66 k20 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jdl71** · 06-08-2019, 11:04 AM

More

**aotte1** · 06-08-2019, 04:52 PM

Looking good, just catching up on your build.

One suggestion from updating reading. Would try to keep original cab corners if repairable or leave as is. Say this because reproductions are poor quality as to representing original shape. Shape no ware close to original.

Cab corner option for me 1). Fix yours; 2).find originals that are fixable; and 3).
Leave yours as is until you find originals that are fixable. 3M panel adhesive makes fixing them a lot easier , no welding needed. If needed would look out west for one that have a few rust holes but can be repaired.

Les

**jdl71** · 06-08-2019, 06:01 PM

Thanks Les, I was actually thinking about using the panel bond. The bottom of mine are completely gone so I’ve got to do something. I’ve got another cab here that are better but still have holes in the bottom. I might try to find a rust free set as you suggested.

raylube · 06-09-2019, 10:36 AM

Looking good. Is the springs the reason for the offset in bed height?. where did you get the springs, bushings and shackles?

**jdl71** · 06-09-2019, 12:10 PM

It’s a lot better but still not right. I had one 8 leaf and one 7 leaf before. I can at least rule that out now. I was going to pull the right rear shock off to see if it was stuck and pushing things up and noticed the mount on the axle is bent and twisted. I seriously don’t know what you have to hit to that, it’s like 1/4in plate steel.

The springs and u bolts came from General spring in KC MO. Everything else from LMC, the only place I found that had it all. I didn’t buy any bushings, they were included in the springs and shackles. I bought new u bolts, pins and lock bolts.

shortstep60 · 06-09-2019, 04:05 PM

Your truck is looking good it takes a lot of time and money. Its getting hard to find any 60-66 4wd trucks. Last month I bought a 1960 GMC k20 4wd don't no what going to do with it yet. I have three frame offs in my shop that I need to get done.

**jdl71** · 06-09-2019, 05:16 PM

Time, money and patience, none of which I have in abundance. It’s a sickness I tell ya, I try to focus just on this then I see something else I’ve just gotta have. So far I’ve resisted another project but I’m getting weak.

shortstep60 · 06-09-2019, 08:44 PM

Try having three in your shop. I have a 1960 short bed a 64 short bed and a 65 long bed and they all have bbw. Yes its a sickness but for the most part we enjoy working on are trucks.

**jdl71** · 06-15-2019, 07:27 PM

Found this camper on marketplace. Been wanting one for a while that is somewhat period. Tag says 74 or 79, close enough. Like the truck when I found it, the camper is rough but worth saving

raylube · 06-16-2019, 12:41 AM

Awesome. Maybe that will level your bed. Ha ha

**jdl71** · 06-16-2019, 10:24 AM

Quote:

Originally Posted by raylube

Awesome. Maybe that will level your bed. Ha ha

If we all sit on the right side while we're in it.

**jocko** · 06-16-2019, 06:04 PM

Fliteways are great little campers! I almost bought one recently too - still wish I had. Nice!

**jdl71** · 06-16-2019, 09:10 PM

Quote:

Originally Posted by jocko

Fliteways are great little campers! I almost bought one recently too - still wish I had. Nice!

I’d never heard of them before this. Tag says it was made in Wisconsin.

straight6chevyguy · 06-17-2019, 02:04 PM

Looks really good.

**jdl71** · 07-28-2019, 05:10 PM

Body and paint, body and paint, body and paint....

**jdl71** · 07-28-2019, 05:13 PM

Body and paint

**jdl71** · 07-28-2019, 05:16 PM

And more

**jdl71** · 07-28-2019, 05:18 PM

More

**jdl71** · 07-28-2019, 05:22 PM

I should have pulled the dents out of the hood first but was waiting to buy a stud welder and slide hammer. After my experiment on the door with screws and a pry bar I don’t think I need one. I ran out of paint on the hood also so I’m going to have to respray it anyway. I’ll take care of the dents then. I also want to get some real body filler. Saturday afternoon bondo was my only option and I was in a groove this past couple weeks and wanted to keep going. Some of my methods aren’t body shop perfect nor is the quality but I’m very happy with it considering I’m learning as I go.

**cwcarpenter98** · 07-28-2019, 08:48 PM

The progress is looking great! I love that camper sitting in the bed

straight6chevyguy · 07-28-2019, 10:00 PM

That's looking really good!

**jdl71** · 07-29-2019, 09:14 PM

Couple more from tonight

350TacoZilla · 07-29-2019, 09:39 PM

Man don't take this the wrong way but I almost wish you wouldn't have started painting it lol, I love the job you are doing on the respray but man that thing looked good with the patina.

**jdl71** · 07-30-2019, 02:06 PM

Quote:

Originally Posted by 350TacoZilla

Man don't take this the wrong way but I almost wish you wouldn't have started painting it lol, I love the job you are doing on the respray but man that thing looked good with the patina.

If it didn’t need so much rust repair and the bed was all the same color I might have left it alone. It really looked worse in person and all my life I’ve never had a decent looking old truck. I’m ready for one. 😁

**jdl71** · 08-01-2019, 08:41 PM

Got more paint tonight

06-08-2019, 11:04 AM	#176
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 More Attached Images __________________ Psalm 23 64 C10 66 K20

06-08-2019, 04:52 PM	#177
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 66 k20 Looking good, just catching up on your build. One suggestion from updating reading. Would try to keep original cab corners if repairable or leave as is. Say this because reproductions are poor quality as to representing original shape. Shape no ware close to original. Cab corner option for me 1). Fix yours; 2).find originals that are fixable; and 3). Leave yours as is until you find originals that are fixable. 3M panel adhesive makes fixing them a lot easier , no welding needed. If needed would look out west for one that have a few rust holes but can be repaired. Les

06-08-2019, 06:01 PM	#178
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Thanks Les, I was actually thinking about using the panel bond. The bottom of mine are completely gone so I’ve got to do something. I’ve got another cab here that are better but still have holes in the bottom. I might try to find a rust free set as you suggested. __________________ Psalm 23 64 C10 66 K20

06-09-2019, 10:36 AM	#179
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 276	Re: 66 k20 Looking good. Is the springs the reason for the offset in bed height?. where did you get the springs, bushings and shackles?

06-09-2019, 12:10 PM	#180
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 It’s a lot better but still not right. I had one 8 leaf and one 7 leaf before. I can at least rule that out now. I was going to pull the right rear shock off to see if it was stuck and pushing things up and noticed the mount on the axle is bent and twisted. I seriously don’t know what you have to hit to that, it’s like 1/4in plate steel. The springs and u bolts came from General spring in KC MO. Everything else from LMC, the only place I found that had it all. I didn’t buy any bushings, they were included in the springs and shackles. I bought new u bolts, pins and lock bolts. __________________ Psalm 23 64 C10 66 K20

06-09-2019, 04:05 PM	#181
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: 66 k20 Your truck is looking good it takes a lot of time and money. Its getting hard to find any 60-66 4wd trucks. Last month I bought a 1960 GMC k20 4wd don't no what going to do with it yet. I have three frame offs in my shop that I need to get done.

06-09-2019, 05:16 PM	#182
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Time, money and patience, none of which I have in abundance. It’s a sickness I tell ya, I try to focus just on this then I see something else I’ve just gotta have. So far I’ve resisted another project but I’m getting weak. __________________ Psalm 23 64 C10 66 K20

06-09-2019, 08:44 PM	#183
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: 66 k20 Try having three in your shop. I have a 1960 short bed a 64 short bed and a 65 long bed and they all have bbw. Yes its a sickness but for the most part we enjoy working on are trucks.

06-15-2019, 07:27 PM	#184
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Found this camper on marketplace. Been wanting one for a while that is somewhat period. Tag says 74 or 79, close enough. Like the truck when I found it, the camper is rough but worth saving Attached Images __________________ Psalm 23 64 C10 66 K20 Last edited by jdl71; 06-16-2019 at 10:24 AM.

06-16-2019, 12:41 AM	#185
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 276	Re: 66 k20 Awesome. Maybe that will level your bed. Ha ha

06-16-2019, 06:04 PM	#187
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,933	Re: 66 k20 Fliteways are great little campers! I almost bought one recently too - still wish I had. Nice!

06-17-2019, 02:04 PM	#189
straight6chevyguy Registered User Join Date: Dec 2018 Location: yamhill OR Posts: 785	Re: 66 k20 Looks really good. __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1998 chevy c1500 4.3L 5speed (My current driver) 2002 Chevy s10 4.3L auto 4x4 1971 mercury monterey wagon 400 auto To many projects!

07-28-2019, 05:10 PM	#190
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Body and paint, body and paint, body and paint.... Attached Images __________________ Psalm 23 64 C10 66 K20

07-28-2019, 05:13 PM	#191
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Body and paint Attached Images __________________ Psalm 23 64 C10 66 K20

07-28-2019, 05:16 PM	#192
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 And more Attached Images __________________ Psalm 23 64 C10 66 K20



Register or Log In To remove these advertisements.

07-28-2019, 05:18 PM	#193
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 More Attached Images __________________ Psalm 23 64 C10 66 K20

07-28-2019, 05:22 PM	#194
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 I should have pulled the dents out of the hood first but was waiting to buy a stud welder and slide hammer. After my experiment on the door with screws and a pry bar I don’t think I need one. I ran out of paint on the hood also so I’m going to have to respray it anyway. I’ll take care of the dents then. I also want to get some real body filler. Saturday afternoon bondo was my only option and I was in a groove this past couple weeks and wanted to keep going. Some of my methods aren’t body shop perfect nor is the quality but I’m very happy with it considering I’m learning as I go. __________________ Psalm 23 64 C10 66 K20

07-28-2019, 08:48 PM	#195
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 66 k20 The progress is looking great! I love that camper sitting in the bed __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-28-2019, 10:00 PM	#196
straight6chevyguy Registered User Join Date: Dec 2018 Location: yamhill OR Posts: 785	Re: 66 k20 That's looking really good! __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1998 chevy c1500 4.3L 5speed (My current driver) 2002 Chevy s10 4.3L auto 4x4 1971 mercury monterey wagon 400 auto To many projects!

07-29-2019, 09:14 PM	#197
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Couple more from tonight Attached Images __________________ Psalm 23 64 C10 66 K20

07-29-2019, 09:39 PM	#198
350TacoZilla Registered User Join Date: Sep 2010 Location: Hancock Md Posts: 386	Re: 66 k20 Man don't take this the wrong way but I almost wish you wouldn't have started painting it lol, I love the job you are doing on the respray but man that thing looked good with the patina.

08-01-2019, 08:41 PM	#200
jdl71 Senior Member Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 66 k20 Got more paint tonight Attached Images __________________ Psalm 23 64 C10 66 K20

Register or Log In To remove these advertisements.