First Steps LS Swap...... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**truckdude239** · 07-07-2013, 06:39 AM

Just a fyi this is not a forsale post in the classifieds and any selling here will get the post locked
Posted via Mobile Device

lynnfield · 07-07-2013, 04:36 PM

Got it, thaaaaanks.

rawraw67 · 07-07-2013, 09:42 PM

Thanks Greg. check it out and let me know.

rawraw67 · 07-07-2013, 09:44 PM

sorry about the post.

lynnfield · 07-07-2013, 10:06 PM

I cannot sell parts from this thread, I've been warned.

lynnfield · 07-09-2013, 08:28 PM

I ordered a set of Trailblazer SS manifolds from fastmotorsports.net yesterday. For anyone else wanting to use these, they have a bunch of these manifolds $50 plus shipping for a pair. Mine were $79 to my door. I looked on a couple TBSS forums, but this was the best price I was able to find. Greg

solidaxel · 07-11-2013, 10:19 AM

Quote:

Originally Posted by lynnfield

I ordered a set of Trailblazer SS manifolds from fastmotorsports.net yesterday. For anyone else wanting to use these, they have a bunch of these manifolds $50 plus shipping for a pair. Mine were $79 to my door. I looked on a couple TBSS forums, but this was the best price I was able to find. Greg

Thanks Greg, I am on it!
Did they come with the heat shields?

solidaxel · 07-11-2013, 10:30 AM

Did not find any cast iron manifolds at fastmotorsports, what am I missing?

**oldman3** · 07-11-2013, 10:33 AM

Quote:

Originally Posted by solidaxel

Did not find any cast iron manifolds at fastmotorsports, what am I missing?

Same here....Jim

solidaxel · 07-11-2013, 10:51 AM

Found them, used parts!!!

solidaxel · 07-11-2013, 02:55 PM

Shipping to Arizona is a bit more, but they will be delivered to my doorstep by Tuesday !

The shipping weight was 35#!

Thanks for the tip.

lynnfield · 07-12-2013, 12:23 AM

Yes, its under used parts, I should have mentioned that. Here is the link:

http://www.fast-motorsports.net/Sear...s.asp?Cat=2861

SeTx67 · 07-12-2013, 12:32 AM

I'm a member on tbssowners. If any of you guys see a set for sale over there and need help I can get you in contact with the seller. Just shoot me a PM and I'll see what I can do
Posted via Mobile Device

solidaxel · 07-12-2013, 01:11 AM

Quote:

Originally Posted by SeTx67

I'm a member on tbssowners. If any of you guys see a set for sale over there and need help I can get you in contact with the seller. Just shoot me a PM and I'll see what I can do
Posted via Mobile Device

When I talked to Katie this morning I told her about this site and she said she has had a few orders for these used manifold. I mentioned this site and that was the reason for the run on TBSS manifolds

SeTx67 · 07-12-2013, 01:15 AM

Katie and Brandon at fast are good people
Posted via Mobile Device

**truckdude239** · 07-12-2013, 02:55 AM

Man eish i hax known about them i ordered mine new from yhe dealer was 130 buxs for 2 with the gm gaskets no heat shields
Posted via Mobile Device

SeTx67 · 07-13-2013, 10:51 AM

I may have stumbled across a set of tbss manifolds on tbssowners. He's asking $50 so I sent him a pm. I'll post a update if I get a response if anyone is interested
Posted via Mobile Device

lynnfield · 07-13-2013, 11:50 AM

Waiting on the details for the group buy from Boyd Welding to order my tank.....................Greg

lynnfield · 07-13-2013, 11:52 AM

That's funny, she must have been wondering WTH???

Quote:

Originally Posted by solidaxel

When I talked to Katie this morning I told her about this site and she said she has had a few orders for these used manifold. I mentioned this site and that was the reason for the run on TBSS manifolds

lynnfield · 07-13-2013, 11:53 AM

Starting on the disc brake conversion today

SeTx67 · 07-13-2013, 12:39 PM

Sorry for sidetracking your thread. I'll edit my post if you'd like. I'll be following along as I should be starting a ls swap soon
Posted via Mobile Device

lynnfield · 07-13-2013, 01:23 PM

Np, every little bit helps.

lynnfield · 07-14-2013, 09:14 PM

Sooo, there I am, under the truck working on the 5 lug disc conversion when I decide to take a look at how the tank is gonna fit.............and there it is..........

Riveted1 · 08-09-2013, 02:38 AM

Haha! That's a Texas truck! What did you expect?! (I'm from TX btw) Is it gone yet?

lynnfield · 10-15-2013, 08:03 PM

Been away for a while, work has been busy and both the kids are in sports. What can I say? As of right now I have the disc brake conversion done, rebuilt the posi unit in the rear end and removed the mess that was the trailer hitch. I still need to replace the rear crossmember, but I plan on doing that later. As soon as it stops raining, I am going to push the 70' out and put the 06' in and start pulling the engine from the donor.

07-07-2013, 06:39 AM	#26
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: First Steps LS Swap...... Just a fyi this is not a forsale post in the classifieds and any selling here will get the post locked Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

07-07-2013, 04:36 PM	#27
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Got it, thaaaaanks. Last edited by lynnfield; 07-07-2013 at 04:42 PM.

07-07-2013, 09:42 PM	#28
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: First Steps LS Swap...... Thanks Greg. check it out and let me know.

07-07-2013, 09:44 PM	#29
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: First Steps LS Swap...... sorry about the post.

07-07-2013, 10:06 PM	#30
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... I cannot sell parts from this thread, I've been warned.

07-09-2013, 08:28 PM	#31
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... I ordered a set of Trailblazer SS manifolds from fastmotorsports.net yesterday. For anyone else wanting to use these, they have a bunch of these manifolds $50 plus shipping for a pair. Mine were $79 to my door. I looked on a couple TBSS forums, but this was the best price I was able to find. Greg

07-11-2013, 10:30 AM	#33
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: First Steps LS Swap...... Did not find any cast iron manifolds at fastmotorsports, what am I missing? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

07-11-2013, 10:51 AM	#35
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: First Steps LS Swap...... Found them, used parts!!! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

07-11-2013, 02:55 PM	#36
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: First Steps LS Swap...... Shipping to Arizona is a bit more, but they will be delivered to my doorstep by Tuesday ! The shipping weight was 35#! Thanks for the tip. __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

07-12-2013, 12:23 AM	#37
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Yes, its under used parts, I should have mentioned that. Here is the link: http://www.fast-motorsports.net/Sear...s.asp?Cat=2861

07-12-2013, 12:32 AM	#38
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: First Steps LS Swap...... I'm a member on tbssowners. If any of you guys see a set for sale over there and need help I can get you in contact with the seller. Just shoot me a PM and I'll see what I can do Posted via Mobile Device

07-12-2013, 01:15 AM	#40
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: First Steps LS Swap...... Katie and Brandon at fast are good people Posted via Mobile Device

07-12-2013, 02:55 AM	#41
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: First Steps LS Swap...... Man eish i hax known about them i ordered mine new from yhe dealer was 130 buxs for 2 with the gm gaskets no heat shields Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

07-13-2013, 10:51 AM	#42
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: First Steps LS Swap...... I may have stumbled across a set of tbss manifolds on tbssowners. He's asking $50 so I sent him a pm. I'll post a update if I get a response if anyone is interested Posted via Mobile Device

07-13-2013, 11:50 AM	#43
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Waiting on the details for the group buy from Boyd Welding to order my tank.....................Greg



Register or Log In To remove these advertisements.

07-13-2013, 11:53 AM	#45
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Starting on the disc brake conversion today

07-13-2013, 12:39 PM	#46
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: First Steps LS Swap...... Sorry for sidetracking your thread. I'll edit my post if you'd like. I'll be following along as I should be starting a ls swap soon Posted via Mobile Device

07-13-2013, 01:23 PM	#47
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Np, every little bit helps.

07-14-2013, 09:14 PM	#48
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Sooo, there I am, under the truck working on the 5 lug disc conversion when I decide to take a look at how the tank is gonna fit.............and there it is.......... Attached Images Last edited by lynnfield; 07-14-2013 at 09:21 PM.

08-09-2013, 02:38 AM	#49
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: First Steps LS Swap...... Haha! That's a Texas truck! What did you expect?! (I'm from TX btw) Is it gone yet? __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

10-15-2013, 08:03 PM	#50
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: First Steps LS Swap...... Been away for a while, work has been busy and both the kids are in sports. What can I say? As of right now I have the disc brake conversion done, rebuilt the posi unit in the rear end and removed the mess that was the trailer hitch. I still need to replace the rear crossmember, but I plan on doing that later. As soon as it stops raining, I am going to push the 70' out and put the 06' in and start pulling the engine from the donor. Attached Images

Register or Log In To remove these advertisements.