KS parting out 72 GMC LB BB - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 02-03-2012, 01:16 AM

Did I miss it, or did you have a chance to look at the rear light harness?

**BIGJAKE97** · 02-03-2012, 01:37 AM

i'll take the motor mount towers when you get them off and pending a pic. shipping will be to 94538. no hurry. thanks, jake

**Cash3481** · 02-03-2012, 01:37 AM

Quote:

Originally Posted by wrwelton

I am looking for rear inner bumper brackets

Ill have to look at it tomorrow in the light just came in from tring to get it all weighed and removed. I made a note to check it tomorrow!

**Cash3481** · 02-03-2012, 01:41 AM

Quote:

Originally Posted by Critterman71

are the AC brackets or any of the AC stuff still available. Any seat belts? Thanks

AC Bracket on the valve cover is avaliable, along wit the middle seat belt, retractors are giving me fits to get out. I will try the 4 foot breaker tomorrow.
If they all come out your 1st in line on seat belts.
your 2nd on the ac parts unless DD! passes.
Im posting pics after I catch up on this thread.
Mike

**Cash3481** · 02-03-2012, 01:43 AM

Quote:

Originally Posted by BIGJAKE97

i'll take the motor mount towers when you get them off and pending a pic. shipping will be to 94538. no hurry. thanks, jake

Teeit up requested them but i dont know if he passed yet, Ill wait till tomorrow night and then they are yours if he dosent speak up for them.
Mike

**Cash3481** · 02-03-2012, 02:23 AM

Jimmer 1964: visors and clips are 20 havent got a box for them yet
tinted vent windows are 50 plus shipping.
If you want them both Ill get them in the same box.

Chewychevy: exhaush hangers are going to be a week or so till I get them off and good pics. It has all 4. Ill ship to canada if your paying shipping.

McBassin: Harness info... Gages, A/C, door switches. It has a few issues where wire is smashed comming out of the fuse box. The D/S dome switch has 2 slices (pics). Its all in a Medium Flat rate box if you want it.

HDBOB: gage cluster $20 plus 12.65 shipping pics comming!

DD1: not sure of everyhing you need but look at the pics and we can come up with a price for it all.

Oaklawnboy: $150 for the fender and hate to ship it. Loading Pics now

DaHos: BB manifolds are $125 plus shipping(still on the truck. Pics tomorrow but they are all the same.

Madness big block: WP pully $35 plus shipping. Also Have the Crank pulley if intreasted.

JDPerez1995: ashtray $5 plus shipping but it wont be much I dont think.

68LowBurb: Your up on the BB shroud $85 plus 15.48 shipping. check the pics and let me know!

C1069: Your now 2nd on the BB shroud.

**Cash3481** · 02-03-2012, 02:27 AM

A/C Pics

**Cash3481** · 02-03-2012, 02:29 AM

cheyenne super fender. it was originally green. surface rust isnt as bad as it may seem under the trim by top of fender. small dent on bottom front. very solid fender though IMO.

**Cash3481** · 02-03-2012, 02:33 AM

P/S pump pics, Water pump pic and Crank pully w/third AC pully unless Im mistaken.

**Cash3481** · 02-03-2012, 02:39 AM

A/T brake pedal$35 , gravel pan $30 plus shipping

Taillight harnes firewall to taillights $10 it has a t-tap splice under back of cab that went to ground, not sure why bit it could be removed.

**Cash3481** · 02-03-2012, 02:45 AM

T/H 400 Gas pedal $40 plus shipping

front bumper brackets $35 plus shipping 1 is still on the truck (encapsulated nut broke free) I may get it off tomorrow for a complete set still.

BB high hump $85 plus shipping.

Flat to curve plug $25 plus the ride.

**Cash3481** · 02-03-2012, 02:54 AM

HDBOB: cluster pics

mcbassin · 02-03-2012, 09:05 AM

Quote:

McBassin: Harness info... Gages, A/C, door switches. It has a few issues where wire is smashed comming out of the fuse box. The D/S dome switch has 2 slices (pics). Its all in a Medium Flat rate box if you want it.

Mike,
I am mainly interested in the rear harness. But if it's not too high and you want to sell the whole wiring set as a package. How much total shipped? thanks

duallyjams · 02-03-2012, 09:10 AM

If the fan clutch is 18" price shipped to 20751.

**Cash3481** · 02-03-2012, 09:26 AM

Quote:

Originally Posted by mcbassin

Mike,
I am mainly interested in the rear harness. But if it's not too high and you want to sell the whole wiring set as a package. How much total shipped? thanks

I think someone else asked about it. If it was you. $10. Plus shipping. It does have the t-tap splice but should be good with it removed.

Quote:

Originally Posted by duallyjams

If the fan clutch is 18" price shipped to 20751.

Fan measured 19" by my tape. But it's for left handed people. let me know

I'm headed to the Wichita swap meet with the column for a member. Will check back later for anyone else's info.

Mike
Posted via Mobile Device

DD1 · 02-03-2012, 11:37 AM

Quote:

Originally Posted by Cash3481

DD1: not sure of everyhing you need but look at the pics and we can come up with a price for it all.
.

Mike, I am looking at the photos and figuring it out. I will get back to you shortly.

MadnessBigBlock · 02-03-2012, 11:45 AM

How much for the crank pulleys?
How much for the power steering set up?
Did you find the firewall heat shield?
Thanks, Brett
Posted via Mobile Device

DD1 · 02-03-2012, 01:55 PM

Ok, here is a collage of your images. I circled the stuff I need and X'd the stuff I don't need. I am going to PM you about price.

I don't need any of the outside A/C stuff, except for the outside heater box. I forgot that your truck is a Big Block and my engine is a small block.

I still want the cooler bottle and bracket, and dome light.

Thanks!

**Cash3481** · 02-03-2012, 04:00 PM

Quote:

Originally Posted by MadnessBigBlock

How much for the crank pulleys?
How much for the power steering set up?
Did you find the firewall heat shield?
Thanks, Brett
Posted via Mobile Device

75 for both pulleys plus shipping. I Need an answer on the bb stuff as I have a local offer but want to honor you first chance on the pulleys before I sell them to the local guy. No heat shield.

Quote:

Originally Posted by DD1

Ok, here is a collage of your images. I circled the stuff I need and X'd the stuff I don't need. I am going to PM you about price.

I don't need any of the outside A/C stuff, except for the outside heater box. I forgot that your truck is a Big Block and my engine is a small block.

I still want the cooler bottle and bracket, and dome light.

Thanks!

I'll go 100 for everything you asked for plus shipping. If that sounds good I'll get another box to fit it all in and get you a price.
Posted via Mobile Device

**Cash3481** · 02-03-2012, 04:05 PM

Quote:

Originally Posted by Ironhorse

Cash, just checking in on column. Hope to see you at the swap meet Friday or Saturday. Again, will be in Pavillion 1, far south east corner near the roll up door, booth EW-12. Possibly do some horse tradin' or just an outright buy on the column?

Didn't see you but I'll be there in the am again. I went to wrong booth.
Phone didn't get service in the building and it was raining outside. We can cath up tomorrow first thing. Mike
Posted via Mobile Device

**Cash3481** · 02-03-2012, 04:07 PM

Anyone not seriously considering any bb stuff please let me know as I have a local buyer for al of it. I am going to honor everyone here first so please let me know your still interested so I can mail it out.
Mike
Posted via Mobile Device

MadnessBigBlock · 02-03-2012, 04:19 PM

I will let the local guy have the big block stuff as I don't need it right away Thanks!
Posted via Mobile Device

DD1 · 02-03-2012, 04:21 PM

Quote:

Originally Posted by Cash3481

I'll go 100 for everything you asked for plus shipping. If that sounds good I'll get another box to fit it all in and get you a price.
Posted via Mobile Device

$100 sounds good. Let me know what the shipping is when you have a chance, and PM me payment info. Do you use Paypal?

DD1 · 02-03-2012, 05:22 PM

Correct me if I am wrong, but it looks like the heater core is inside the inner heater box on the A/C cab, is that correct? And I am assuming that is b/c there are A/C components in the outer heater box?

Just making sure I understand how it works.

Thanks!

teeitup · 02-03-2012, 05:32 PM

MIke, go ahead and see him the motor stands, I have another truck bought so I don't need 2 sets. Thanks Randy

02-03-2012, 01:16 AM	#76
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: parting out 72 GMC LB BB Did I miss it, or did you have a chance to look at the rear light harness? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-03-2012, 01:37 AM	#77
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 264	Re: parting out 72 GMC LB BB i'll take the motor mount towers when you get them off and pending a pic. shipping will be to 94538. no hurry. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

02-03-2012, 02:23 AM	#81
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Jimmer 1964: visors and clips are 20 havent got a box for them yet tinted vent windows are 50 plus shipping. If you want them both Ill get them in the same box. Chewychevy: exhaush hangers are going to be a week or so till I get them off and good pics. It has all 4. Ill ship to canada if your paying shipping. McBassin: Harness info... Gages, A/C, door switches. It has a few issues where wire is smashed comming out of the fuse box. The D/S dome switch has 2 slices (pics). Its all in a Medium Flat rate box if you want it. HDBOB: gage cluster $20 plus 12.65 shipping pics comming! DD1: not sure of everyhing you need but look at the pics and we can come up with a price for it all. Oaklawnboy: $150 for the fender and hate to ship it. Loading Pics now DaHos: BB manifolds are $125 plus shipping(still on the truck. Pics tomorrow but they are all the same. Madness big block: WP pully $35 plus shipping. Also Have the Crank pulley if intreasted. JDPerez1995: ashtray $5 plus shipping but it wont be much I dont think. 68LowBurb: Your up on the BB shroud $85 plus 15.48 shipping. check the pics and let me know! C1069: Your now 2nd on the BB shroud. Attached Images

02-03-2012, 02:27 AM	#82
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB A/C Pics Attached Images

02-03-2012, 02:29 AM	#83
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB cheyenne super fender. it was originally green. surface rust isnt as bad as it may seem under the trim by top of fender. small dent on bottom front. very solid fender though IMO. Attached Images

02-03-2012, 02:33 AM	#84
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB P/S pump pics, Water pump pic and Crank pully w/third AC pully unless Im mistaken. Attached Images

02-03-2012, 02:39 AM	#85
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB A/T brake pedal$35 , gravel pan $30 plus shipping Taillight harnes firewall to taillights $10 it has a t-tap splice under back of cab that went to ground, not sure why bit it could be removed. Attached Images

02-03-2012, 02:45 AM	#86
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB T/H 400 Gas pedal $40 plus shipping front bumper brackets $35 plus shipping 1 is still on the truck (encapsulated nut broke free) I may get it off tomorrow for a complete set still. BB high hump $85 plus shipping. Flat to curve plug $25 plus the ride. Attached Images Last edited by Cash3481; 02-03-2012 at 02:47 AM. Reason: added details

02-03-2012, 02:54 AM	#87
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB HDBOB: cluster pics Attached Images

02-03-2012, 09:10 AM	#89
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: parting out 72 GMC LB BB If the fan clutch is 18" price shipped to 20751. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-03-2012, 11:45 AM	#92
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: parting out 72 GMC LB BB How much for the crank pulleys? How much for the power steering set up? Did you find the firewall heat shield? Thanks, Brett Posted via Mobile Device

02-03-2012, 01:55 PM	#93
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Ok, here is a collage of your images. I circled the stuff I need and X'd the stuff I don't need. I am going to PM you about price. I don't need any of the outside A/C stuff, except for the outside heater box. I forgot that your truck is a Big Block and my engine is a small block. I still want the cooler bottle and bracket, and dome light. Thanks! Attached Images Last edited by DD1; 02-03-2012 at 01:56 PM. Reason: Forgot to include image

02-03-2012, 04:07 PM	#96
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Anyone not seriously considering any bb stuff please let me know as I have a local buyer for al of it. I am going to honor everyone here first so please let me know your still interested so I can mail it out. Mike Posted via Mobile Device

02-03-2012, 04:19 PM	#97
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: parting out 72 GMC LB BB I will let the local guy have the big block stuff as I don't need it right away Thanks! Posted via Mobile Device

02-03-2012, 05:22 PM	#99
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Correct me if I am wrong, but it looks like the heater core is inside the inner heater box on the A/C cab, is that correct? And I am assuming that is b/c there are A/C components in the outer heater box? Just making sure I understand how it works. Thanks!



Register or Log In To remove these advertisements.

02-03-2012, 05:32 PM	#100
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting out 72 GMC LB BB MIke, go ahead and see him the motor stands, I have another truck bought so I don't need 2 sets. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.