The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2018, 12:55 PM   #601
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

Quote:
Originally Posted by Honest Bob View Post
Awesome work! I just finished reading through the entire thread.

I've been trying to research how to 4x4 swap a 2wd 1 ton and so much of the information out there is wrong or does not take into account the differences between the 1/2, 3/4 and 1 ton frames. Thanks for taking the time to document everything you've done its been an immense help.
Thank you!!!!!

You are absolutely correct about all the misinformation. I am so glad to help anyone through this. This kit I installed on my truck has now been installed on quite a few other trucks now to help them convert their 1 tons and crew cabs to 4wd!
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 11-12-2018, 05:05 PM   #602
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

Trying to see all what I have for this build and figure up what is left to buy. Also noticed I have noticed I some how ended up with 2 boost gauges... I kind of would either like to find a RPM gauge that matches the 2 banks gauges or I guess find a pyrometer and RPM gauge to match the ISSPRO one.
Attached Images
  
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 11-26-2018, 04:32 PM   #603
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

Finally got one of our aftermarket skid plates made for my truck! I really like this thing.

Also, wanted to show off my partners 4-linked & bag swap. Its really coming together.
Attached Images
    
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 11-27-2018, 02:37 PM   #604
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
Re: Let's Build A 1 Ton Crew Cab 4x4

You are correct... That 4 link set up is looking good. The fancy link bars aren't for me, but I can appreciate the work involved. I can't wait to link and bag mine. That will be a fun project.
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
04 1500 crew cab
http://67-72chevytrucks.com/vboard/s...d.php?t=786514
daddyjeep is offline   Reply With Quote
Old 11-27-2018, 04:14 PM   #605
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

Glad you like it! Yeah the link bars are mostly just for show and since we have a plasma table we wanted to cut them out and make them look cool.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 11-28-2018, 01:49 PM   #606
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
Re: Let's Build A 1 Ton Crew Cab 4x4

Quote:
Originally Posted by NastyBuzzard View Post
Glad you like it! Yeah the link bars are mostly just for show and since we have a plasma table we wanted to cut them out and make them look cool.
It makes sense to showcase the kind of work you can do. Regular boring round tube links aren't going to get much attention. A lot of people won't notice the link brackets and stuff, but those bars will get their attention and draw them in.
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
04 1500 crew cab
http://67-72chevytrucks.com/vboard/s...d.php?t=786514
daddyjeep is offline   Reply With Quote
Old 09-17-2021, 01:53 PM   #607
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

A few photo updates. I finally had to go snatch back all my parts from my painter. 3 years it spent in paint jail with nearly no progress. I am getting back on track now. The photo with primer is how it is sitting at the moment.
Attached Images
    
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 09-17-2021, 03:07 PM   #608
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
Re: Let's Build A 1 Ton Crew Cab 4x4

Glad to see you back at it
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
04 1500 crew cab
http://67-72chevytrucks.com/vboard/s...d.php?t=786514
daddyjeep is offline   Reply With Quote
Old 09-18-2021, 12:13 PM   #609
lunatic1968
Registered User
 
Join Date: Jan 2006
Location: Clinton, tn
Posts: 177
Re: Let's Build A 1 Ton Crew Cab 4x4

Nice ride! sorry to hear about your stint in Paint Prison . So whats the plan?
lunatic1968 is offline   Reply With Quote
Old 09-20-2021, 06:53 AM   #610
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

I have found someone else to paint it. We are making decent progress. It will be all black with several coats of clear so I can maintain the finish for several years with paint correction and coating.

So far sticking with the 6.5 diesel with the banks turbo setup and NV4500. I have a spare LB7 duramax I am about to start rebuilding that may end up in it if I can find a way to mate it to the NV4500 or find a good enough deal on a ZF6.

I'm also currently building a new house so I'll have to prioritize it at the moment.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 09-20-2021, 09:46 AM   #611
WilliamFd55
Registered User
 
Join Date: Dec 2016
Location: Glen Rock, NJ
Posts: 258
Re: Let's Build A 1 Ton Crew Cab 4x4

I remember this beast. Good to see you are back at it!
WilliamFd55 is offline   Reply With Quote
Old 09-27-2021, 02:14 PM   #612
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

One thing I noticed from the side view was that my silver tank stuck out like a sore thumb but also I realized that I did not have it mounted flat at all.

So I dropped it, took the mount out and a friend of mine came over and we devised a way to rework the factory suburban bracket to fit in my frame and mount it level. I also had to paint it black so maybe it would stick out less.

I also had an issue with my new tailgate and new hardware. I finally realized the issue when comparing it with the factory mount. Once I ground it down I was able to fit the new tailgate properly. Glad I am doing this now bc I rubbed some paint off the first go round.

I also am test fitting the bumper. I'm having to modify the end of my frame some more as well as chop up my new factory style brackets. I am still missing the inner DS bracket though because they are on back order so I cant finish the bumper modification. If anyone has one let me know a price please. Also, anyone ever modify the bumper to get rid of the round carriage bolt heads?
Attached Images
     
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 09-28-2021, 10:42 AM   #613
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
Re: Let's Build A 1 Ton Crew Cab 4x4

I have seen guys just weld the carriage bolts to the bumper and grind off the head, but haven't done so myself.
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
04 1500 crew cab
http://67-72chevytrucks.com/vboard/s...d.php?t=786514
daddyjeep is offline   Reply With Quote
Old 10-05-2021, 09:21 AM   #614
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

I got the newly modified front tank mounting bracket installed. I'm waiting on the tank insulation to arrive before reinstalling it.

I even played around and put the fuel door on. I'm really liking how it turned out.

Next I started working on the tailgate band. I originally wasn't planning to run one so I ordered a new tailgate without holes. Now I am considering whether to double side tape it or add the holes. Luckily someone on a Facebook group was nice enough to go measure their gate and give me dimensions.

I took it apart to fix the dents and weld the holes. It will be blacked out with the rest of the truck.

I also saw a picture of these very interesting door panels but no one knew who made them. Anyone seen these in a thread before?
Attached Images
    
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 10-08-2021, 02:08 PM   #615
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

I'm in love with these LS-Fab billet anodized door handles.
Attached Images
   
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 10-09-2021, 08:53 PM   #616
evan
Registered User
 
evan's Avatar
 
Join Date: Jul 2005
Location: SK, Canada
Posts: 488
Re: Let's Build A 1 Ton Crew Cab 4x4

Thanks for pointing out the tailgate hardware issue. I'll keep an eye out for that.

Those billet handles look sweet. If you can afford 4 I should be able to afford 2, right...
__________________
Evan B.
evan is offline   Reply With Quote
Old 10-14-2021, 09:22 AM   #617
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,273
Re: Let's Build A 1 Ton Crew Cab 4x4

My painter is back in town and we are back at it. Spent a little time last night working through what the previous person did to fix the bed where it was dropped on the corner. Come to find out it was bondo city and didn't even need to be. I also found he reworked my original patch for the fuel door and did what I think to be a worse job. Just glad we are addressing it now.

Also, after a month or so my flush mount rear glass arrived! Now to store it somewhere safe until it is time to install.
Attached Images
   
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote
Old 10-15-2021, 10:12 AM   #618
daddyjeep
Registered User
 
daddyjeep's Avatar
 
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
Re: Let's Build A 1 Ton Crew Cab 4x4

yikes.... that was a lot of bondo
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939
87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html
04 1500 crew cab
http://67-72chevytrucks.com/vboard/s...d.php?t=786514
daddyjeep is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com