47 PM

Quote:

Originally Posted by NurseBen

Oh and what did you use for the steering shaft. Thank you

i used a mix of the 72 chevy and the tahoe steering parts to make the shaft

freemoto_xxx · 02-07-2016, 03:49 PM

Quote:

Originally Posted by NurseBen

Yes, more please! I'm doing a similar swap but with a 2011 GMC Savana AWD van. I'm only using the chassis/running gear but have some questions for you. Looks like the track width of the van and Tahoe are fairly close, I believe the van is a few inches wider, have you run into any issues with wheels protruding from the fenders? Looks like your keeping the stock height, mine will be as low as possible so I'm anticipating fitment issues. Why did you redo your gas lines? I'm enjoying your build, keep the updates coming.
Ben

my truck will be lowered. it doesnt look like im going to have an issue with tire rub

NastyBuzzard · 03-07-2016, 04:20 PM

You are doing an awesome job. Do you still have the crew cab short bed with the 6.5 TD?

kehstr · 03-07-2016, 05:41 PM

subscribed

Ed F · 03-07-2016, 06:29 PM

Subscribed

sleepertruck72 · 03-07-2016, 09:30 PM

You sir are doing some nice work !

freemoto_xxx · 03-15-2016, 06:22 PM

Rebuilding the front end. I want it to drive like new

freemoto_xxx · 03-15-2016, 07:19 PM

Quote:

Originally Posted by NastyBuzzard

You are doing an awesome job. Do you still have the crew cab short bed with the 6.5 TD?

Yes I do and I'm thinking about selling it

NastyBuzzard · 03-16-2016, 06:50 AM

Quote:

Originally Posted by freemoto_xxx

Yes I do and I'm thinking about selling it

Can you give me some info on it or pictures? I am currently building a 88 crew cab short bed that I converter to 4x4 and I have a 6.5TD/NV4500 for it. I haven't seen or couldn't really find anyone who has done a build thread on it.

treveiger · 03-16-2016, 11:33 AM

Looks great so far.

**AMERICAN PICK-UP** · 03-16-2016, 12:48 PM

looking GOOD sir...

Custom/20 · 03-16-2016, 12:54 PM

Great job so far man, looking forward to seeing it on the road!

**dutchmanz** · 03-16-2016, 09:47 PM

Quote:

Originally Posted by freemoto_xxx

Yes I do and I'm thinking about selling it

Crew cab shortbed with a 6.5? I'm intrigued, especially one that's for sale. Tell us more!

11-29-2015, 05:14 PM	#77
freemoto_xxx Registered User Join Date: Feb 2006 Location: alaska Posts: 116	Re: 1972 c10 om 2001 tahoe 4x4 chassis Ok the cab is back on for the final time. Now just test fitting the rest of the body then time to make it run Attached Images

11-29-2015, 07:06 PM	#78
57taskforce All about them K’s Join Date: Jun 2014 Location: Farmington, New Mexico Posts: 6,229	Re: 1972 c10 om 2001 tahoe 4x4 chassis Are you posting this all real time?? I.e. As its happening? If so this is pretty incredible that you've got it to this point in only a week or two. Looks like your doing excellent work. I've done a K/5 frame swap on my 3100 so I know first hand the amount of work this takes. Looks like your doing a great job! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0

12-04-2015, 11:09 PM	#80
freemoto_xxx Registered User Join Date: Feb 2006 Location: alaska Posts: 116	Re: 1972 c10 om 2001 tahoe 4x4 chassis i built the new steering shaft and installed the 2008 trailblazer ss brake booster and master cylinder Attached Images

01-13-2016, 08:26 AM	#81
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,131	Re: 1972 c10 om 2001 tahoe 4x4 chassis Any updates on this? I was enjoying this one. __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

01-14-2016, 01:10 AM	#82
NurseBen Registered User Join Date: Aug 2013 Location: Bountiful, Utah Posts: 238	Re: 1972 c10 om 2001 tahoe 4x4 chassis Yes, more please! I'm doing a similar swap but with a 2011 GMC Savana AWD van. I'm only using the chassis/running gear but have some questions for you. Looks like the track width of the van and Tahoe are fairly close, I believe the van is a few inches wider, have you run into any issues with wheels protruding from the fenders? Looks like your keeping the stock height, mine will be as low as possible so I'm anticipating fitment issues. Why did you redo your gas lines? I'm enjoying your build, keep the updates coming. Ben

01-14-2016, 01:12 AM	#83
NurseBen Registered User Join Date: Aug 2013 Location: Bountiful, Utah Posts: 238	Re: 1972 c10 om 2001 tahoe 4x4 chassis Oh and what did you use for the steering shaft. Thank you

01-14-2016, 05:20 AM	#84
junkcarguy Registered User Join Date: Sep 2011 Location: colorado springs colorado Posts: 49	Re: 1972 c10 om 2001 tahoe 4x4 chassis Subscribed I'd like to do one with a awd escalade

01-14-2016, 12:26 PM	#85
SaltyC20 Registered User Join Date: Nov 2014 Location: Chandler, Arizona Posts: 47	Re: 1972 c10 om 2001 tahoe 4x4 chassis This looks awesome. Does anyone have links to other body swap build threads like this? __________________ 1968 Chevy C20

02-07-2016, 03:44 PM	#86
freemoto_xxx Registered User Join Date: Feb 2006 Location: alaska Posts: 116	Re: 1972 c10 om 2001 tahoe 4x4 chassis ok getting back on track. i had to work for a couple months now i have about a week of down time. i need to re do the brakes then mount the rest of the sheet metal. after that it will be time to test drive Attached Images

02-07-2016, 03:46 PM	#87
freemoto_xxx Registered User Join Date: Feb 2006 Location: alaska Posts: 116	Re: 1972 c10 om 2001 tahoe 4x4 chassis new carpet also came in Attached Images

03-07-2016, 04:20 PM	#90
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,274	Re: 1972 c10 om 2001 tahoe 4x4 chassis You are doing an awesome job. Do you still have the crew cab short bed with the 6.5 TD? __________________ 1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF 2020 1500 Silverado 3.0 Babymax 2002 2500 Silverado- 6.6/ Allison 2010 CTS V- The "NastyBuzzard" 1979 Trans Am - Eventually getting 6.0/T56 swap with boost

03-07-2016, 05:41 PM	#91
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 748	Re: 1972 c10 om 2001 tahoe 4x4 chassis subscribed

03-07-2016, 06:29 PM	#92
Ed F Registered User Join Date: Dec 2015 Location: Holland Mi. Posts: 302	Re: 1972 c10 om 2001 tahoe 4x4 chassis Subscribed

03-07-2016, 09:30 PM	#93
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 1972 c10 om 2001 tahoe 4x4 chassis You sir are doing some nice work ! __________________ 72 C20 Longbed 05 1500 Z71

03-15-2016, 06:22 PM	#94
freemoto_xxx Registered User Join Date: Feb 2006 Location: alaska Posts: 116	Re: 1972 c10 om 2001 tahoe 4x4 chassis Rebuilding the front end. I want it to drive like new Attached Images



Register or Log In To remove these advertisements.

03-16-2016, 11:33 AM	#97
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,090	Re: 1972 c10 om 2001 tahoe 4x4 chassis Looks great so far. __________________ 1969 Chevy c20(Miss Hackjob)

03-16-2016, 12:48 PM	#98
AMERICAN PICK-UP Senior Member Join Date: Jul 2012 Location: paragould,arkansas Posts: 855	Re: 1972 c10 om 2001 tahoe 4x4 chassis looking GOOD sir...

03-16-2016, 12:54 PM	#99
Custom/20 Registered User Join Date: Mar 2016 Location: Puyallup, WA Posts: 235	Re: 1972 c10 om 2001 tahoe 4x4 chassis Great job so far man, looking forward to seeing it on the road!

Register or Log In To remove these advertisements.