The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-05-2018, 09:27 PM   #1
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
1971 2wd Chevy blazer build

Hello Everyone on 67-72 chevytrucks
So I was able to get a real 2wd chevy blazer
Its a 1971

So this is my plan. Tear it all down and start fresh.
Meaning remove all the old paint, body seal, Rust etc

And I have no plans at all to modify the body in any way other than remove the quarter panel marker lights. But I could also leave them. not a real big issue for me.
Oh yes I dont like the rain gutters. So I will be removing them.

Sorry for any typos

And Im open to any ideas any of you may have or suggestions. And if you need me to take a picture to help you in any way just ask me. Give me a couple of days.

So I tore it all down to get it ready for sandblasting.
Both driver and passenger side rockers were rusty.

I also noticed the windshield top header bow was rusty...I drilled out the spot welds and opened it up and yes it was pretty rusty inside.

So I sent that to get sand blasted as well

What I plan on doing to it is this
20s up front
22s in the back<----- front and rear can change as far as size. This is one of the many areas I may be asking for input from all of you...I dont want to modify the body at all

I guess I should stop talking and upload photo's
2wdChevyblazer is offline   Reply With Quote
Old 03-05-2018, 09:56 PM   #2
lks dcvn
Registered User
 
lks dcvn's Avatar
 
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,338
Re: 1971 2wd Chevy blazer build

Congrats on the new blazer! Yes - post up some pictures so we can see what you are working on.
lks dcvn is offline   Reply With Quote
Old 03-05-2018, 10:24 PM   #3
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Here are some pictures..uploading is difficult on my phone...if I did it wrong please let me know the correct way
Attached Images
     
2wdChevyblazer is offline   Reply With Quote
Old 03-05-2018, 10:29 PM   #4
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

I am going to put the 67 front clip.but no raking the windshield is What I meant about modifying the body.
2wdChevyblazer is offline   Reply With Quote
Old 03-05-2018, 10:42 PM   #5
C/10 King
Registered User
 
C/10 King's Avatar
 
Join Date: Feb 2009
Location: A****er, CA
Posts: 5,594
Re: 1971 2wd Chevy blazer build

Hey neighbor, if the rain permits a lot of us C/10 Club member's will be in Pleasanton at the end of the month, there will be a few blazers for some ideas and you are more than welcome to join us!
__________________
C/10 Rene
1966 Short Fleet "The Hag"
1967 CST Short Fleet "Dark Poly"
1971 Short Fleet
1970 Jimmy Custom 2 WD "Golden Ticket"
1972 Blazer 2 WD "Retro Blaze"
C/10 King is offline   Reply With Quote
Old 03-05-2018, 10:57 PM   #6
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Thank You C/10 King
2wdChevyblazer is offline   Reply With Quote
Old 03-05-2018, 11:03 PM   #7
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

So my blazer is almost finished with sandblasting.
Then its off to get the frame powder coated and also the bottom of the blazer shell
2wdChevyblazer is offline   Reply With Quote
Old 03-06-2018, 02:59 AM   #8
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Hello Everyone. I have a question.
I ordered my IFS for the blazer with air bags for the front
Can I Just order airbags for the rear suspension or
Do I have to order something else with it.

Also I am not sure If its ok to list the brands that Im buying for the blazer...can someone give me the yes its ok or no way
Thanks

Last edited by 2wdChevyblazer; 03-06-2018 at 03:01 AM. Reason: I meant to say stock suspension for the rear
2wdChevyblazer is offline   Reply With Quote
Old 03-09-2018, 11:50 PM   #9
Crcrft78
Registered User
 
Crcrft78's Avatar
 
Join Date: Nov 2014
Location: San Francisco CA
Posts: 158
Re: 1971 2wd Chevy blazer build

Welcome nice project.
Crcrft78 is offline   Reply With Quote
Old 03-10-2018, 02:48 AM   #10
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Thanks. Just waiting for sand blasting to be done so I could powder coat the frame and start puting this blazer back together
2wdChevyblazer is offline   Reply With Quote
Old 03-14-2018, 12:42 PM   #11
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Just finished Sand Blasting the Blazer

Now its going to powder coating
Attached Images
     
2wdChevyblazer is offline   Reply With Quote
Old 03-15-2018, 03:01 AM   #12
Crcrft78
Registered User
 
Crcrft78's Avatar
 
Join Date: Nov 2014
Location: San Francisco CA
Posts: 158
Re: 1971 2wd Chevy blazer build

Who did the sand blasting for you?
Crcrft78 is offline   Reply With Quote
Old 03-15-2018, 07:45 PM   #13
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Hi Crcrft78
Myers sandblasting Oakland ca
2wdChevyblazer is offline   Reply With Quote
Old 03-17-2018, 05:42 PM   #14
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Ok as most of you have seen, the driver side quarter panel was done poorly..
So I went online an ordered a new one.. 900.00 is a lot of money
I wanted to use that money for something else. A sandwich, cookies and a few more cookies.

But I did start this build thread wrong, at least a little bit
I purchased this blazer on Craigslist last month . I always wanted a blazer since I was
Very young. So I found one years later.. A bit rougher than I wanted but I didnt want or could even afford one already done for me. I had No plans to tear it down like this

but I should have seen that coming...rust here and there just really got to me.
so I made up my mind to remove everthing that I could and work on it when I can and Ask for Help from anyone that could offer it to me when needed.
2wdChevyblazer is offline   Reply With Quote
Old 03-23-2018, 10:52 PM   #15
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

So I got my blazer back today from powder coating...
The body went for the ride with the chassis because they were both sand blasted at the same time.rain kept me from getting it sooner.

Also this week My Heidts IFS came in and I sent that to get powder coated...for those of you that dont know it comes non painted raw metal.

As you can see in the pictures its powder coated now

I chose a color pretty close to fire engine red...my camera phone setting was set different so the color looks orange..its red..

And the chassis is grey....it looks really good in person
2wdChevyblazer is offline   Reply With Quote
Old 03-23-2018, 11:07 PM   #16
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Here are the photos
Attached Images
    
2wdChevyblazer is offline   Reply With Quote
Old 03-23-2018, 11:10 PM   #17
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Another photo
Attached Images
 
2wdChevyblazer is offline   Reply With Quote
Old 03-23-2018, 11:20 PM   #18
parb
Registered User
 
Join Date: Aug 2017
Location: mountain view, CA
Posts: 361
Re: 1971 2wd Chevy blazer build

Cool!

I'm in mountain view! Mine went in to the body shop on Monday. Paint starts in four weeks!
Doing the work in Reno.
parb is offline   Reply With Quote
Old 03-24-2018, 03:39 AM   #19
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Great post pictures of it..
2wdChevyblazer is offline   Reply With Quote
Old 03-24-2018, 03:42 AM   #20
parb
Registered User
 
Join Date: Aug 2017
Location: mountain view, CA
Posts: 361
Re: 1971 2wd Chevy blazer build

Sure thing. Pics are in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=759763
parb is offline   Reply With Quote
Old 03-24-2018, 05:30 PM   #21
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: 1971 2wd Chevy blazer build

I don't know if you've done this kind of work before or not, but it makes me cringe when I see a Blazer tub off the frame without any kind of bracing done to it, especially one with any amount of rust. Being as you have the rocker panels removed too, this thing is probably trying to fold in on its self. Not trying to be a dick, just letting you know. Even a non rusty one will move more than you think. So, before you start welding in panels on this thing, you need to get the header panel welded back in, get it back on the frame and put the top on it to make sure everything is going to line up properly. There would be nothing worse than putting a new bed side and rockers on it only to find out that the top wont fit. Don't rely on just the fact that you make the doors fit, because they can be made to fit even when the top wont. Good luck with the build.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 03-24-2018, 07:01 PM   #22
lks dcvn
Registered User
 
lks dcvn's Avatar
 
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,338
Re: 1971 2wd Chevy blazer build



At minimum to get everything lined up - replace the body mounts/bolts since the originals are likely shot and install the top to assure you are close to a factory reference point before you start welding in metal. Some people have had to use spreader bars to get the door openings to line up after they dismantle the tub.
lks dcvn is offline   Reply With Quote
Old 03-24-2018, 09:27 PM   #23
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Thank You Ls1nova71 and Iks dcv1 for the heads up..
I did think about putting the top on the blazer before welding in the new quarter panel and also about the body possibly flexing. Other than the windshield bow and rockers this Blazer is Solid

I have 2 tops. One is really nice condition. I have to wait couple more weeks to get the nice one from my other blazer..

Yes I know, Im building 2 blazers at the same time..just doing one post only for this blazer and not the other one....I dont want to come off as a Guy with tons of money, a show off Because I dont have it like that, ..its a long story but my divorce has been very difficult So Im staying busy with work and my Blazers and other projects.. Yes Other projects too.

20 years back I would have been the guy that knows everything.
Now I ask until I get the feedback or help etc that I need.
2wdChevyblazer is offline   Reply With Quote
Old 03-24-2018, 09:30 PM   #24
2wdChevyblazer
Registered User
 
Join Date: Jan 2018
Location: San mateo california
Posts: 51
Re: 1971 2wd Chevy blazer build

Yes I ordered the full body mount bolt kit along with all the sheet metal. and my doors where in good condition...I Just wanted to go in a different direction
2wdChevyblazer is offline   Reply With Quote
Old 03-25-2018, 12:14 AM   #25
badd71
Registered User
 
Join Date: Sep 2007
Location: Benicia, CA
Posts: 128
Re: 1971 2wd Chevy blazer build

The project is moving forward,looks good. I am the guy who bought the doors from your Blazer.
badd71 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com