''Project '64 SYT Super Yenko Truck"

[Strodder]

Originally Posted by jgh64pkup

i hate edelbrocks i had one on there before and i hated it so i put the holley on it was running perfect until i started messing with it then this happened
i got a line on a 625 demon so im trying to gather up some money
BTW it an edelbrock performer rpm
thanks jason

Same manifold I'm using. That Demon carb should be good.

[jgh64pkup]

cool im fixing to do a water pump job on a mazda millenium
he said he took it to the dealer and said it would cost him 4000 dollars to put a water pump and a belt on it
im going to charge him 200
so theres my carb money
i also have a line on a qft q series 850 carb for 250
if my neighbor doesnt buy it i will

[Strodder]

Originally Posted by jgh64pkup

cool im fixing to do a water pump job on a mazda mirrage or something
he said he took it to the dealer and said it would cost him 4000 dollars to put a water pump and a belt on it
im going to charge him 200

Have you done one before? Be careful. You can get burned. Find out how many hours it's supposed to pay. Then set how much you want to charge per hour. Dealers around here charge $100 plus. I charge $40, and that's cheap.

[ruffrida2005]

Just let me know if you want my carb, I'll have my wife bring it from my parents. Doesn't matter either way!

[jgh64pkup]

it all depends on if my neighbor backs out on the other carb and when he does it if he doesnt do it in the next week ill probably buy yours

[jgh64pkup]

Originally Posted by Strodder

Have you done one before? Be careful. You can get burned. Find out how many hours it's supposed to pay. Then set how much you want to charge per hour. Dealers around here charge $100 plus. I charge $40, and that's cheap.

it says an hour to an hour and a half

[ruffrida2005]

Just wondering how much HP you think you'll be making? You dont think a 850 will flood it? I just cant remember what all you did to your motor.

[dammitmitchell]

have yoru jackstands ready..
mazdas are fords....
and they'll have the waterpump more easily acessible from the bottom ... (usually)
p.s. if you cant do it.. bring it over and i'll do it with you...

[jgh64pkup]

Originally Posted by ruffrida2005

Just wondering how much HP you think you'll be making? You dont think a 850 will flood it? I just cant remember what all you did to your motor.

360-370. i was just going to run it until i build my 6.0

[ruffrida2005]

I think a 850 will flood your motor, I'm pushing just a little more HP then you. I wouldn't run over a 750 really. Might ask someone that knows a lot more then me.

[Captainfab]

IMO that's going to be way too much carb for your 360 small block. You'll have to do a lot of tuning to get it to run right, and even then it probably won't run as good if you were to run say a 650-700cfm carb. A 750 would be pushing it. Just my .02

Originally Posted by jgh64pkup

cool im fixing to do a water pump job on a mazda millenium
he said he took it to the dealer and said it would cost him 4000 dollars to put a water pump and a belt on it
im going to charge him 200
so theres my carb money
i also have a line on a qft q series 850 carb for 250
if my neighbor doesnt buy it i will

[highperf4x4]

850 will definitely be too much without vacum secondaries.

[jgh64pkup]

alright ruffrida im buying your carb
i didnt get the mazda job so im going with a 625 demon

[ruffrida2005]

Just let me know when you get your stuff together Gage. I'll get it sent to ya!

[jgh64pkup]

alright ill let you know hopefully i have a job tomorrow
i found out that a holley power valve will work in a demon

[ruffrida2005]

Ok cool, do you have any Jets? I dont know what size are in this, my buddy said he put the larges jets he could in here. You might want to play with it a little maybe clean some stuff up. Does anyone know if a Holley 4160 rebuild kit will work with the Demon It's the same set up

[ruffrida2005]

If it needs to be rebuild I have a $20 summitbucks I'll give to ya.

[highperf4x4]

Originally Posted by ruffrida2005

If it needs to be rebuild I have a $20 summitbucks I'll give to ya.

man, I'm gonna start doing business with you !

[jgh64pkup]

Originally Posted by ruffrida2005

If it needs to be rebuild I have a $20 summitbucks I'll give to ya.

cool ive got some jets from my holley and a power valve
im not sure when ill have the money though ill let you know

[JRBECK64]

jgh64pkup,
Its great to hear a small block chevy rumble. I havent heard my 64, well my Sons 64 in almost 2 years and it has a 68 327 in it. Yours sounds great. I hope mine sounds as good as I remember it. The last time I remember driving it, I was Idleing out of a show and the heads were a turnin!!! I also hope that two years of setting hasn't done any harm to it. Well Time will only tell the story. Your truck is really coming together and I cant wait to see the finished product.
JRBECK64

[jgh64pkup]

thanks JRBECK64
do you have a build thread

[ruffrida2005]

Hightperf4x4 if you want to buy some stuff from me you can buy my truck for 6500, and I'll throw in a $10 summitbucks!

[highperf4x4]

Originally Posted by ruffrida2005

Hightperf4x4 if you want to buy some stuff from me you can buy my truck for 6500, and I'll throw in a $10 summitbucks!

dude............... you just upped the product and downed the summit bucks................ what gives? I kick your dog or somethin????

[dammitmitchell]

AARP DISCOUNT added to your shopping cart during checkout..
sorry perf couldnt resist

[JRBECK64]

Originally Posted by jgh64pkup

thanks JRBECK64
do you have a build thread

jgh64pkup,
Yes its called (My Sons 64 Shortwide). I just updated the pictures on the post.

JRBECK64