Hello,,new member sayin' "Hey!" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

danielwetpaint · 02-20-2008, 12:49 AM

Hello,,I'm Danielwetpaint. I've been building all kinds of stuff since 1978.My very first project was a '63 Chevy II Nova 4 dr 327 powerglide.Then in 1980 my next project was a '68 lwb Chevy that I found for $500.oo,,I shaved everything,lowered,painted two tone pearl white with royal blue metallic,(the blue on the bottom following the body contour lines). I found a wrecked '68 Impala that had a new blue vinyl pleated seat,so I pirated that along with some spoked hubcaps.I dyed the pad on the dash the same color with aerosol spray. I cut the center horizontal bar out of the grill and lined the whole opening with factory trim.The inside actual grill was 7/16ths tubular polished conduit run horizontally. It was a neat old truck that I enjoyed for years. I've had several since then.I worked on and off in different occupations since HS,(always falling back into paint n' body and building). I have accumulated 3 years of College. In the later 80's I married and found 10 acres that I cleared about half. I then moved a new mobile home on it and started building a shop.I poured 525 bags of cement in the floor with an electric mixer (back then no trucks would come out). The rest of the building, I welded from 2" round tube called drilling stem(oil well pipe). The first shop is/was only 24' x 24'. I'm poor lol, I mean you gotta crawl before you can walk.I do as much as I can. As time worked out,I later added on a 30 x 40 that is 1/3 the way done.Thats where I left off,even to today. 2 1/2 years ago I started building my own house and I am currently just about finished.I should be completely done this summer.I have thousands of digital pictures of the process. In the mean time to keep sane,,lol,,, I've been building a 1948 Stylemaster 2 dr. I found a decent body on ebay and traded a (junky) '95 V8 S-10 I had for it. Since then,I've put in an '85 Monte front end. A '70 Nova rear end. New wiring, late model column,350/350,,etc. I am building it into rat rod type of car but much more finished.The biggest problem, I hated the length of the front fenders and have shortened one side (so far) 11 inches.I'll do the other side later.Thats where I left off. As soon as it warms up a bit I'll get back on it. I'm "danielwetpaint" on Youtube and theres a couple of my vids there.I'm an old school car guy that does the best he can. OK,,thats my intro,,Great site and Thanks.

shaneschevys · 02-20-2008, 01:10 AM

Welcome from FT Worth TX.

jsbgump · 02-20-2008, 03:07 AM

Welcome to the board from Texas

72BlckButy · 02-20-2008, 04:23 AM

to the board from Mid-MO!!!

Cyclone44 · 02-20-2008, 04:56 AM

from Knoxville Tn....

**Yukon Jack** · 02-20-2008, 04:56 AM

Welcome from Kansas!

DREAMS OF A 67 · 02-20-2008, 08:11 AM

Welcome From Knoxville Tn!!!

krue · 02-20-2008, 10:48 AM

Welcome to the board from South Mississippi!

**Ron 586** · 02-20-2008, 11:12 AM

Welcome to the board from West Tennessee.

L0WRIDE · 02-20-2008, 04:27 PM

Welcome to the boards

tcb-1 · 02-23-2008, 08:31 AM

Welcome aboard from Shawnee, KS!

Old Chevy Mech · 02-23-2008, 07:48 PM

From CT!

Frank

86swb · 02-23-2008, 08:10 PM

Welcome to the board from Western Kentucky.

mfishburn · 02-24-2008, 12:51 AM

Welcome from South Carolina. Sounds like you have some neat projects going on.

02-20-2008, 12:49 AM	#1
danielwetpaint Registered User Join Date: Feb 2008 Location: Wye Mtn Ark Posts: 58	Hello,,new member sayin' "Hey!" Hello,,I'm Danielwetpaint. I've been building all kinds of stuff since 1978.My very first project was a '63 Chevy II Nova 4 dr 327 powerglide.Then in 1980 my next project was a '68 lwb Chevy that I found for $500.oo,,I shaved everything,lowered,painted two tone pearl white with royal blue metallic,(the blue on the bottom following the body contour lines). I found a wrecked '68 Impala that had a new blue vinyl pleated seat,so I pirated that along with some spoked hubcaps.I dyed the pad on the dash the same color with aerosol spray. I cut the center horizontal bar out of the grill and lined the whole opening with factory trim.The inside actual grill was 7/16ths tubular polished conduit run horizontally. It was a neat old truck that I enjoyed for years. I've had several since then.I worked on and off in different occupations since HS,(always falling back into paint n' body and building). I have accumulated 3 years of College. In the later 80's I married and found 10 acres that I cleared about half. I then moved a new mobile home on it and started building a shop.I poured 525 bags of cement in the floor with an electric mixer (back then no trucks would come out). The rest of the building, I welded from 2" round tube called drilling stem(oil well pipe). The first shop is/was only 24' x 24'. I'm poor lol, I mean you gotta crawl before you can walk.I do as much as I can. As time worked out,I later added on a 30 x 40 that is 1/3 the way done.Thats where I left off,even to today. 2 1/2 years ago I started building my own house and I am currently just about finished.I should be completely done this summer.I have thousands of digital pictures of the process. In the mean time to keep sane,,lol,,, I've been building a 1948 Stylemaster 2 dr. I found a decent body on ebay and traded a (junky) '95 V8 S-10 I had for it. Since then,I've put in an '85 Monte front end. A '70 Nova rear end. New wiring, late model column,350/350,,etc. I am building it into rat rod type of car but much more finished.The biggest problem, I hated the length of the front fenders and have shortened one side (so far) 11 inches.I'll do the other side later.Thats where I left off. As soon as it warms up a bit I'll get back on it. I'm "danielwetpaint" on Youtube and theres a couple of my vids there.I'm an old school car guy that does the best he can. OK,,thats my intro,,Great site and Thanks.

02-20-2008, 01:10 AM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Hello,,new member sayin' "Hey!" Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

02-20-2008, 03:07 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Hello,,new member sayin' "Hey!" Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-20-2008, 04:23 AM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hello,,new member sayin' "Hey!" to the board from Mid-MO!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-20-2008, 04:56 AM	#5
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Hello,,new member sayin' "Hey!" from Knoxville Tn....

02-20-2008, 04:56 AM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Hello,,new member sayin' "Hey!" Welcome from Kansas! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-20-2008, 08:11 AM	#7
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Hello,,new member sayin' "Hey!" Welcome From Knoxville Tn!!!

02-20-2008, 10:48 AM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Hello,,new member sayin' "Hey!" Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-20-2008, 11:12 AM	#9
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: Hello,,new member sayin' "Hey!" Welcome to the board from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

02-20-2008, 04:27 PM	#10
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Hello,,new member sayin' "Hey!" Welcome to the boards __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

02-23-2008, 08:31 AM	#11
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Hello,,new member sayin' "Hey!" Welcome aboard from Shawnee, KS! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

02-23-2008, 07:48 PM	#12
Old Chevy Mech Keepin it runnin! Join Date: Oct 2007 Location: Deep River, CT Posts: 1,036	Re: Hello,,new member sayin' "Hey!" From CT! Frank __________________ 1970 K-5 4X4 Blazer 1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it"

02-23-2008, 08:10 PM	#13
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: Hello,,new member sayin' "Hey!" Welcome to the board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

02-24-2008, 12:51 AM	#14
mfishburn Registered User Join Date: Sep 2007 Location: Greenville, SC Posts: 60	Re: Hello,,new member sayin' "Hey!" Welcome from South Carolina. Sounds like you have some neat projects going on. __________________ 1972 Chevy C-10 Fleetside 1979 Pontiac Trans Am 1980 Chevy Camaro (my dads) Last edited by mfishburn; 02-24-2008 at 12:51 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.