Info on wood grain door panel inserts/Jerry Brown - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 11-26-2018, 01:48 PM

Anyone here have any info on these or Jerry Brown? There are a couple of very,very small dings and one very small blemish.

**hooverfish** · 11-26-2018, 02:01 PM

Jerry Brown was owner of The Truck Shop in Crossville Tn.
They restored 67-72 trucks to a very high standard. Not sure if he is still around. I wouldn't think his name on them would increase the value, all about the condition for me. I'm sure others who are more knowledgeable will add their thoughts.

BB72CHEVKT · 11-26-2018, 02:10 PM

Quote:

Originally Posted by hooverfish

Jerry Brown was owner of The Truck Shop in Crossville Tn.
They restored 67-72 trucks to a very high standard. Not sure if he is still around.
I would think your door panels with woodgrain and trim would be worth $200 - $300 since the woodgrain is original and in such good condition. I wouldn't think his name on them would increase the value, all about the condition for me. I'm sure others who are more knowledgeable will add their thoughts.

The black door panels themselves are not NOS but very close. They are the nicest original set I have seen.

**special-K** · 11-26-2018, 02:24 PM

Those were done by Gary Terry for Jerry Brown, is what it looks like. Gary is Cheyenne Super Man and he always engraves his restored pieces.

**jocko** · 11-27-2018, 12:28 AM

Quote:

Originally Posted by special-K

Those were done by Gary Terry for Jerry Brown, is what it looks like. Gary is Cheyenne Super Man and he always engraves his restored pieces.

Bingo! Gary is about the highest quality I've found to date on woodgrain parts. I've purchased a few things from him and they worth the price of admission. I need to go check for signatures!

BB72CHEVKT · 11-27-2018, 06:42 PM

Quote:

Originally Posted by special-K

Those were done by Gary Terry for Jerry Brown, is what it looks like. Gary is Cheyenne Super Man and he always engraves his restored pieces.

Quote:

Originally Posted by jocko

Bingo! Gary is about the highest quality I've found to date on woodgrain parts. I've purchased a few things from him and they worth the price of admission. I need to go check for signatures!

Thanks guys.

**CS1972** · 01-24-2021, 11:54 PM

Hello everyone, I don't like to start new threads if I can find one to continue on with and this one is it.

I'm installing my new "Cheyenne Superman" wood grain inserts. I already installed the dash cluster, so all I have left is the glove box. The pictures below is the originals and the new ones, side by side. And if you're wondering, yes, I do have 2 sets of factory olive green door panels.

**Ol Blue K20** · 01-25-2021, 07:32 AM

Do they have signatures on them?

**CS1972** · 01-25-2021, 09:59 AM

No signatures, but I know they're from him because we talked numerous times. You get charged $100 until you send him "cores", then you get a $100 refund.

**special-K** · 01-25-2021, 11:17 PM

Those look nice. I have some dash pieces he did in my '72. Steering column, too.

**atog** · 01-27-2021, 01:24 AM

Gary did all the Woodgrain door panels for jerry. People would send them to jerry or order them from jerry thinking he did them. I think it was just a way for him and Gary to poke fun at each other. Later they were shipped from Gary’s place. Him and jerry had a guy reproduce the metal panels years ago then Gary installed the Woodgrain. There is a few board members that can verify this as it happened to them. Looks like Gary signed Jerry’s name

best view · 07-12-2021, 09:21 PM

Is Superman still doing these

11-26-2018, 01:48 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Info on wood grain door panel inserts/Jerry Brown Anyone here have any info on these or Jerry Brown? There are a couple of very,very small dings and one very small blemish. Attached Images __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by special-K; 01-27-2021 at 06:55 AM. Reason: add info

11-26-2018, 02:01 PM	#2
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,112	Re: Info on wood grain door panel inserts Jerry Brown was owner of The Truck Shop in Crossville Tn. They restored 67-72 trucks to a very high standard. Not sure if he is still around. I wouldn't think his name on them would increase the value, all about the condition for me. I'm sure others who are more knowledgeable will add their thoughts. __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job" Last edited by special-K; 01-27-2021 at 06:56 AM.

11-26-2018, 02:24 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Info on wood grain door panel inserts/Jerry Brown Those were done by Gary Terry for Jerry Brown, is what it looks like. Gary is Cheyenne Super Man and he always engraves his restored pieces. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-27-2021 at 06:58 AM.

01-24-2021, 11:54 PM	#7
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: Info on wood grain door panel inserts/Jerry Brown Hello everyone, I don't like to start new threads if I can find one to continue on with and this one is it. I'm installing my new "Cheyenne Superman" wood grain inserts. I already installed the dash cluster, so all I have left is the glove box. The pictures below is the originals and the new ones, side by side. And if you're wondering, yes, I do have 2 sets of factory olive green door panels. Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-25-2021, 07:32 AM	#8
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Info on wood grain door panel inserts/Jerry Brown Do they have signatures on them? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

01-25-2021, 09:59 AM	#9
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: Info on wood grain door panel inserts/Jerry Brown No signatures, but I know they're from him because we talked numerous times. You get charged $100 until you send him "cores", then you get a $100 refund. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-25-2021, 11:17 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Info on wood grain door panel inserts/Jerry Brown Those look nice. I have some dash pieces he did in my '72. Steering column, too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-25-2021 at 11:50 PM.

01-27-2021, 01:24 AM	#11
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,526	Re: Info on wood grain door panel inserts/Jerry Brown Gary did all the Woodgrain door panels for jerry. People would send them to jerry or order them from jerry thinking he did them. I think it was just a way for him and Gary to poke fun at each other. Later they were shipped from Gary’s place. Him and jerry had a guy reproduce the metal panels years ago then Gary installed the Woodgrain. There is a few board members that can verify this as it happened to them. Looks like Gary signed Jerry’s name Last edited by atog; 01-27-2021 at 01:31 AM.

07-12-2021, 09:21 PM	#12
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 1,985	Re: Info on wood grain door panel inserts/Jerry Brown Is Superman still doing these



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.