The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-17-2018, 03:14 PM   #1
Greasey Harley
Registered User
 
Greasey Harley's Avatar
 
Join Date: May 2013
Location: Post Falls, ID
Posts: 884
New clutch doesn't work

I blew up my clutch in my '68 c10 this summer (kuz I got a lead foot)
I let it set around and finally got around to putting a clutch in it this week.
Put a Rhino pac diaphragm style, stock clutch in it. hooked everything up and the clutch just isn't there. almost no resistance, pedal goes right to the floor.
Can't adjust it any further. Something is definitely wrong.
everything seems to be installed properly. This is about my 20th clutch swap (not all on the same truck), first major problem I've ever had.
Any guesses? Thoughts,
I'm about to go back out there and re-remove the engine and take a closer look.
Pretty simple unit, I can't imagine what I might be missing.
Has to be one of three things
1: Wrong clutch kit
2: Defective parts
3: Improper installation

-Russ
Greasey Harley is offline   Reply With Quote
Old 11-17-2018, 04:00 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,509
Re: New clutch doesn't work

Wrong throw out bearing!
Is it a flat or raised finger pressure plate?
geezer#99 is online now   Reply With Quote
Old 11-17-2018, 04:03 PM   #3
Shinysideup
Registered User
 
Shinysideup's Avatar
 
Join Date: Apr 2012
Location: Ocala,Fl
Posts: 733
Re: New clutch doesn't work

I would think crawling back under there and proper visual inspection of throw-out bearing, clutch arm, and linkages will show you where it doesnt work.
__________________
._____________
..\ .___ . . . . _ . .\. . . . . . . . . . . ___
..| /_+_/ ___ |o| ...}. . . . . ______i__!\____
. [_____(O)_|_'|__}>-------[-_(O)__i'___i (O)-]


Quote:
Originally Posted by 68 P.O.S. View Post
No thank you on that lifetime warranty. I don't want a turd for life.
Shinysideup is offline   Reply With Quote
Old 11-17-2018, 05:43 PM   #4
Greasey Harley
Registered User
 
Greasey Harley's Avatar
 
Join Date: May 2013
Location: Post Falls, ID
Posts: 884
Re: New clutch doesn't work

Quote:
Originally Posted by geezer#99 View Post
Wrong throw out bearing!
I an leaning toward this. My buddy, Randy is going to come have a look before I tear it apart again. He has worked in transmission shops for 40 odd years. He also suspects a short throw out bearing where there should be a long one.
Greasey Harley is offline   Reply With Quote
Old 11-17-2018, 05:45 PM   #5
AussieinNC
Moderator
 
AussieinNC's Avatar
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,153
Re: New clutch doesn't work

1. There are 3 different height throwout bearings for diaphragm style chevy clutches.

2. A common error is to install the fork incorrectly...

see this link as it shows it all in one post...

http://garage.grumpysperformance.com...-bearing.6258/

__________________
Family and country before all others...

2006 Chevy Silverado (Daily Driver)
2012 Chevy Equinox

AussieinNC is offline   Reply With Quote
Old 11-21-2018, 01:58 PM   #6
Greasey Harley
Registered User
 
Greasey Harley's Avatar
 
Join Date: May 2013
Location: Post Falls, ID
Posts: 884
Re: New clutch doesn't work

Quote:
Originally Posted by Greasey Harley View Post
I blew up my clutch in my '68 c10 this summer (kuz I got a lead foot)....
.... Pretty simple unit, I can't imagine what I might be missing.
Has to be one of three things
1: Wrong clutch kit
2: Defective parts
3: Improper installation

-Russ
Update:

I was sippin' on beer , cleaning up the shop this weekend , just staring down my truck, one thing let to another and I started ripping it back apart. I don't normally turn wrenches while intoxicated, but I was PO'ed and annoyed, so I did.
I tore the linkage apart, inspected it, with one eye closed, so I could focus. In my enhanced state, I couldn't find anything wrong with the apparatus.
It dawned on me that I was in no condition to R&R a clutch, so I did the only sensible thing; I drank a couple more beers and proceed to reassemble the clutch linkage.
That's where it gets weird.
I slammed the whole thing back together, using the exact same parts, and it worked perfectly. WTF?
I have no idea how or why. I was careful and SOBER when I first put it together, I was basically $#!tfaced when I reassembled it this time.
All I did was disassemble then reassemble the linkage.
Granted, being a 50 year old truck, the linkage is rather sloppy, but it works as well I have ever seen.
I have gone back over that thing multiple times (while sober), I have NO IDEA why it didn't work the first time, nor am I sure what changed to make it work now.

-Russ
Greasey Harley is offline   Reply With Quote
Old 11-21-2018, 02:23 PM   #7
Redneck Rydes
Registered User
 
Redneck Rydes's Avatar
 
Join Date: Feb 2016
Location: Trenton,Ontario & South Carolina
Posts: 755
Re: New clutch doesn't work

I have had the same problem with putting things back together,No Beer, doesn't work,sit back in my chair drink 5 beers,go at it again, works just fine, beer make things clearer.LOL
Redneck Rydes is offline   Reply With Quote
Old 11-21-2018, 05:59 PM   #8
jeffahart
Senior Member
 
jeffahart's Avatar
 
Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,881
Re: New clutch doesn't work

Maybe you had it installed with the rod in the outer hole of the fork and reassembled it with it in the inner hole. The pedal spring will give enough tension to fake you out a bit. Possibly!

Drinking and wrenching is a sport for me!


j
__________________
White K20
jeffahart is offline   Reply With Quote
Old 11-21-2018, 07:21 PM   #9
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: New clutch doesn't work

I wonder if I started Drinking I might start working on my trucks ?
flashed is offline   Reply With Quote
Old 11-21-2018, 07:21 PM   #10
Grumpy old man
Senior Member
 
Grumpy old man's Avatar
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
Re: New clutch doesn't work

Beer makes you smart ...It made Bud weiser

My friend and I were at the local pub drinking the other night. I looked over and said, "Hey man, look at those two old drunk bas-ards over there. That'll be us in a few more years". He glanced over, looked at me and said "You drunk idiot, that's a mirror!"


A man walks into a bar and up to the counter. The bartender asks him, "what can I get for you today." The man replies, "I'll take three glasses of your most rare bourbon barrel aged russian imperial stout." As fast as the bartender was pouring the man was downing the beers even faster one after another. Stunned the bartender asks, "I've never seen anyone drink that fast before." "You'd drink that fast if you had what I had," said the man. "What do you have," asks the bartender. Turning around the man replies, "fifty cents."

__________________

1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
Grumpy old man is offline   Reply With Quote
Old 11-21-2018, 07:51 PM   #11
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: New clutch doesn't work

Lol.
flashed is offline   Reply With Quote
Old 11-25-2018, 08:24 PM   #12
El Dorado Jim
Registered User
 
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
Re: New clutch doesn't work

Quote:
Originally Posted by Grumpy old man View Post
Beer makes you smart ...It made Bud weiser

My friend and I were at the local pub drinking the other night. I looked over and said, "Hey man, look at those two old drunk bas-ards over there. That'll be us in a few more years". He glanced over, looked at me and said "You drunk idiot, that's a mirror!"


A man walks into a bar and up to the counter. The bartender asks him, "what can I get for you today." The man replies, "I'll take three glasses of your most rare bourbon barrel aged russian imperial stout." As fast as the bartender was pouring the man was downing the beers even faster one after another. Stunned the bartender asks, "I've never seen anyone drink that fast before." "You'd drink that fast if you had what I had," said the man. "What do you have," asks the bartender. Turning around the man replies, "fifty cents."

El Dorado Jim is offline   Reply With Quote
Old 11-26-2018, 09:29 AM   #13
panhead59
Registered User
 
Join Date: Feb 2012
Location: Vinton, Va.
Posts: 473
Re: New clutch doesn't work

And to imagine they call you Grumpy !
__________________
"You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom)

1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK.
1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive !
panhead59 is offline   Reply With Quote
Old 11-26-2018, 09:45 AM   #14
Grumpy old man
Senior Member
 
Grumpy old man's Avatar
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
Re: New clutch doesn't work

The millennials call me Grumpy ,Even my own kids , The old guy's consider me Normal ? Ok , Maybe just a few do ...Alright , one or two do ....Never mind ....
__________________

1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
Grumpy old man is offline   Reply With Quote
Old 11-26-2018, 10:21 PM   #15
AussieinNC
Moderator
 
AussieinNC's Avatar
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,153
Re: New clutch doesn't work

Quote:
Originally Posted by Grumpy old man View Post
The millennials call me Grumpy ,Even my own kids , The old guy's consider me Normal ? Ok , Maybe just a few do ...Alright , one or two do ....Never mind ....
You are totally normal Grumpy....ya have to be to be such a great source of knowledge and humor....

Beer keeps me sane...

Stay warm young man...
__________________
Family and country before all others...

2006 Chevy Silverado (Daily Driver)
2012 Chevy Equinox

AussieinNC is offline   Reply With Quote
Old 11-26-2018, 10:33 PM   #16
jeffahart
Senior Member
 
jeffahart's Avatar
 
Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,881
Re: New clutch doesn't work

Quote:
Originally Posted by Grumpy old man View Post
Beer makes you smart ...It made Bud weiser

My friend and I were at the local pub drinking the other night. I looked over and said, "Hey man, look at those two old drunk bas-ards over there. That'll be us in a few more years". He glanced over, looked at me and said "You drunk idiot, that's a mirror!"

Good one!
__________________
White K20
jeffahart is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com