The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-06-2008, 07:57 PM   #1
xDiesel
Registered User
 
xDiesel's Avatar
 
Join Date: Jun 2006
Location: Janesville, WI
Posts: 13
Oil pressure gauge help?

My 2004 GMC Sierra is having an oil pressure gauge issue. Its the 5.3L motor and the oil pressure gauge will read 40 psi one day, then the next it will go all the way up until it can't go anymore. Then a couple days later it will be fine again. When it does go up, it will act normal, just in a different spot. For instance, it will display 80psi at idle, then it will go up with the increased rpms, and go back down and read 80 at idle. If i give it some gas and let it rev up higher, it will then drop the idle pressure slightly, bringing it closer to 40 at idle. It seems like the actual pressure is fine, and there are no check engine lights at all and no noises indicating low/no pressure. It doesn't knock or tick at all. Could it be the sending unit or the gauge itself? Its really confusing me, any help or advice would be appreciated. Thanks.
__________________
__________________________________
1969 GMC 3/4 Ton 4x4 - 350 4-Speed
2004 GMC Sierra 1500 4x4 - 5.3L Auto
xDiesel is offline   Reply With Quote
Old 07-07-2008, 07:01 AM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,673
Re: Oil pressure gauge help?

I helped a friend with his GMC that had a possessed oil pressure gauge and we swapped out the sensor for it and things seemed to be normal after that. Off the top of my head I can't remember where the sensor is on the 5.3. But I suspect it is the sensor or the connection for the sensor is flaky.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 07-07-2008, 03:52 PM   #3
xDiesel
Registered User
 
xDiesel's Avatar
 
Join Date: Jun 2006
Location: Janesville, WI
Posts: 13
Re: Oil pressure gauge help?

Ok, well i will try taking it off and cleaning it and the connector and see if it helps. Otherwise I'll just replace it. Thanks for the input.
__________________
__________________________________
1969 GMC 3/4 Ton 4x4 - 350 4-Speed
2004 GMC Sierra 1500 4x4 - 5.3L Auto
xDiesel is offline   Reply With Quote
Old 07-07-2008, 04:53 PM   #4
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,673
Re: Oil pressure gauge help?

While your checking the connection, look to make sure the wire for it is not touching anything (ie burned thru, shorting ect)
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com