PA So 1 more 72 blazer going under the knife - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-08-2016, 11:59 PM

Hey Pete complete set of fronts may be able to get the rears back will find out tomorrow. Visors didn't sell yet but the member hasn't been on the board since he asked for a quote hopefully all is alright but hate to sell before he at least logs on. Motor is gone it was actually a 400 roller motor that was build and set for 28 years LOL.

**DeadheadNM** · 03-09-2016, 12:14 AM

Quote:

Originally Posted by 1rippen6

Hey Pete complete set of fronts may be able to get the rears back will find out tomorrow. Visors didn't sell yet but the member hasn't been on the board since he asked for a quote hopefully all is alright but hate to sell before he at least logs on. Motor is gone it was actually a 400 roller motor that was build and set for 28 years LOL.

Thanks Dwayne - I'll follow along for updates.

Tumbleweed1C4 · 03-09-2016, 08:33 AM

Thanks Rip, I guess you are right, looks like a choice between cracks on vertical or cracks on sides. I will take number 2, just because it looks like it has a cleaner horn button.

**1rippen6** · 03-09-2016, 08:37 AM

Quote:

Originally Posted by Tumbleweed1C4

Thanks Rip, I guess you are right, looks like a choice between cracks on vertical or cracks on sides. I will take number 2, just because it looks like it has a cleaner horn button.

Ok sounds good I'm sure you gave me your zip will get you a shipping quote tonight.

**1rippen6** · 03-09-2016, 11:14 PM

Quote:

Originally Posted by DeadheadNM

Thanks Dwayne - I'll follow along for updates.

I have a complete set I think the fronts are stained and the chrome on some are not so nice 100 plus shipping for everything it was optioned without a console so the seat belts holders are there also. If I remember correctly the belts in the retractors are fine but can double check.

**DeadheadNM** · 03-10-2016, 12:04 AM

Dwayne - bolts included? Toss in the OEM door panels screws? Total shipped to 87107 please. Thanks Pete

**1rippen6** · 03-10-2016, 11:00 AM

Quote:

Originally Posted by DeadheadNM

Dwayne - bolts included? Toss in the OEM door panels screws? Total shipped to 87107 please. Thanks Pete

Sorry Pete didn't see this sure on the bolts might be 2 missing (the 2 that hold the seat down) only the one door panel had a screw it was rough but if I can find it it's yours. It was odd they look like OEM door panels and only the one had a screw the other panel didn't even have a hole in it. Should fit in a medium flat rate with insurance 15 so total 115 shipped.

**DeadheadNM** · 03-10-2016, 11:49 PM

Payment sent Dwayne - thanks again.

**1rippen6** · 03-11-2016, 08:21 AM

Received and boxed up and will ship today after work sorry couldn't find the door panel screw. I looked in my collect and it appears I don't even have a set for myself now I'm on the screw thanks LOL.

Tumbleweed1C4 · 03-16-2016, 07:16 AM

Got the steering wheel safe and sound. That'll do rip, thanks.

**1rippen6** · 03-16-2016, 07:33 AM

Quote:

Originally Posted by Tumbleweed1C4

Got the steering wheel safe and sound. That'll do rip, thanks.

Good to hear thanks for the update!

**1rippen6** · 03-21-2016, 08:47 PM

Good to hear thanks for the update.

DarkKnightWong · 04-04-2016, 11:03 AM

Hi

Do you have the Gas Pedal Assembly and Cable and Bracket on intake ?

Shipped to 30338

Thanks
Allen

CumminsCustom/20 · 05-21-2016, 12:01 AM

Do you still have the high hump and if so how much to ship to 85929

**19702wdc10** · 05-21-2016, 04:51 PM

Hello.
Did it have a tall transmission dipstick tube, length? for TH350
Would you be willing to sell the stick and tube?
Do you have any pictures.
Thanks
Joe

**1rippen6** · 06-01-2016, 10:18 PM

Quote:

Originally Posted by CumminsCustom/20

Do you still have the high hump and if so how much to ship to 85929

The only high hump I have is a 2wd 1 ton will get you a quote if still interested

CumminsCustom/20 · 06-02-2016, 12:32 AM

Quote:

Originally Posted by 1rippen6

The only high hump I have is a 2wd 1 ton will get you a quote if still interested

No thanks I'm going to pass

**1rippen6** · 06-02-2016, 07:31 AM

Quote:

Originally Posted by CumminsCustom/20

No thanks I'm going to pass

No problem thanks for letting me know.

Another 72 · 06-19-2016, 10:13 PM

I saw that the frame was spoken for, how about the axles?

72ls1blazer · 07-31-2016, 04:01 PM

is the filler neck still available? the gas filler tube from the fender to the gas tank.

**1rippen6** · 07-31-2016, 08:28 PM

Quote:

Originally Posted by 72ls1blazer

is the filler neck still available? the gas filler tube from the fender to the gas tank.

I think I have one let me look tomorrow

**1rippen6** · 08-02-2016, 07:23 AM

Quote:

Originally Posted by 72ls1blazer

is the filler neck still available? the gas filler tube from the fender to the gas tank.

Sorry I don't have any 72 fillers I might have a good 70 or 71 if that helps.

**1rippen6** · 05-21-2016, 05:26 PM

Sold that hump but have another I'm out of town until Tuesday will get you pictures then.

MrGoodpliers · 05-21-2016, 05:50 PM

What about door shims and latch reinforcement plates?

**1rippen6** · 06-01-2016, 10:22 PM

Quote:

Originally Posted by MrGoodpliers

What about door shims and latch reinforcement plates?

I have the shims but none of the reinforcement plates are any good I can get pictures if you like.

03-08-2016, 11:59 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife Hey Pete complete set of fronts may be able to get the rears back will find out tomorrow. Visors didn't sell yet but the member hasn't been on the board since he asked for a quote hopefully all is alright but hate to sell before he at least logs on. Motor is gone it was actually a 400 roller motor that was build and set for 28 years LOL.

03-09-2016, 08:33 AM	#3
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: So 1 more 72 blazer going under the knife Thanks Rip, I guess you are right, looks like a choice between cracks on vertical or cracks on sides. I will take number 2, just because it looks like it has a cleaner horn button. __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

03-10-2016, 12:04 AM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,302	Re: So 1 more 72 blazer going under the knife Dwayne - bolts included? Toss in the OEM door panels screws? Total shipped to 87107 please. Thanks Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-10-2016, 11:49 PM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,302	Re: So 1 more 72 blazer going under the knife Payment sent Dwayne - thanks again. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-11-2016, 08:21 AM	#9
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife Received and boxed up and will ship today after work sorry couldn't find the door panel screw. I looked in my collect and it appears I don't even have a set for myself now I'm on the screw thanks LOL.

03-16-2016, 07:16 AM	#10
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: So 1 more 72 blazer going under the knife Got the steering wheel safe and sound. That'll do rip, thanks. __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

03-21-2016, 08:47 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife Good to hear thanks for the update.

04-04-2016, 11:03 AM	#13
DarkKnightWong Registered User Join Date: Oct 2012 Location: Dunwoody GA Posts: 34	Re: So 1 more 72 blazer going under the knife Hi Do you have the Gas Pedal Assembly and Cable and Bracket on intake ? Shipped to 30338 Thanks Allen

05-21-2016, 12:01 AM	#14
CumminsCustom/20 Registered User Join Date: Apr 2016 Location: Lakeside, arizona Posts: 13	Re: So 1 more 72 blazer going under the knife Do you still have the high hump and if so how much to ship to 85929

05-21-2016, 04:51 PM	#15
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: So 1 more 72 blazer going under the knife Hello. Did it have a tall transmission dipstick tube, length? for TH350 Would you be willing to sell the stick and tube? Do you have any pictures. Thanks Joe

06-19-2016, 10:13 PM	#19
Another 72 Registered User Join Date: Apr 2016 Location: Woodbridge Virginia Posts: 81	Re: So 1 more 72 blazer going under the knife I saw that the frame was spoken for, how about the axles? __________________ Rob "1967 Wanna Be" 1972 K5 Blazer

07-31-2016, 04:01 PM	#20
72ls1blazer Registered User Join Date: Aug 2012 Location: Yuma Posts: 13	Re: So 1 more 72 blazer going under the knife is the filler neck still available? the gas filler tube from the fender to the gas tank.

05-21-2016, 05:26 PM	#23
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife Sold that hump but have another I'm out of town until Tuesday will get you pictures then.

05-21-2016, 05:50 PM	#24
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: So 1 more 72 blazer going under the knife What about door shims and latch reinforcement plates? __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.