TX Parting my 74 jimmy project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zimmstoy · 05-10-2011, 11:29 PM

Hey everyone. I got to a point on my project that this truck is just too far gone for me to continue with any longer. Here is what I have

2WD Blazer Frame (partial POR15 and New Body Bushings) rolling - $550
Windsheild Frame for 73-75 Blazer or Jimmy - $250
Roof from 74 Jimmy - $300
Tailgate from 74 Jimmy (no glass) - $150
Rear Quarters (OEM) from 90 Blazer - $250 each
Tailgate (OEM) with Glass from 90 Blazer - $250
GMC Hood (OEM) from 74 GMC Jimmy - $200
GMC Grille (OEM) from 74 GMC Jimmy - $200
GMC Fender Emblems from 74 GMC Jimmy - $150
GMC Core Support from 74 GMC Jimmy - $100
GMC Doors (OEM) A little rough from 74 GMC Jimmy - $100 for both
LMC Doors (NEW) Cut down for 74 Blazer / Jimmy - $100 each
LMC Fenders (NEW) for 73-79 Blazer / Jimmy or Truck - $100 each
LMC Replacement Kick Panels (NEW #1) - $15 each
LMC Replacement Floor (NEW #3) - $30
LMC Replacement Floor (NEW #4) - $30
LMC Replacement Floor (NEW #5) - $90
LMC Replacement Floor (NEW #6) - $90
LMC Replacement Inner Rockers (NEW #7) - $10 each
LMC Replacement Inner Rockers (NEW #8) - $5 each
LMC Replacement Outer Rockers (NEW #9) - $15 each
Tilt Steering Column - $100

CALL (512.963.NINE274) / EMAIL or PM me

glimmertwin01 · 05-19-2011, 03:49 PM

man I could use the hard top for my 73 too bad it would never get here from TX in one piece

zimmstoy · 05-21-2011, 11:37 PM

Ttt

scubasteve16 · 05-21-2011, 11:46 PM

I wonder what it would cost to ship these items to Abilene Kansas 67410
LMC Replacement Outer Rockers (NEW #9) - $15 each
LMC Fenders (NEW) for 73-79 Blazer / Jimmy or Truck - $100 each

zimmstoy · 05-21-2011, 11:55 PM

I can get a rough idea on that for you in the morning. Shouldn't be too bad.

scubasteve16 · 05-24-2011, 01:11 AM

Any update on a shipping estimate?

glimmertwin01 · 05-31-2011, 03:41 PM

do you have a pair of "Sierra" emblems for the rear of the quarters what abouot the GMC for the tailgate (that attaches on the upper left)

zimmstoy · 05-31-2011, 05:55 PM

Quote:

Originally Posted by scubasteve16

Any update on a shipping estimate?

sorry - ended up out of town. I will ship all 4 pieces for $35. Would that work for you?

zimmstoy · 05-31-2011, 05:56 PM

Quote:

Originally Posted by glimmertwin01

do you have a pair of "Sierra" emblems for the rear of the quarters what abouot the GMC for the tailgate (that attaches on the upper left)

I don't have those emblems. Sorry..

f.monroe · 06-01-2011, 12:19 AM

Can you post or email nice detailed pics of the hood? Email is frankwmon@gmail.com . I am interested in the condition of the hood. Any rust outside or inside the front leading edge? Ever been bent in the middle? Etc?
Frank

glimmertwin01 · 06-01-2011, 10:42 AM

ya had me goin for a second..... I cant find those anywhere (rear quarter emblems)...LOL

zimmstoy · 06-02-2011, 09:16 AM

Quote:

Originally Posted by f.monroe

Can you post or email nice detailed pics of the hood? Email is frankwmon@gmail.com . I am interested in the condition of the hood. Any rust outside or inside the front leading edge? Ever been bent in the middle? Etc?
Frank

Frank - sorry for the delay. Pics sent this morning. Hood is in great physical condition; just needs to be stripped and painted.

54Caddy · 06-03-2011, 12:08 AM

how much to ship both fenders to 93277

zimmstoy · 06-03-2011, 12:25 AM

i will call PAKMAIL in the morning to get an estimate on boxing and shipping them for you.

glimmertwin01 · 06-14-2011, 10:30 AM

do you have the rocker sill plates? how are they? how much to 14625?

zimmstoy · 06-19-2011, 02:53 PM

Quote:

Originally Posted by glimmertwin01

do you have the rocker sill plates? how are they? how much to 14625?

How does $100 shipped sound for all the rocker components shipped to you?
I used to goto school up in Rochester!

glimmertwin01 · 06-20-2011, 10:07 AM

all the rocker components? meaning? are they steel? I have one set but have 2 trucks...
could i see a pic?
where did you go to school? course of study?

zimmstoy · 06-21-2011, 10:55 PM

Quote:

Originally Posted by glimmertwin01

all the rocker components? meaning? are they steel? I have one set but have 2 trucks...
could i see a pic?
where did you go to school? course of study?

I will get some pics for you tomorrow. They are all brand new LMC pieces. I went to R.I.T. - Studied Information Technology. PM me your email address for the pictures.

glimmertwin01 · 06-22-2011, 08:55 AM

the LMC pieces I need are 29.95 a set.. (P/N 38-2400)
are you also talking about the threshold plates? I really dont have a desire for those as I will be placing anti skid "tape" on them to ease entry and egress.

K5Rodder · 05-28-2014, 07:38 PM

Rockers still available? How much if possible to ship rear quarter skins?

K5Rodder · 05-28-2014, 07:41 PM

Pics of the emblems?

**ScottH** · 05-30-2014, 12:36 AM

Would u sell the trans crossmember?

406 Q-ship · 06-28-2014, 04:57 PM

Do you still have the steering column and if so what shape is it in?

05-19-2011, 03:49 PM	#2
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project man I could use the hard top for my 73 too bad it would never get here from TX in one piece __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 05-19-2011 at 03:50 PM.

06-01-2011, 12:19 AM	#10
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Parting my 74 jimmy project Can you post or email nice detailed pics of the hood? Email is frankwmon@gmail.com . I am interested in the condition of the hood. Any rust outside or inside the front leading edge? Ever been bent in the middle? Etc? Frank __________________ Born and proudly residing in a Red State !

06-01-2011, 10:42 AM	#11
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project ya had me goin for a second..... I cant find those anywhere (rear quarter emblems)...LOL __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

06-03-2011, 12:08 AM	#13
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Parting my 74 jimmy project how much to ship both fenders to 93277 __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

06-03-2011, 12:25 AM	#14
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: Parting my 74 jimmy project i will call PAKMAIL in the morning to get an estimate on boxing and shipping them for you. __________________ Kind Regards, Scott

05-10-2011, 11:29 PM	#1
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Parting my 74 jimmy project Hey everyone. I got to a point on my project that this truck is just too far gone for me to continue with any longer. Here is what I have 2WD Blazer Frame (partial POR15 and New Body Bushings) rolling - $550 Windsheild Frame for 73-75 Blazer or Jimmy - $250 Roof from 74 Jimmy - $300 Tailgate from 74 Jimmy (no glass) - $150 Rear Quarters (OEM) from 90 Blazer - $250 each Tailgate (OEM) with Glass from 90 Blazer - $250 GMC Hood (OEM) from 74 GMC Jimmy - $200 GMC Grille (OEM) from 74 GMC Jimmy - $200 GMC Fender Emblems from 74 GMC Jimmy - $150 GMC Core Support from 74 GMC Jimmy - $100 GMC Doors (OEM) A little rough from 74 GMC Jimmy - $100 for both LMC Doors (NEW) Cut down for 74 Blazer / Jimmy - $100 each LMC Fenders (NEW) for 73-79 Blazer / Jimmy or Truck - $100 each LMC Replacement Kick Panels (NEW #1) - $15 each LMC Replacement Floor (NEW #3) - $30 LMC Replacement Floor (NEW #4) - $30 LMC Replacement Floor (NEW #5) - $90 LMC Replacement Floor (NEW #6) - $90 LMC Replacement Inner Rockers (NEW #7) - $10 each LMC Replacement Inner Rockers (NEW #8) - $5 each LMC Replacement Outer Rockers (NEW #9) - $15 each Tilt Steering Column - $100 CALL (512.963.NINE274) / EMAIL or PM me Attached Images __________________ Kind Regards, Scott

05-21-2011, 11:37 PM	#3
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: Parting my 74 jimmy project Ttt __________________ Kind Regards, Scott

05-21-2011, 11:46 PM	#4
scubasteve16 Registered User Join Date: Sep 2010 Location: Abilene Kansas Posts: 78	Re: Parting my 74 jimmy project I wonder what it would cost to ship these items to Abilene Kansas 67410 LMC Replacement Outer Rockers (NEW #9) - $15 each LMC Fenders (NEW) for 73-79 Blazer / Jimmy or Truck - $100 each __________________ "If it throws you back in the seat when it shifts, it was slowing down before it shifted" Disturbed Customs 1992 Chevy 1/2 ton 4x4 wore out 350 1975 Chevy 3/4 ton 4x4/ 8" suspension lift/ 468 Big Block/ 4 speed/ 4.56 gears/ 17' American Racing simulated beadlocks with Pro Comp 37x12.50 tires 1950 Pontiac Chieftain Straight 8/Hydromatic tranny

05-21-2011, 11:55 PM	#5
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: Parting my 74 jimmy project I can get a rough idea on that for you in the morning. Shouldn't be too bad. __________________ Kind Regards, Scott

05-24-2011, 01:11 AM	#6
scubasteve16 Registered User Join Date: Sep 2010 Location: Abilene Kansas Posts: 78	Re: Parting my 74 jimmy project Any update on a shipping estimate? __________________ "If it throws you back in the seat when it shifts, it was slowing down before it shifted" Disturbed Customs 1992 Chevy 1/2 ton 4x4 wore out 350 1975 Chevy 3/4 ton 4x4/ 8" suspension lift/ 468 Big Block/ 4 speed/ 4.56 gears/ 17' American Racing simulated beadlocks with Pro Comp 37x12.50 tires 1950 Pontiac Chieftain Straight 8/Hydromatic tranny

05-31-2011, 03:41 PM	#7
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project do you have a pair of "Sierra" emblems for the rear of the quarters what abouot the GMC for the tailgate (that attaches on the upper left) __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

06-14-2011, 10:30 AM	#15
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project do you have the rocker sill plates? how are they? how much to 14625? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

06-20-2011, 10:07 AM	#17
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project all the rocker components? meaning? are they steel? I have one set but have 2 trucks... could i see a pic? where did you go to school? course of study? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

06-22-2011, 08:55 AM	#19
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting my 74 jimmy project the LMC pieces I need are 29.95 a set.. (P/N 38-2400) are you also talking about the threshold plates? I really dont have a desire for those as I will be placing anti skid "tape" on them to ease entry and egress. __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

05-28-2014, 07:38 PM	#20
K5Rodder Registered User Join Date: May 2014 Location: Kannapolis, NC Posts: 79	Re: Parting my 74 jimmy project Rockers still available? How much if possible to ship rear quarter skins?



Register or Log In To remove these advertisements.

05-28-2014, 07:41 PM	#21
K5Rodder Registered User Join Date: May 2014 Location: Kannapolis, NC Posts: 79	Re: Parting my 74 jimmy project Pics of the emblems?

05-30-2014, 12:36 AM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,183	Re: Parting my 74 jimmy project Would u sell the trans crossmember? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

06-28-2014, 04:57 PM	#23
406 Q-ship Registered User Join Date: Oct 2010 Location: Largo Florida Posts: 632	Re: Parting my 74 jimmy project Do you still have the steering column and if so what shape is it in? __________________ Lifes journey is not to arrive at the gate well preserved, it is to slide in sideways all used up and wore out yelling.....God what'a ride! Where patience fails, force prevails Stapp's Ironical Paradox "The universal aptitude for ineptitude makes any human accomplishment an incredible miracle."

Register or Log In To remove these advertisements.