1974 gmc

[tinker12797]

ok Boys and Girls I have a few blond questions If someone would indulge me please and thank you...

1974 GMC
Can you put a camper on any 1974 GMC or does it have to be a camper special??

If you only have a vin # would the vin tell you if it's a Sierra

Besides the DMV.. I tried them all ready .they dislike me their and car fax doesn't go back further than 1980
Where else could one find any information on a vehicle with only the vin# like owner of the vehicle. Ect.

[Warrens69GMC]

Do you see the SPID in the glove box? what is the emblem above the glove box?

[Gmc.guy]

My trucks are Canadian so they may be different but all the trucks I have had from 73 to about 84 have the spid on the inner fender under the master cylinder. It does not say too much about the gvwr You should have a tag inside the door jamb that shows your weight rating as manufactured. I'll post a pic here right away of my 74 gmc. Yours may be different.

[Gmc.guy]

These are in the driver side door jamb

[Gmc.guy]

Vin plate

[Keith Seymore]

Originally Posted by tinker12797

1974 GMC
Can you put a camper on any 1974 GMC or does it have to be a camper special??

Sure. Just don't overdo it.

Originally Posted by tinker12797

If you only have a vin # would the vin tell you if it's a Sierra

No. There is no coding in the VIN for trim level.

Originally Posted by tinker12797

Where else could one find any information on a vehicle with only the vin# like owner of the vehicle. Ect.

For vehicles manufactured in Canada, or made in the US for Canadian consumption, you can contact GM of Canada and they can provide you with the build content for your specific vehicle.

http://www.vintagevehicleservices.com/options.html

Information for US only vehicles through the GM Heritage Center is available for 1976 and later.

http://www.gmmediaarchive.com/?page=1

You will probably not be able to track down previous owners by the VIN due to privacy laws unless you hire a private investigator.

K

[Gmc.guy]

Is your truck a 3/4 ton or 1/2 ton? Longbed fleet side should fit almost any truck camper but it's the spring capacity that tells you if the truck will carry it safely or not. The model designation likely will not matter,

[Gmc.guy]

Originally Posted by Keith Seymore

Sure. Just don't overdo it.



No. There is no coding in the VIN for trim level.




For vehicles manufactured in Canada, or made in the US for Canadian consumption, you can contact GM of Canada and they can provide you with the build content for your specific vehicle.

http://www.vintagevehicleservices.com/options.html

Information for US only vehicles through the GM Heritage Center is available for 1976 and later.


http://www.gmmediaarchive.com/?page=1
K

Cool. I didn't know that