Company Trucks - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 10-19-2013, 04:24 PM

Amazing work. Cant wait to see these come together.

69CST-V · 10-21-2013, 01:17 AM

Quote:

Originally Posted by 1972SuperCheyenne

Amazing work. Cant wait to see these come together.

Thanks. Nates doing all the heavy lifting. LOL. Everything I have from Porterbuilt has been top notch. I just hope I can do his hard work justice when it comes time for my part.

69CST-V · 10-30-2013, 03:10 PM

All right as many of you know SEMA is fast approaching. Nate and the guys at Poterbuilt have been putting in the overtime and still managed to put some time in on the beaters. Looking good.

99 to Life · 10-30-2013, 08:02 PM

Luv it, how much is this racking you!!

Bierkan · 10-31-2013, 01:12 AM

Quote:

Originally Posted by 69CST-V

Ok since its my thread I will be high jacking it from time to time as I don't intend on doing a full blown Alternate Tinkering thread. Spent the last night drawing the first renderings of the Drift Trike. There has been tons of interest so I thought I would share my concept. I have a lot more but this will give you an idea of what I'm doing.

FYI, there is a frame on e-bay for $45 that might help with this project. It's just the main backbone, but it has the neck already built and the mounting pont for whatever rear axle sub-frame you wish to build.

Did you say if you were going to drive the rear wheels or front with the engine? I've considered doing the front wheel. I have a blueprinted, roller bearing, .030 over 5hp Briggs in my garage from my kart racing days. It's an old Uncle Frank's engine. During the last freshening, it dyno'd 10.5 horse at 6600 rpms. Top speed on the banked 1/8th mile I raced was just about 70 mph. It would be too much motor to drive the rear wheels - it would just spin the PVC tubes - and I think it might be too much for the front wheel, too. If it turned a 12" wheel to 70, think how fast it would turn a 20" wheel! I'd best be wearing full leathers and a full face helmet.

69CST-V · 10-31-2013, 08:22 AM

Quote:

Originally Posted by Bierkan

FYI, there is a frame on e-bay for $45 that might help with this project. It's just the main backbone, but it has the neck already built and the mounting pont for whatever rear axle sub-frame you wish to build.

Did you say if you were going to drive the rear wheels or front with the engine? I've considered doing the front wheel. I have a blueprinted, roller bearing, .030 over 5hp Briggs in my garage from my kart racing days. It's an old Uncle Frank's engine. During the last freshening, it dyno'd 10.5 horse at 6600 rpms. Top speed on the banked 1/8th mile I raced was just about 70 mph. It would be too much motor to drive the rear wheels - it would just spin the PVC tubes - and I think it might be too much for the front wheel, too. If it turned a 12" wheel to 70, think how fast it would turn a 20" wheel! I'd best be wearing full leathers and a full face helmet.

I'll be driving the rear. My goal is to not need the PVC as I like the smell of burnt rubber and black marks on the street. LOL. I've started looking at some billet pieces for the engine and I've seen some guys get these in the 20's for HP. As far as the frame I like building them. I just got power to my new shop to handle the welders and machine equipment so the frame is the fun part. The only thing I will buy for that is the front fork, stem, and bearing cup assy. To cheap to mess with building. As soon as I get back from traveling I should have some tubing bent up and the main chassis in a fixture so I can build a few more.

You need to get started on yours sounds like it would be innovative and just flat out bad a$$. Post a link in my thread if you start one so I can follow your lil project.

Thanks for check'n in.

69CST-V · 11-11-2013, 05:36 PM

Just a few new pictures from Poterbuilt.

**superflysteiny** · 11-11-2013, 06:22 PM

So nice I like it

69CST-V · 11-11-2013, 08:47 PM

Quote:

Originally Posted by superflysteiny

So nice I like it

Thanks man. Nate and his crew look to be putting some good thought into the package. Stoked to see both trucks come together.

On a side note, you seem to have rocked SEMA. Tootsie is all over the web. It's a really clean and masterful piece. You know how to build to the next level. Hope to see it in person someday soon. Congrats on the truck but more than that glad to hear about your mom.

**oldman3** · 11-12-2013, 12:19 AM

Very nice...Jim

STOCKISH · 11-12-2013, 11:28 AM

Can't wait to see this as a roller!

Wybrow · 11-12-2013, 12:52 PM

Both of these are going to be incredible.

69CST-V · 11-12-2013, 01:45 PM

Quote:

Originally Posted by 1972SuperCheyenne

Can't wait to see this as a roller!

Me either. I know it will be worth the wait.

Quote:

Originally Posted by Wybrow

Both of these are going to be incredible.

Thanks, I hope they turn out as nice as I can vision them in my head. LOL

99 to Life · 11-12-2013, 06:11 PM

yeah looking super proper. again, just love the frame table. wish I had room for one.

TheBlueBomber · 11-13-2013, 08:15 PM

Looks awesome. I love the bikes.

Mattyparty · 11-14-2013, 11:19 AM

Subscribes

69CST-V · 12-04-2013, 10:24 AM

Well sorry for not updating in a timely manner. However Nate and the guys at Porterbuilt have been working hard and sent over a few progress pictures. I'm starting to get excited now seeing how far along things are getting. Fully welded front clip with those beautiful Porterbuilt welds. Oh yea.

69CST-V · 12-04-2013, 10:46 AM

Oh I've also made a little progress on the Drift-Trike. Tell me what you think.

STOCKISH · 12-04-2013, 10:46 AM

So nice! This is going to be amazing.

**superflysteiny** · 12-04-2013, 12:11 PM

You guys are killing it

72BlckButy · 12-04-2013, 02:28 PM

Love it!

**oldman3** · 12-04-2013, 07:42 PM

Sweeeeeet...Jim

Angryman117 · 12-04-2013, 11:57 PM

The Drift-Trike looks like it will be pretty insane! Keep up the good work on the Trike N Trucks!

69CST-V · 12-17-2013, 02:05 PM

Little late on the update. The guys at Porterbuilt are making progress and have the first one off the table.

xpickup · 12-17-2013, 02:43 PM

69CST-V, I can not wait to see it with all the suspension hanging on it, and it being a roller. Very, very nice.

Shannon

10-19-2013, 04:24 PM	#151
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Company Trucks Amazing work. Cant wait to see these come together. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

10-30-2013, 03:10 PM	#153
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks All right as many of you know SEMA is fast approaching. Nate and the guys at Poterbuilt have been putting in the overtime and still managed to put some time in on the beaters. Looking good. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-30-2013, 08:02 PM	#154
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Company Trucks Luv it, how much is this racking you!! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

11-11-2013, 05:36 PM	#157
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Just a few new pictures from Poterbuilt. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

11-11-2013, 06:22 PM	#158
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Company Trucks So nice I like it __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-12-2013, 12:19 AM	#160
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: Company Trucks Very nice...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-12-2013, 11:28 AM	#161
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Company Trucks Can't wait to see this as a roller! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-12-2013, 12:52 PM	#162
Wybrow Registered User Join Date: Dec 2011 Location: Stratford, Ontario Posts: 97	Re: Company Trucks Both of these are going to be incredible.

11-12-2013, 06:11 PM	#164
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Company Trucks yeah looking super proper. again, just love the frame table. wish I had room for one. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

11-13-2013, 08:15 PM	#165
TheBlueBomber Registered User Join Date: Feb 2013 Location: Cary, NC Posts: 816	Re: Company Trucks Looks awesome. I love the bikes. __________________ Austin 1996 Chevrolet K1500 Silverado 1979 Chevrolet K10 Scottsdale - Carolina K10 - My 4.8L Twin turbo build - Project Short Stroke - Instagram - TheBlueBomber1996

11-14-2013, 11:19 AM	#166
Mattyparty Registered User Join Date: Nov 2012 Location: Wichita, ks Posts: 134	Re: Company Trucks Subscribes

12-04-2013, 10:24 AM	#167
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Well sorry for not updating in a timely manner. However Nate and the guys at Porterbuilt have been working hard and sent over a few progress pictures. I'm starting to get excited now seeing how far along things are getting. Fully welded front clip with those beautiful Porterbuilt welds. Oh yea. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

12-04-2013, 10:46 AM	#168
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Oh I've also made a little progress on the Drift-Trike. Tell me what you think. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

12-04-2013, 10:46 AM	#169
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Company Trucks So nice! This is going to be amazing. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-04-2013, 12:11 PM	#170
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Company Trucks You guys are killing it __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell



Register or Log In To remove these advertisements.

12-04-2013, 02:28 PM	#171
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Company Trucks Love it! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-04-2013, 07:42 PM	#172
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: Company Trucks Sweeeeeet...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-04-2013, 11:57 PM	#173
Angryman117 Registered User Join Date: Jul 2013 Location: VAFB, CA Posts: 227	Re: Company Trucks The Drift-Trike looks like it will be pretty insane! Keep up the good work on the Trike N Trucks! __________________ Angryman117's 47 Chevy Build 89 Silverado Z71 LS Swap (sold)

12-17-2013, 02:05 PM	#174
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Little late on the update. The guys at Porterbuilt are making progress and have the first one off the table. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

12-17-2013, 02:43 PM	#175
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: Company Trucks 69CST-V, I can not wait to see it with all the suspension hanging on it, and it being a roller. Very, very nice. Shannon __________________ 48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually

Register or Log In To remove these advertisements.