1967 seat pic for vectorit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 02-06-2011, 04:33 PM

I think this may be the style you are looking for. This is in a 67 i am parting. The bad news, after i took the cheesy cover off, i think this is too nice to cut up. Here is a couple of pics anyhow. I think i better save this seat. Sorry i couldn't help. Eric

vectorit · 02-06-2011, 05:06 PM

yep, that's a version I am looking for.

That there folks, is a TRUE OEM 67/68 seat cover design.

If you decide to recover the seat, ask the upholsterer to remove the seat/back covers in one piece. Then PM me!

BTW: The color of that material is exactly what my burb came with.

**too much stuff** · 02-06-2011, 05:13 PM

I will keep you in mind. I also have a plain jane 68 gmc that i will part this spring when the snow leaves, but i can't remember what seat was in it.

67chevy1series · 02-06-2011, 05:18 PM

if i still had my bench i would have done it with a red and black in that exact style!

vectorit · 02-06-2011, 05:29 PM

Quote:

Originally Posted by 67chevy1series

if i still had my bench i would have done it with a red and black in that exact style!

That combo would look suhweet!

The material used for the 67/68 is really nice, so nice it's very expensive to buy.
Personally I think 68 was the last year Chevrolet offered such a nice material for the seats. Hence, why reproduction seat covers with it is not reproduced. (at least I haven't found a vendor selling them).

The pics above do not do the material justice, since they are over 40 years old and dirty.

67chevy1series · 02-06-2011, 05:33 PM

i like 67 68 seats better than the later models....

Classic Bowties · 02-06-2011, 06:10 PM

Quote:

Originally Posted by 67chevy1series

i like 67 68 seats and options better than the later models....

**too much stuff** · 02-07-2011, 01:02 AM

So what would be the best to clean this? All i did was run the air hose across it...

**oldgold70c10** · 02-07-2011, 01:18 AM

Quote:

Originally Posted by Classic Bowties

Anyway, that is a really neat looking seat pattern. Does anyone know what the fabric pattern is, or if it was used by any other GM divisions?

67chevy1series · 02-07-2011, 01:20 AM

Quote:

Originally Posted by Classic Bowties

am i missing somthin ?

Quote:

Originally Posted by oldgold70c10

ya me to

Beat68CST · 02-07-2011, 04:49 AM

My 68 with buckets has like a marble brown, that's like 2-3 different tones, it's pretty wild lookin...

Since it's all ripped up, I'm think a nice Houndstooth kinda setup.

02-06-2011, 04:33 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,705	1967 seat pic for vectorit I think this may be the style you are looking for. This is in a 67 i am parting. The bad news, after i took the cheesy cover off, i think this is too nice to cut up. Here is a couple of pics anyhow. I think i better save this seat. Sorry i couldn't help. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-06-2011, 05:06 PM	#2
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 1967 seat pic for vectorit yep, that's a version I am looking for. That there folks, is a TRUE OEM 67/68 seat cover design. If you decide to recover the seat, ask the upholsterer to remove the seat/back covers in one piece. Then PM me! BTW: The color of that material is exactly what my burb came with. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU Last edited by vectorit; 02-06-2011 at 05:09 PM.

02-06-2011, 05:13 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,705	Re: 1967 seat pic for vectorit I will keep you in mind. I also have a plain jane 68 gmc that i will part this spring when the snow leaves, but i can't remember what seat was in it. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-06-2011, 05:18 PM	#4
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 seat pic for vectorit if i still had my bench i would have done it with a red and black in that exact style!

02-06-2011, 05:33 PM	#6
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 seat pic for vectorit i like 67 68 seats better than the later models.... Last edited by 67chevy1series; 02-07-2011 at 01:21 AM.

02-07-2011, 01:02 AM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,705	Re: 1967 seat pic for vectorit So what would be the best to clean this? All i did was run the air hose across it... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-07-2011, 04:49 AM	#11
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: 1967 seat pic for vectorit My 68 with buckets has like a marble brown, that's like 2-3 different tones, it's pretty wild lookin... Since it's all ripped up, I'm think a nice Houndstooth kinda setup.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.