KS Parting a 72 super with tach, tilt, posi - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972 Jimmy · 02-15-2015, 08:26 PM

Quote:

Originally Posted by teeitup

Eric, air cleaner and spacer $35 plus shipping
Thanks Randy

Randy,
I'll take it! My shipping zip is 48623. PM me final cost.
Thanks,
Eric

teeitup · 02-15-2015, 08:50 PM

Paul, it has correct knob, I'll get it out and make sure its all ok

1968aj, let me put a battery in truck and see if radio works

Rick, I will check out trim and bumper and pics and once I get it all off I will get you a total. All the parts you said you wanted are yours pending pics. The headliner would cost me $40 to ship, thats why the price is so high

Kevin, all those parts are yours, I'll get you a total when I get it all off

Eric, air cleaner and spacer is yours, I'll get you a total Mon or Tues

Thanks Randy

1968aj · 02-15-2015, 08:56 PM

Ok let me know. Thanks

swamp rat · 02-15-2015, 09:00 PM

Will you sell the lower alternator bracket that mounts to the head?

**Curtb1971** · 02-15-2015, 09:05 PM

Hey there, is the steering wheel for sale? How much shipped to 80214?
Thanks, Curt

teeitup · 02-15-2015, 09:06 PM

Cash3481, Mike, the local guy passed, I will find out ratio on rear. $300 complete to you

1968aj, sure will

Swamp Rat, sorry only sell in sets. $33 shipped for set

Thanks Randy

nickv6266 · 02-15-2015, 09:22 PM

Randy put me in line for front bumper if 72blue passes and curious how much for seat?

Jake1971 · 02-15-2015, 09:28 PM

Hey Randy, I am searching for:
1. Bench seat in post #3.
2. Three '68-'72 rear tail light harnesses in decent condition (the ones that go from the crossmember to the lights).
3. Firewall insulation pads (left and center ones)
4. Black rubber mat and light blue (522?) carpet.
5. Blue door panels complete with arm rests, wood trim and stainless trim.
6. Middle seat belt pair (blue is preferred but required).
No rush as I am still shopping for my build after 20+ years.

All for my 1971 C10, shipped to 78602.
Thanks again!

teeitup · 02-15-2015, 09:32 PM

Curt, is has quite a few cracks, $12 plus shipping

Nick, your 3rd on bumper, I have 2 guys ahead of you. The seat with brackets is $50

Thanks Randy

nickv6266 · 02-15-2015, 09:33 PM

I'll take seat.

teeitup · 02-15-2015, 09:40 PM

Nick, If Mike buys posi he might haul it back for you or David may be making a trip up here too. Seat is yours. Thanks Randy

swamp rat · 02-15-2015, 09:41 PM

Quote:

Originally Posted by teeitup

Swamp Rat, sorry only sell in sets. $33 shipped for set

Thanks Randy

Set: Upper and lower is fine as long as the lower is in good shape and not so worn the alt would sit crooked. Thanks!

keh27 · 02-15-2015, 09:56 PM

Quote:

Originally Posted by teeitup

Donnie, sorry I don't ship door glass

Kevin, tach setup is yours with wiring. Side markers the front are faded, I think the rears are good, $10 for all. Glove box door is $40. Oil fill tube and grommet and plug, $25. I'll have to check the keys and locks out. I was figuring shipping on tach at $20, so whatever shipping is over that would be added on if you wanted the other parts

1968aj, sorry it won't come out with out breaking tabs

Mike, not sure ratio yet. I have one guy locally that asked about it, so you'd be 2nd

David, $40 your 2nd on it

Eric, air cleaner and spacer $35 plus shipping

Keh27, gas pedal comes with kickdown and whatever wiring and carb bracket. Your 2nd on air cleaner

Thanks Randy

pm me on payment info when we know about the air cleaner

Ugly 61 · 02-15-2015, 09:59 PM

Randy, I don't see that you have sold the rear slider or the door panels. Let me know price on both items. I'd drive down so no shipping
Ugly 61

teeitup · 02-15-2015, 10:17 PM

Swamp Rat, they are yours, i'll get them off this week and make sure they are good

keh27, air cleaners setup is sold to first guy, sorry. I'll get the gas pedal setup out and get with you

Ugly 61, $140 for the panels and slider

Thanks Randy

keh27 · 02-15-2015, 10:19 PM

Quote:

Originally Posted by teeitup

Swamp Rat, they are yours, i'll get them off this week and make sure they are good

keh27, air cleaners setup is sold to first guy, sorry. I'll get the gas pedal setup out and get with you

Ugly 61, $140 for the panels and slider

Thanks Randy

ok thanks

Ugly 61 · 02-15-2015, 10:20 PM

ok I'll take them also price me the bed rail protectors. Likely be next weekend before I can make it down.
Ugly 61

**71blksuper4x4** · 02-15-2015, 10:24 PM

Randy, toolbox area and the back bumper. If you cut up the cab, or have a cab to cut up, I need an area cut out for my crew as well. Trevor

teeitup · 02-15-2015, 10:34 PM

Ugly 61, $20 more for the bed rail protectors. I can be around Sat after 2:00 or late Sun after 4:00. Or I can be around about anytime this week

Trevor, they changed beds, so tool box area is gone, or are you just need that section off bed? Back bumper is $20. I have this cab and 3 others at golf course

Thanks Randy

mx289 · 02-15-2015, 10:41 PM

In line for the manual throttle setup.

Randy,how are the door mirrors ? Price ?

Thanks.

teeitup · 02-15-2015, 10:42 PM

jake1971, Paul, sorry I missed your reply I was replying at same time. I'll look on your list. Sold this seat locally to Nick, sorry. Thanks Randy

**71blksuper4x4** · 02-15-2015, 10:42 PM

Randy, ill definitely take the back bumper and brackets if the come off easy enough. I think I can actually make the piece of floor I need after thinking about it. Toolbox area, I just always see what's available. How awful are the cab doors?

teeitup · 02-15-2015, 10:43 PM

Tom, your 2nd on manual throttle. Door mirrors are sold already, sorry. Thanks Randy

teeitup · 02-15-2015, 10:44 PM

Trevor, bumper is yours. This cab is real rusty, not sure on doors.

Jake1971 · 02-15-2015, 10:48 PM

Quote:

Originally Posted by teeitup

jake1971, Paul, sorry I missed your reply I was replying at same time. I'll look on your list. Sold this seat locally to Nick, sorry. Thanks Randy

Thanks Randy. Nick must have posted while I was compiling my list. Shipping this really nice looking seat would be a killer anyways. No rush, take your time.
I was referring to the door panels on this truck.

02-15-2015, 08:50 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Paul, it has correct knob, I'll get it out and make sure its all ok 1968aj, let me put a battery in truck and see if radio works Rick, I will check out trim and bumper and pics and once I get it all off I will get you a total. All the parts you said you wanted are yours pending pics. The headliner would cost me $40 to ship, thats why the price is so high Kevin, all those parts are yours, I'll get you a total when I get it all off Eric, air cleaner and spacer is yours, I'll get you a total Mon or Tues Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 08:56 PM	#28
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: Parting a 72 super with tach, tilt, posi Ok let me know. Thanks

02-15-2015, 09:00 PM	#29
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 72 super with tach, tilt, posi Will you sell the lower alternator bracket that mounts to the head? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-15-2015, 09:05 PM	#30
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting a 72 super with tach, tilt, posi Hey there, is the steering wheel for sale? How much shipped to 80214? Thanks, Curt

02-15-2015, 09:06 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Cash3481, Mike, the local guy passed, I will find out ratio on rear. $300 complete to you 1968aj, sure will Swamp Rat, sorry only sell in sets. $33 shipped for set Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 09:22 PM	#32
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: Parting a 72 super with tach, tilt, posi Randy put me in line for front bumper if 72blue passes and curious how much for seat?

02-15-2015, 09:28 PM	#33
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting a 72 super with tach, tilt, posi Hey Randy, I am searching for: 1. Bench seat in post #3. 2. Three '68-'72 rear tail light harnesses in decent condition (the ones that go from the crossmember to the lights). 3. Firewall insulation pads (left and center ones) 4. Black rubber mat and light blue (522?) carpet. 5. Blue door panels complete with arm rests, wood trim and stainless trim. 6. Middle seat belt pair (blue is preferred but required). No rush as I am still shopping for my build after 20+ years. All for my 1971 C10, shipped to 78602. Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-15-2015, 09:32 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Curt, is has quite a few cracks, $12 plus shipping Nick, your 3rd on bumper, I have 2 guys ahead of you. The seat with brackets is $50 Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 09:33 PM	#35
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: Parting a 72 super with tach, tilt, posi I'll take seat.

02-15-2015, 09:40 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Nick, If Mike buys posi he might haul it back for you or David may be making a trip up here too. Seat is yours. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 09:59 PM	#39
Ugly 61 Registered User Join Date: Jan 2015 Location: Clyde KS Posts: 91	Re: Parting a 72 super with tach, tilt, posi Randy, I don't see that you have sold the rear slider or the door panels. Let me know price on both items. I'd drive down so no shipping Ugly 61

02-15-2015, 10:17 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Swamp Rat, they are yours, i'll get them off this week and make sure they are good keh27, air cleaners setup is sold to first guy, sorry. I'll get the gas pedal setup out and get with you Ugly 61, $140 for the panels and slider Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 10:20 PM	#42
Ugly 61 Registered User Join Date: Jan 2015 Location: Clyde KS Posts: 91	Re: Parting a 72 super with tach, tilt, posi ok I'll take them also price me the bed rail protectors. Likely be next weekend before I can make it down. Ugly 61

02-15-2015, 10:24 PM	#43
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Parting a 72 super with tach, tilt, posi Randy, toolbox area and the back bumper. If you cut up the cab, or have a cab to cut up, I need an area cut out for my crew as well. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-15-2015, 10:34 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Ugly 61, $20 more for the bed rail protectors. I can be around Sat after 2:00 or late Sun after 4:00. Or I can be around about anytime this week Trevor, they changed beds, so tool box area is gone, or are you just need that section off bed? Back bumper is $20. I have this cab and 3 others at golf course Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-15-2015, 10:41 PM	#45
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: Parting a 72 super with tach, tilt, posi In line for the manual throttle setup. Randy,how are the door mirrors ? Price ? Thanks. __________________ Tom 71 K2500 71 K5 Jimmy

02-15-2015, 10:42 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi jake1971, Paul, sorry I missed your reply I was replying at same time. I'll look on your list. Sold this seat locally to Nick, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 10:43 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Tom, your 2nd on manual throttle. Door mirrors are sold already, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2015, 10:44 PM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Trevor, bumper is yours. This cab is real rusty, not sure on doors. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.