72 Suburban parts wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zeusflash · 02-06-2005, 02:40 PM

My 72 3/4 ton 4x4 Burb needs parts.
Complete set of upper moldings for clams shell doors
Right side lower molding behind third door
Left side lower molding behind rear wheel
Right armrest assembly for rear seat
And of course the ever elusive tailgate emblem
Also interested in leads on narrow 2nd seat and rear seat

ole yeller · 02-06-2005, 03:40 PM

I believe I have a full upper set of trim in good condition. PM me if you are interested.

bagged91 · 02-06-2005, 11:23 PM

The moulding behind the 3rd door is the same as the moulding for the LEFT front fender behind the wheel arch...

zeusflash · 02-06-2005, 11:36 PM

Thanks for the info,I have a couple of those laying around here someware. Hope their not rights when I find them!

68plus4sub · 02-08-2005, 01:05 AM

I have a second narrow seat, and know of some other seat sets, but they are in the Portland area. Let me know if you're interested, I can point you in the right direction.

zeusflash · 02-08-2005, 10:18 PM

Thanks for the reply, I will think on that. I wish Portland were closer to Idaho!

68plus4sub · 02-09-2005, 12:23 AM

Idaho is where I got it !!!! Had my bodywork done at Classics By Jaggers (Garden City). They picked up a whole parts rig which had it in there. The third seat was already gone at that point.

Also, I envy you for the trucks in your signature!!!

Later,

Jason

zeusflash · 02-09-2005, 12:56 AM

Thanks for the reply Jason. Blazer is my daily driver, Suburban is the wifes driver and our latest purchase, only owned it 4 months,mechanically awsome, needs paint and interior,originally a California truck with no rust to speak of. Needles to say I love the 67-72 Chevy trucks. The only problem I have with the Suburban is getting my wife to park it long enough so I can work on it!(her first older vehicle)

02-06-2005, 02:40 PM	#1
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	72 Suburban parts wanted My 72 3/4 ton 4x4 Burb needs parts. Complete set of upper moldings for clams shell doors Right side lower molding behind third door Left side lower molding behind rear wheel Right armrest assembly for rear seat And of course the ever elusive tailgate emblem Also interested in leads on narrow 2nd seat and rear seat

02-06-2005, 03:40 PM	#2
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	Upper trim I believe I have a full upper set of trim in good condition. PM me if you are interested.

02-06-2005, 11:23 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	The moulding behind the 3rd door is the same as the moulding for the LEFT front fender behind the wheel arch... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-06-2005, 11:36 PM	#4
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Thanks for the info,I have a couple of those laying around here someware. Hope their not rights when I find them! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-08-2005, 01:05 AM	#5
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	I have a second narrow seat, and know of some other seat sets, but they are in the Portland area. Let me know if you're interested, I can point you in the right direction. __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914

02-08-2005, 10:18 PM	#6
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Rear seats Thanks for the reply, I will think on that. I wish Portland were closer to Idaho! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-09-2005, 12:23 AM	#7
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	Idaho is where I got it !!!! Had my bodywork done at Classics By Jaggers (Garden City). They picked up a whole parts rig which had it in there. The third seat was already gone at that point. Also, I envy you for the trucks in your signature!!! Later, Jason __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914

02-09-2005, 12:56 AM	#8
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Thanks for the reply Jason. Blazer is my daily driver, Suburban is the wifes driver and our latest purchase, only owned it 4 months,mechanically awsome, needs paint and interior,originally a California truck with no rust to speak of. Needles to say I love the 67-72 Chevy trucks. The only problem I have with the Suburban is getting my wife to park it long enough so I can work on it!(her first older vehicle) __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.