1972 Chevy Cheyenne 3/4 4x4 Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy1TonFun · 10-10-2007, 06:10 PM

This is my first off frame restoration.

The List:

337ci Small Block Chevy (327 Bored 60 over)
91/2:1 Compression
TRW Pistons
Crower Cam
Edlebrock Intake
Holly Street 670cfm Carb
GM Performance double hump heads
MSD Ignition HEI Distribitor
MSD 8mm wires
FlowTech Headers

Rebuilt Turbo 350 with Stage 2 Shift Kit
2200 RPM Stall Torque Convertor

NP205 Transfer Case

Front: Dana 44 with Splicer Hubs

Rear: Eaton 5002

Custom 12" Lift

39.5 IROK Swampers on M/T Wheels

Before Pictures:

So far we have removed the orignal 350ci and turbo 350 and body.

I have been working a lot on body work. I have coated the frame with a 3M undercoating. I just started on primering the cab.

I will have pictures up soon after I finish spraying the primer. For now here are the pictures of the 337.

10-10-2007, 06:10 PM	#1
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	1972 Chevy Cheyenne 3/4 4x4 Project This is my first off frame restoration. The List: 337ci Small Block Chevy (327 Bored 60 over) 91/2:1 Compression TRW Pistons Crower Cam Edlebrock Intake Holly Street 670cfm Carb GM Performance double hump heads MSD Ignition HEI Distribitor MSD 8mm wires FlowTech Headers Rebuilt Turbo 350 with Stage 2 Shift Kit 2200 RPM Stall Torque Convertor NP205 Transfer Case Front: Dana 44 with Splicer Hubs Rear: Eaton 5002 Custom 12" Lift 39.5 IROK Swampers on M/T Wheels Before Pictures: So far we have removed the orignal 350ci and turbo 350 and body. I have been working a lot on body work. I have coated the frame with a 3M undercoating. I just started on primering the cab. I will have pictures up soon after I finish spraying the primer. For now here are the pictures of the 337. Last edited by Chevy1TonFun; 11-24-2007 at 05:27 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.