Project 7deuce - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tantrumpipeline · 07-11-2011, 02:22 PM

looking good, I don't get why people hacked the doors on so many of the trucks so poorly

**FRENCHBLUE72** · 07-11-2011, 09:21 PM

Well sam hopefully it will get running soon...

New pads installed as brakes are my next project.... And some misc body work pics..

**FRENCHBLUE72** · 07-11-2011, 09:23 PM

Quote:

Originally Posted by hbchevy

Are you getting rid of all the seems and rough edges? Going completely smooth?
Posted via Mobile Device

I am not going totally smooth im gonna throw the rear trim on around the taillights and gate..

**FRENCHBLUE72** · 07-12-2011, 09:31 PM

Shooting for this look on the rear.. I would like to run the Marquez taillights and reverse lights however.. Does anyone have any ideas on filling in the missing spots between the taillight bezels and tailgate trim???My tailgate is welded up and I think the trim maybe an eyesore with the gaps?? Feed back would be great..Btw my tailgate will still have the chevrolet letters across the back..

tantrumpipeline · 07-12-2011, 09:49 PM

will look good, but myself with the Marquez billet tails it would look just as good without any trim and save you having to weld and get re finished

VA72C10 · 07-12-2011, 09:50 PM

so are you running the outer trim and the inner billet bezels? Have you already finished the gate? Is the recessed area filled in? If not, I'd center the lettering within the upper and lower trim.

Slick67 · 07-12-2011, 10:36 PM

That looks very clean and classy. Definetely a "less is more" statement for sure!!!!

**FRENCHBLUE72** · 07-12-2011, 10:53 PM

The letters and indentation will remain..

**FRENCHBLUE72** · 07-13-2011, 12:02 AM

More work today lots of body work on small dings no pics of those.. I did manage to finish the roof seam and picked up some shopline epoxy and another gallon of frenchblue

**FRENCHBLUE72** · 07-13-2011, 12:06 AM

Few more.....Hope to have the truck all in sealer by the weekend of the 22nd lots of body work to do between now and then..

Hooney72 · 07-13-2011, 12:14 AM

Nice work Did you use two bottom trim pieces on the tailgat that looks so clean

**FRENCHBLUE72** · 07-13-2011, 12:15 AM

That is the plan how ever that nice tailgate with the trim I posted is not mine its apic I stole from this board..I already have 2 new lower trim pieces just need the taillight pieces..

Hooney72 · 07-13-2011, 12:19 AM

Oh I see that sure looks good I might have to do that on mine

Hooney72 · 07-13-2011, 12:23 AM

Oh you welded your tailgate closed to bad you couldnt make a seamless trim that would be cool

**67cheby** · 07-13-2011, 10:01 AM

Looking good great progress

Slick67 · 07-13-2011, 12:55 PM

What exactly is that drawn around the word "bulge"?????

**67cheby** · 07-13-2011, 12:57 PM

if i was guessing......it looks like one of my favorite aftermarket "augmented" parts !!

tantrumpipeline · 07-13-2011, 02:40 PM

hahaha I somehow overlooked that drawing

**FRENCHBLUE72** · 07-13-2011, 06:33 PM

I thought those and trucks went together?????HAHAHHAHHAHAHAHA

67chevy1series · 07-13-2011, 09:41 PM

Slick67 · 07-13-2011, 10:34 PM

Quote:

Originally Posted by FRENCHBLUE72

I thought those and trucks went together?????HAHAHHAHHAHAHAHA

They do. Four headlights!!

slammed427 · 08-12-2011, 09:46 PM

Isn't Hot August Nights this weekend? Did you make it?

**FRENCHBLUE72** · 08-13-2011, 12:38 PM

Quote:

Originally Posted by slammed427

Isn't Hot August Nights this weekend? Did you make it?

Its not 2012 yet and yes hot august nights is this weekend...

slammed427 · 08-23-2011, 09:02 PM

Yeah I don't know why I read that as 2011, but apparently I did. I'm hoping to roll my 74 square on the Powertour in 2012, since I don't think the squares are welcome at Hot August Nights yet.

She's comin along man! Almost makes me want to build a 67-72

**FRENCHBLUE72** · 09-02-2011, 09:28 AM

Been busy on the truck and some other misc projects and heres some pics....Got my new bed end cap installed just needs to be welded together it ook forever to get all the body lines straight...Next work will be getting the crease out of the bedside and then on to the back cab wall that was pushed in.. Next time Im just going to get a new bedside as it would have been a whole lot easier.

07-11-2011, 02:22 PM	#226
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Project 7deuce looking good, I don't get why people hacked the doors on so many of the trucks so poorly __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

07-11-2011, 09:21 PM	#227
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce Well sam hopefully it will get running soon... New pads installed as brakes are my next project.... And some misc body work pics.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-12-2011, 09:31 PM	#229
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce Shooting for this look on the rear.. I would like to run the Marquez taillights and reverse lights however.. Does anyone have any ideas on filling in the missing spots between the taillight bezels and tailgate trim???My tailgate is welded up and I think the trim maybe an eyesore with the gaps?? Feed back would be great..Btw my tailgate will still have the chevrolet letters across the back.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-12-2011, 09:49 PM	#230
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Project 7deuce will look good, but myself with the Marquez billet tails it would look just as good without any trim and save you having to weld and get re finished __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

07-12-2011, 09:50 PM	#231
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 7deuce so are you running the outer trim and the inner billet bezels? Have you already finished the gate? Is the recessed area filled in? If not, I'd center the lettering within the upper and lower trim. __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-12-2011, 10:36 PM	#232
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 7deuce That looks very clean and classy. Definetely a "less is more" statement for sure!!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-12-2011, 10:53 PM	#233
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce The letters and indentation will remain.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-13-2011, 12:02 AM	#234
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce More work today lots of body work on small dings no pics of those.. I did manage to finish the roof seam and picked up some shopline epoxy and another gallon of frenchblue Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-13-2011, 12:06 AM	#235
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce Few more.....Hope to have the truck all in sealer by the weekend of the 22nd lots of body work to do between now and then.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-13-2011, 12:14 AM	#236
Hooney72 Registered User Join Date: Jun 2011 Location: Eagle mountain, Utah Posts: 7	Re: Project 7deuce Nice work Did you use two bottom trim pieces on the tailgat that looks so clean

07-13-2011, 12:15 AM	#237
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce That is the plan how ever that nice tailgate with the trim I posted is not mine its apic I stole from this board..I already have 2 new lower trim pieces just need the taillight pieces.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-13-2011, 12:19 AM	#238
Hooney72 Registered User Join Date: Jun 2011 Location: Eagle mountain, Utah Posts: 7	Re: Project 7deuce Oh I see that sure looks good I might have to do that on mine

07-13-2011, 12:23 AM	#239
Hooney72 Registered User Join Date: Jun 2011 Location: Eagle mountain, Utah Posts: 7	Re: Project 7deuce Oh you welded your tailgate closed to bad you couldnt make a seamless trim that would be cool

07-13-2011, 10:01 AM	#240
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project 7deuce Looking good great progress __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-13-2011, 12:55 PM	#241
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 7deuce What exactly is that drawn around the word "bulge"????? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"



Register or Log In To remove these advertisements.

07-13-2011, 12:57 PM	#242
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project 7deuce if i was guessing......it looks like one of my favorite aftermarket "augmented" parts !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-13-2011, 02:40 PM	#243
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Project 7deuce hahaha I somehow overlooked that drawing __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

07-13-2011, 06:33 PM	#244
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce I thought those and trucks went together?????HAHAHHAHHAHAHAHA __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-13-2011, 09:41 PM	#245
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 7deuce

08-12-2011, 09:46 PM	#247
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: Project 7deuce Isn't Hot August Nights this weekend? Did you make it? __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

08-23-2011, 09:02 PM	#249
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: Project 7deuce Yeah I don't know why I read that as 2011, but apparently I did. I'm hoping to roll my 74 square on the Powertour in 2012, since I don't think the squares are welcome at Hot August Nights yet. She's comin along man! Almost makes me want to build a 67-72 __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

09-02-2011, 09:28 AM	#250
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project 7deuce Been busy on the truck and some other misc projects and heres some pics....Got my new bed end cap installed just needs to be welded together it ook forever to get all the body lines straight...Next work will be getting the crease out of the bedside and then on to the back cab wall that was pushed in.. Next time Im just going to get a new bedside as it would have been a whole lot easier. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.