Wheeler dealers show c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rockyrivermark · 05-02-2019, 08:05 PM

Not my favorite car show but If there is a C10 on I’m tuning in
Anyone notice the width of those old school BF Goodrich radial TAs on it.
Any idea on what size they might be. Looked good on the truck.
Looking for new tires on my 15x7. 5 lugs.
Any ideas?
Thanks
Mark

70 shorty · 05-02-2019, 08:44 PM

I know they didn't mention the wheel width so, sorry no help there. As a general comment, I like what they did to the truck and didn't mind that it was a long bed.

**dave6672** · 05-02-2019, 08:46 PM

Sorry I can't help with your question but I did watch the episode. I generally like the show since it's not full of drama and foul language and can watch it in the presence of my daughter. I did chuckle when they mentioned that the truck had a "front disc brake conversion". It was a 1971 C10.

rockyrivermark · 05-02-2019, 09:00 PM

Quote:

Originally Posted by dave6672

Sorry I can't help with your question but I did watch the episode. I generally like the show since it's not full of drama and foul language and can watch it in the presence of my daughter. I did chuckle when they mentioned that the truck had a "front disc brake conversion". It was a 1971 C10.

Yeah. I caught that too. Funny.
The funniest one was on fandom works.
They broke two windshields and in the end couldn’t get the stainless trim in.
At least I’m not the only one struggling with windshield trim
I know the wheels where stock on the wheeler dealers episode Just don’t sure if they were 7 or 8” width. I’m not up to speed on that.
Getting tires this season and would like something wider
Love the look of the radial TAs

Astro-Balls · 05-02-2019, 09:13 PM

I noticed when he went to look at the truck it had a Lug Nut missing on a close up shot..

**jocko** · 05-02-2019, 11:35 PM

Quote:

Originally Posted by rockyrivermark

I know the wheels where stock on the wheeler dealers episode Just don’t sure if they were 7 or 8” width.

Stock GM, but not original to 67-72 era - rallies first available mid-squarebody era.. They do look good on just about any truck though! Agree, even staring at a picture of them, kinda hard to tell if 7" or 8".

TA_C10 · 05-03-2019, 12:08 AM

I'm looking at the episode and grabbed a screenshot. Looks very similar to my wheels which are a 275/60 R15.

Wheeler Dealer c10

My C10

72Cheyenne454 · 05-03-2019, 08:16 AM

I agree with TA, they look like 275/60-15's on 15x8's.

Same set up I ran for years on mine, except I used 15x7 passenger car style beauty rings on my 8" wheels -

**Rickysnickers** · 05-03-2019, 11:02 AM

As a side note, I liked the show more when Ed China was the mechanic.

**Smitty** · 05-03-2019, 11:09 AM

255/60 front and 175/60's rear on 8" wheels. Trim rings from an S-10. Been running this set up for 25 years.

weq92f · 05-03-2019, 11:24 AM

Quote:

Originally Posted by Rickysnickers

As a side note, I liked the show more when Ed China was the mechanic.

Ding ding ding ding ding ding ding..... I can't watch the show any more now. The new guy is just too..... not....Ed....China....

-klb

72hugger · 05-03-2019, 11:51 AM

Can a 700r4 be setup like they did? with no lock up switch etc

54blackhornet · 05-03-2019, 12:57 PM

The show lost me when Ed left. Can’t handle either of these guys in America. I did enjoy it when in England. Can’t believe they couldn’t find an American to work on American iron ?

michael bustamante · 05-03-2019, 01:06 PM

looks like 255-70-15 from the first pic

rockyrivermark · 05-03-2019, 03:37 PM

Cool. good info here as always.
thanks!
Mark

Big Kev-O · 05-03-2019, 04:46 PM

Quote:

Originally Posted by 72hugger

Can a 700r4 be setup like they did? with no lock up switch etc

I thought I heard them say it was a 200R4, I believe that is how they got away using the factory driveshaft. When they said it was a non-locking converter he really meant it does not unlock. 200R4 use locked converters.

The web says they got rid of Ed China as part of a plan to dumb down the show so it wasn't so technical. Looks like it worked, these dudes don't know what they are talking about. Just what we need, next they will add some scripts and staged arguments.

weq92f · 05-03-2019, 08:19 PM

.
This was his version of events that transpired to separate him from the show 2 years ago...

https://www.youtube.com/watch?v=8IB15T1LYiY

...Since then he may have divulged more info but that's enough for me.

-klb

**Grumpy old man** · 05-03-2019, 08:34 PM

I've never heard of him ,or the show ...

mikeshome · 05-03-2019, 09:00 PM

I like my TAs,Plus the previous owner added the spinners,

OregonNed · 05-04-2019, 06:33 AM

T/A's for me - 275's in back ans 235's out in front

Sparky dave · 05-10-2019, 04:57 AM

Don’t believe a word they say they are English �� I watched a couple of episodes. Is this the show where they buy a car do 5k of repair work and say they made a profit of 750 quid? Nice to see they did a c10 episode though I’m going to look out for that ��

tristan · 05-10-2019, 09:31 AM

Can't fault the new guy's taste in women.

Minkota · 05-10-2019, 10:40 AM

any chance the person that bought that truck is on this forum? chime in if you are....

**jeffahart** · 05-10-2019, 10:47 AM

Quote:

Originally Posted by tristan

Can't fault the new guy's taste in women.

05-02-2019, 08:05 PM	#1
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Wheeler dealers show c10 Not my favorite car show but If there is a C10 on I’m tuning in Anyone notice the width of those old school BF Goodrich radial TAs on it. Any idea on what size they might be. Looked good on the truck. Looking for new tires on my 15x7. 5 lugs. Any ideas? Thanks Mark __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

05-02-2019, 08:44 PM	#2
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: Wheeler dealers show c10 I know they didn't mention the wheel width so, sorry no help there. As a general comment, I like what they did to the truck and didn't mind that it was a long bed. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

05-02-2019, 08:46 PM	#3
dave6672 Senior Member Join Date: Jul 2008 Location: Carrollton, KY Posts: 1,188	Re: Wheeler dealers show c10 Sorry I can't help with your question but I did watch the episode. I generally like the show since it's not full of drama and foul language and can watch it in the presence of my daughter. I did chuckle when they mentioned that the truck had a "front disc brake conversion". It was a 1971 C10. __________________ Dave R. 1972 K20 1972 C20 Highlander 1967 C10

05-02-2019, 09:13 PM	#5
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Wheeler dealers show c10 I noticed when he went to look at the truck it had a Lug Nut missing on a close up shot.. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

05-03-2019, 12:08 AM	#7
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: Wheeler dealers show c10 I'm looking at the episode and grabbed a screenshot. Looks very similar to my wheels which are a 275/60 R15. Wheeler Dealer c10 My C10 __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

05-03-2019, 08:16 AM	#8
72Cheyenne454 Registered User Join Date: Apr 2007 Location: San Diego Posts: 453	Re: Wheeler dealers show c10 I agree with TA, they look like 275/60-15's on 15x8's. Same set up I ran for years on mine, except I used 15x7 passenger car style beauty rings on my 8" wheels - Attached Images

05-03-2019, 11:02 AM	#9
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 2,973	Re: Wheeler dealers show c10 As a side note, I liked the show more when Ed China was the mechanic.

05-03-2019, 11:09 AM	#10
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,108	Re: Wheeler dealers show c10 255/60 front and 175/60's rear on 8" wheels. Trim rings from an S-10. Been running this set up for 25 years. Attached Images __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

05-03-2019, 11:51 AM	#12
72hugger Registered User Join Date: Jan 2002 Location: NC Posts: 130	Re: Wheeler dealers show c10 Can a 700r4 be setup like they did? with no lock up switch etc

05-03-2019, 12:57 PM	#13
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,291	Re: Wheeler dealers show c10 The show lost me when Ed left. Can’t handle either of these guys in America. I did enjoy it when in England. Can’t believe they couldn’t find an American to work on American iron ? __________________ 71 C-20 07 Magnum RT AWD

05-03-2019, 01:06 PM	#14
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Wheeler dealers show c10 looks like 255-70-15 from the first pic __________________ 1967custom

05-03-2019, 03:37 PM	#15
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Re: Wheeler dealers show c10 Cool. good info here as always. thanks! Mark __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

05-03-2019, 08:19 PM	#17
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,010	Re: Wheeler dealers show c10 . This was his version of events that transpired to separate him from the show 2 years ago... https://www.youtube.com/watch?v=8IB15T1LYiY ...Since then he may have divulged more info but that's enough for me. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

05-03-2019, 08:34 PM	#18
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Wheeler dealers show c10 I've never heard of him ,or the show ... __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-03-2019, 09:00 PM	#19
mikeshome Registered User Join Date: Jul 2013 Location: Mount Albert.Ontario Posts: 119	Re: Wheeler dealers show c10 I like my TAs,Plus the previous owner added the spinners, Attached Images



Register or Log In To remove these advertisements.

05-04-2019, 06:33 AM	#20
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Wheeler dealers show c10 T/A's for me - 275's in back ans 235's out in front Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

05-10-2019, 04:57 AM	#21
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: Wheeler dealers show c10 Don’t believe a word they say they are English �� I watched a couple of episodes. Is this the show where they buy a car do 5k of repair work and say they made a profit of 750 quid? Nice to see they did a c10 episode though I’m going to look out for that ��

05-10-2019, 09:31 AM	#22
tristan Registered User Join Date: Sep 2013 Location: Western PA Posts: 1,295	Re: Wheeler dealers show c10 Can't fault the new guy's taste in women.

05-10-2019, 10:40 AM	#23
Minkota Registered User Join Date: Jun 2016 Location: West Palm Beach, Florida Posts: 295	Re: Wheeler dealers show c10 any chance the person that bought that truck is on this forum? chime in if you are....

Register or Log In To remove these advertisements.