KS Folding Jack Handle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-31-2019, 01:42 PM

Found another folding jack handle in the parts stash while searching for something else. Really need to do a complete look thru and get an idea of just what I do have. 'Course I think about this now with winter approaching, LOL.

Jack handle measures 47'' on the straight leg when assembled with the slide collar. 54'' total length from tip to tip, 29'' when folded. Rivet pin has some wear but not sloppy loose. $20 plus shipping, money order, do not have Paypal.

**Ironhorse** · 11-10-2019, 11:18 AM

Ba-bump to da top

**cwcarpenter98** · 11-10-2019, 04:10 PM

If the the measurements of the end that goes into the jack are roughly around 1 1/4" x just under a 1/2", would you do $25 shipped to 31061?

Those are the measurement's I just took from the jack on my 63

**Ironhorse** · 11-10-2019, 07:49 PM

Seems to measure just about an 1'' and a bit under 1/2'' in the width of the tip that goes into the jack. Any jack handles I have seen are all the same at the operating tip end. Shipping to Milledgeville, Ga. 31061 is just under $13 USPS Parcel. Would do $28 to your door, shipping is what it is, will drop the price to $15 plus $13 shipping if wanting it.

**cwcarpenter98** · 11-10-2019, 07:59 PM

That will work for me. Hopefully I won't have to use it, but if I do, I'll be glad it's there.

Please send me payment details and I'll figure out how to do a money order.

Thanks,
Christian

**Ironhorse** · 11-10-2019, 09:46 PM

Quote:

Originally Posted by cwcarpenter98

That will work for me. Hopefully I won't have to use it, but if I do, I'll be glad it's there.

Please send me payment details and I'll figure out how to do a money order.

Thanks,
Christian

JACK HANDLE SOLD to cwcarpenter98. PM sent with payment info. Thanks for the purchase.

**cwcarpenter98** · 11-14-2019, 12:26 AM

Money order went out today. Thanks Gary!

**cwcarpenter98** · 11-18-2019, 11:39 AM

Hey Gary, just checking to see if the money order arrived.

**Ironhorse** · 11-18-2019, 06:26 PM

Just arrived this morning and shipped the jack handle this afternoon. PM sent with tracking numbers. Thanks again and may you never have to use it,

**cwcarpenter98** · 11-18-2019, 08:31 PM

Quote:

Originally Posted by Ironhorse

Just arrived this morning and shipped the jack handle this afternoon. PM sent with tracking numbers. Thanks again and may you never have to use it,

I'd rather have it and not need it than not have it and need it

I'll keep my eyes peeled for it. Thanks!!

**cwcarpenter98** · 11-21-2019, 03:26 PM

Hey Gary, the handle showed up yesterday. I didn't even realize that the handle kinda "clips" in to the jack so you can move it around and such. It works great with my jack, so now I hope I'll never need it on the side of the highway

Thanks again!!

**Ironhorse** · 11-21-2019, 07:21 PM

Thanks for letting me know the jack handle arrived and your pleased with it. I have one in my '71 4x4 and over the years have been lucky enough to only have to use it ONCE but was sure glad I did have it. I also carry a flat piece of 1/4'' steel under the seat in case the ground is a bit soft to keep the jack from sinking in.

**cwcarpenter98** · 11-21-2019, 10:43 PM

Quote:

Originally Posted by Ironhorse

Thanks for letting me know the jack handle arrived and your pleased with it. I have one in my '71 4x4 and over the years have been lucky enough to only have to use it ONCE but was sure glad I did have it. I also carry a flat piece of 1/4'' steel under the seat in case the ground is a bit soft to keep the jack from sinking in.

Thanks for that tip about the flat piece of steel. I think I have a piece that would be great for that somewhere in the garage. I'll have to go looking for it

10-31-2019, 01:42 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Folding Jack Handle Found another folding jack handle in the parts stash while searching for something else. Really need to do a complete look thru and get an idea of just what I do have. 'Course I think about this now with winter approaching, LOL. Jack handle measures 47'' on the straight leg when assembled with the slide collar. 54'' total length from tip to tip, 29'' when folded. Rivet pin has some wear but not sloppy loose. $20 plus shipping, money order, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-10-2019, 11:18 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Folding Jack Handle Ba-bump to da top __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-10-2019, 04:10 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Folding Jack Handle If the the measurements of the end that goes into the jack are roughly around 1 1/4" x just under a 1/2", would you do $25 shipped to 31061? Those are the measurement's I just took from the jack on my 63 __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-10-2019, 07:49 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Folding Jack Handle Seems to measure just about an 1'' and a bit under 1/2'' in the width of the tip that goes into the jack. Any jack handles I have seen are all the same at the operating tip end. Shipping to Milledgeville, Ga. 31061 is just under $13 USPS Parcel. Would do $28 to your door, shipping is what it is, will drop the price to $15 plus $13 shipping if wanting it. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-10-2019, 07:59 PM	#5
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Folding Jack Handle That will work for me. Hopefully I won't have to use it, but if I do, I'll be glad it's there. Please send me payment details and I'll figure out how to do a money order. Thanks, Christian __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-14-2019, 12:26 AM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Folding Jack Handle Money order went out today. Thanks Gary! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-18-2019, 11:39 AM	#8
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Folding Jack Handle Hey Gary, just checking to see if the money order arrived. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-18-2019, 06:26 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Folding Jack Handle Just arrived this morning and shipped the jack handle this afternoon. PM sent with tracking numbers. Thanks again and may you never have to use it, __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-21-2019, 03:26 PM	#11
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Folding Jack Handle Hey Gary, the handle showed up yesterday. I didn't even realize that the handle kinda "clips" in to the jack so you can move it around and such. It works great with my jack, so now I hope I'll never need it on the side of the highway Thanks again!! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-21-2019, 07:21 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Folding Jack Handle Thanks for letting me know the jack handle arrived and your pleased with it. I have one in my '71 4x4 and over the years have been lucky enough to only have to use it ONCE but was sure glad I did have it. I also carry a flat piece of 1/4'' steel under the seat in case the ground is a bit soft to keep the jack from sinking in. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.