Wow.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged78 · 08-24-2003, 04:27 PM

This is cool, a board just for Blazers/Jimmys. The only other thing to do is, POST SOME PICS!!!!!
I just need to get some updated pics of my never ending project...
75 2wd Blazer, the only pic I have is from the night I brought it home, it sits in the garage in a thousand pieces and will some day live again.....
So let's see um...

bigblock73 · 08-25-2003, 12:54 PM

here is mine...

bigblock73 · 08-25-2003, 12:55 PM

another...

alf4444 · 08-25-2003, 01:22 PM

Here are the pics of my 78 from when I first got it to almost its current state need to get off my lazy ass and upload some more pics
http://community.webshots.com/album/71212071HTBoyh

**Captkaos** · 08-25-2003, 11:32 PM

Here is my 1978 GMC Jimmy.

1976K5CHALET · 08-26-2003, 02:11 AM

bigblock 73...is that vinyl wood on the side of her/ Never seen that option...aftermarket or is there a rpo listing sticker still on the drivers side fender well??? Would like some pics of this for our web site if its factory...

DW

Tink · 08-26-2003, 06:44 AM

Here's my 76:

bigblock73 · 08-26-2003, 07:39 AM

Doug, yes it is all original. I don't believe there are any fenderwell tags on 73-87's...usually they were on the inside of the glovebox...and mine happens to have been removed at one point in time.

The vinyl woodgrain option was pretty un-common for these trucks...which is exactly why I purchased this one.

Feel free to use these pics, I think I have more at home and can post them if you like.

-Jeff

bagged74 · 08-26-2003, 10:02 AM

I have a 74 GMC jimmy, bagged on 20s. modem is out on home computer. I am posting from work, so no pics today.

later

sameyrasmea72 · 08-26-2003, 02:14 PM

Here's a couple pics of my 1980 silverado after a couple weeks of compounding and polishing. It had been sitting for about ten years and had four rotten tires when I bought it 2 months ago. With some preventitive measures like fuel filter, oil change, thermostat,fulsh, and then some gas it fired right up. I had planed on a least to tune it up, but decided not to for fear I would mess it up. Cold AC with one can of r-12. All original w/53000 well now 55000 original miles.

sameyrasmea72 · 08-26-2003, 02:18 PM

#2

Wasted Income · 09-08-2003, 11:32 AM

Since this is a Jimmy/Blazer 1973 + forum, here's my '94 Yukon (I don't care what GM calls it, It'll always be a jimmy to me...)

Tx Firefighter · 09-11-2003, 12:15 AM

There is not one single bolt, screw, nut, clip, or widget, that I haven't had off this thing. We took it down to the barest of bare and started back together with it. Lot's of work invloved here.

littlebubba · 09-11-2003, 01:12 AM

All nice 2WD's guys! I wish I could find something as nice that wasn't all rusted out or beat up, which is difficult up here in the RUSTBELT. I have a plan, if a can find the right one. GM didn't sell alot of 2 WD's around here, mostly 4X4.

Tx Firefighter · 09-11-2003, 01:18 AM

This is what we started with. Payed 1000 for it with a new dealer installed Goodwrench engine.

leadfoot067 · 09-11-2003, 01:59 AM

heres mine

leadfoot067 · 09-11-2003, 02:00 AM

and another

**raggedjim** · 09-19-2003, 04:27 PM

Here's the 2wd I just sold...

Gregsmx · 09-24-2003, 11:15 PM

Ahhh, finally a message board for us big cab trucks! Here's a pic of project 'Old Blue' 4wd being built as a 2wd project, although I woun't be lowering her. The restoration is being tracked on cardomain.com. Just click on my link below.

**N2TRUX** · 09-24-2003, 11:32 PM

I guess I need to get in on this. I have spent so much time with my 77 lately, the Blazer gets neglected.

Here's what I started with. She's a 1982 C/K 2wd Blazer. From the factory it was equipped with a smog dog 305, a 700r4, and 3.42 gears...

**N2TRUX** · 09-24-2003, 11:45 PM

Here she is with all the badges shaved, a good coat of primer, and some ill fitting 17's I took off my 97 Silverado...

**N2TRUX** · 09-24-2003, 11:51 PM

Here is a rarely posted pic of her wearing 18's and 20's....

mr_mrs_chevy4x4 · 09-26-2003, 02:29 PM

Here are my pics.. too many to list.. too many trucks also.. lol.. enjoy..

http://community.webshots.com/user/ctr_83k5blazer
http://www.rocko.rockcrawler.com/favorite_links.html

Laurana067 · 05-10-2004, 02:25 PM

Here's a pic of my 1978 Jimmy. I'm hoping to have it running right by "california" standards soon. Any ideas or suggestions i'd be glad to hear. I'm new to the site, but hope I can learn some good things here....

Low87 · 05-10-2004, 03:04 PM

Here's my 77 2wd.

08-24-2003, 04:27 PM	#1
bagged78 world class smart ass! Join Date: Jan 2003 Location: Clinton Utah Posts: 335	Wow.. This is cool, a board just for Blazers/Jimmys. The only other thing to do is, POST SOME PICS!!!!! I just need to get some updated pics of my never ending project... 75 2wd Blazer, the only pic I have is from the night I brought it home, it sits in the garage in a thousand pieces and will some day live again..... So let's see um... Attached Images __________________ Aric 75 2WD BLAZER (never ending project) -some day maybe- 02 2500HD CREW CAB 4X (daily drive) -8" lift 37s and 22s- ____ ____________________________

08-25-2003, 12:55 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	another... Attached Images

08-25-2003, 01:22 PM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Here are the pics of my 78 from when I first got it to almost its current state need to get off my lazy ass and upload some more pics http://community.webshots.com/album/71212071HTBoyh __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

08-25-2003, 11:32 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Here is my 1978 GMC Jimmy. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-26-2003, 02:11 AM	#6
1976K5CHALET Senior Member Join Date: Jan 2003 Location: Grand Junction, Colorado Posts: 611	bigblock 73...is that vinyl wood on the side of her/ Never seen that option...aftermarket or is there a rpo listing sticker still on the drivers side fender well??? Would like some pics of this for our web site if its factory... DW __________________ Doug Wright aka K5NUTT over @coloradok5.com Owner of http://groups.yahoo.com/group/ChevyK5BlazerChalets Certified K5 Nut

08-25-2003, 12:54 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	here is mine... Attached Images

08-26-2003, 06:44 AM	#7
Tink Registered User Join Date: May 2002 Location: VA Posts: 1,337	Here's my 76: __________________ 69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list!

08-26-2003, 07:39 AM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Doug, yes it is all original. I don't believe there are any fenderwell tags on 73-87's...usually they were on the inside of the glovebox...and mine happens to have been removed at one point in time. The vinyl woodgrain option was pretty un-common for these trucks...which is exactly why I purchased this one. Feel free to use these pics, I think I have more at home and can post them if you like. -Jeff

08-26-2003, 10:02 AM	#9
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	blazer I have a 74 GMC jimmy, bagged on 20s. modem is out on home computer. I am posting from work, so no pics today. later

08-26-2003, 02:14 PM	#10
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Here's a couple pics of my 1980 silverado after a couple weeks of compounding and polishing. It had been sitting for about ten years and had four rotten tires when I bought it 2 months ago. With some preventitive measures like fuel filter, oil change, thermostat,fulsh, and then some gas it fired right up. I had planed on a least to tune it up, but decided not to for fear I would mess it up. Cold AC with one can of r-12. All original w/53000 well now 55000 original miles. Attached Images

08-26-2003, 02:18 PM	#11
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	#2 Attached Images

09-08-2003, 11:32 AM	#12
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Since this is a Jimmy/Blazer 1973 + forum, here's my '94 Yukon (I don't care what GM calls it, It'll always be a jimmy to me...) __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

09-11-2003, 12:15 AM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	My wife's 77 Blazer There is not one single bolt, screw, nut, clip, or widget, that I haven't had off this thing. We took it down to the barest of bare and started back together with it. Lot's of work invloved here. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin

09-11-2003, 01:12 AM	#14
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Envious! All nice 2WD's guys! I wish I could find something as nice that wasn't all rusted out or beat up, which is difficult up here in the RUSTBELT. I have a plan, if a can find the right one. GM didn't sell alot of 2 WD's around here, mostly 4X4.

09-11-2003, 01:18 AM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	This is what we started with. Payed 1000 for it with a new dealer installed Goodwrench engine. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

09-11-2003, 01:59 AM	#16
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	heres mine Attached Images __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

09-11-2003, 02:00 AM	#17
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	and another Attached Images __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

09-19-2003, 04:27 PM	#18
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,384	Here's the 2wd I just sold... __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd Last edited by raggedjim; 10-21-2009 at 03:11 PM.

09-24-2003, 11:15 PM	#19
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	Ahhh, finally a message board for us big cab trucks! Here's a pic of project 'Old Blue' 4wd being built as a 2wd project, although I woun't be lowering her. The restoration is being tracked on cardomain.com. Just click on my link below. Attached Images __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

09-24-2003, 11:32 PM	#20
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	I guess I need to get in on this. I have spent so much time with my 77 lately, the Blazer gets neglected. Here's what I started with. She's a 1982 C/K 2wd Blazer. From the factory it was equipped with a smog dog 305, a 700r4, and 3.42 gears... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-24-2003, 11:45 PM	#21
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Here she is with all the badges shaved, a good coat of primer, and some ill fitting 17's I took off my 97 Silverado... Attached Images

09-24-2003, 11:51 PM	#22
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Here is a rarely posted pic of her wearing 18's and 20's.... Attached Images

09-26-2003, 02:29 PM	#23
mr_mrs_chevy4x4 Registered User Join Date: Mar 2003 Location: Round Rock, Texas Posts: 15	Here are my pics.. too many to list.. too many trucks also.. lol.. enjoy.. http://community.webshots.com/user/ctr_83k5blazer http://www.rocko.rockcrawler.com/favorite_links.html __________________ The only thing neccessary for evil to triumph, is for the good to do nothing.

05-10-2004, 02:25 PM	#24
Laurana067 Registered User Join Date: May 2004 Posts: 2	Here's a pic of my 1978 Jimmy. I'm hoping to have it running right by "california" standards soon. Any ideas or suggestions i'd be glad to hear. I'm new to the site, but hope I can learn some good things here.... Attached Images Last edited by Laurana067; 05-17-2004 at 11:22 PM.

05-10-2004, 03:04 PM	#25
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Here's my 77 2wd. Attached Images __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

Register or Log In To remove these advertisements.