1967 - 1968 Chevy / GMC Truck Hood Very Good Condition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ironworking · 10-03-2019, 09:47 PM

This came from a Chevy, but as you probably know; it will fit a Jimmy as well.

In very good shape with only a couple of pin holes.

I usually deal in Task Force, so can anyone tell me what i should ask for this?
A reasonable price.

**Ironhorse** · 10-03-2019, 10:05 PM

With the Chevrolet bow tie on the hood lip and looking at the front leading edge looks to be a 69-70 hood, not the 67-68 style. 67-68 had Chevrolet spelled out across the front with individual letters. 71-72 Chevrolet had bow tie in the grill center. Any rust on underneath side, where are the pin holes? I'm thinking maybe $75-$125 depending on overall condition after seeing it in person.

Ironworking · 10-03-2019, 10:14 PM

Quote:

Originally Posted by Ironhorse

With the Chevrolet bow tie on the hood lip and looking at the front leading edge looks to be a 69-70 hood, not the 67-68 style. 67-68 had Chevrolet spelled out across the front with individual letters. 71-72 Chevrolet had bow tie in the grill center. Any rust on underneath side, where are the pin holes? I'm thinking maybe $75-$125 depending on overall condition after seeing it in person.

I just checked on LMC an it is a 69 - 72 hood. The two pin holes are on the bottom of the front lip. That is the only rot i could find anywhere!

Ironworking · 10-03-2019, 10:18 PM

Sheet metal cost more than that. I can cut it up and use the sheet metal to make other things. Save me from buying new metal.

Oh, well. I haven't lost anything.

10-03-2019, 09:47 PM	#1
Ironworking Registered User Join Date: Apr 2019 Location: New Boston, Tx Posts: 198	1967 - 1968 Chevy / GMC Truck Hood Very Good Condition This came from a Chevy, but as you probably know; it will fit a Jimmy as well. In very good shape with only a couple of pin holes. I usually deal in Task Force, so can anyone tell me what i should ask for this? A reasonable price. Attached Images __________________ Ironworking's "diamond" in the rough 58 chevy lwb fleetside custom build. 100% Service Connected Disabled Vietnam Era Veteran.

10-03-2019, 10:05 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,024	Re: 1967 - 1968 Chevy / GMC Truck Hood Very Good Condition With the Chevrolet bow tie on the hood lip and looking at the front leading edge looks to be a 69-70 hood, not the 67-68 style. 67-68 had Chevrolet spelled out across the front with individual letters. 71-72 Chevrolet had bow tie in the grill center. Any rust on underneath side, where are the pin holes? I'm thinking maybe $75-$125 depending on overall condition after seeing it in person. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-03-2019, 10:18 PM	#4
Ironworking Registered User Join Date: Apr 2019 Location: New Boston, Tx Posts: 198	Re: 1967 - 1968 Chevy / GMC Truck Hood Very Good Condition Sheet metal cost more than that. I can cut it up and use the sheet metal to make other things. Save me from buying new metal. Oh, well. I haven't lost anything. __________________ Ironworking's "diamond" in the rough 58 chevy lwb fleetside custom build. 100% Service Connected Disabled Vietnam Era Veteran.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.