KS Pre Valentines 2014 67-72 trucks parts SPECIAL

[karphan]

Randy, I'll still take this gun rack and I posted in your other ad I'll take that gun rack too. PM sent. Thanks, Dan

[Justintime67]

How much you asking for the 3 spoke steering wheel??

[teeitup]

Dan, sounds good

Jusstintime67, I think its sold already

Thanks Randy

[Brave71]

Randy, thanks for the pics .. Let me know how much shipped to 89015 thanks Rick

[teeitup]

Rick, I'm going out there in a bit I'll get you a total. Thanks Randy

[teeitup]

pics of 67-68 steering column, the indicator has a washer under screw and the wiring has been spliced, no shifter but could throw in a 69-72 style, $40 plus shipping

[BKSS67]

Randy,

How much shipped to 95492 for the long retention spring and the 2 clips to secure the spring in the picture below?

Do you have the spring in the picture? The other springs in the picture look a little rough. I need one that isn't damaged

Thanks

[70STOVEBOLT]

Payment sent via paypal for linkage brkt and clamp, and PM sent with shipping address.

Thanks,
Mark

[karphan]

Payment made to you for the gun racks. PM sent too. Thanks, Dan

[teeitup]

Thanks Dan and Mark, I should be able to get your parts in mail this week, Randy

[matt_field]

Is the rubber floor mat still available, what condition is it in? apears decent? thanks!

[teeitup]

Matt, it is decent but I don't know about folding it up in a box and shipping it, let me try it tomorrow and see. The last one I shipped cost like $30 to ship. Thanks Randy

[teeitup]

Justintime67, steering wheel is still for sale $30 plus shipping, it has a bend in it, I tried to get pics but its hard to see. I think it can be straightened when mounted, horn guts come with it. Thanks Randy

[too much stuff]

Will take the 3 lighter set ups as pictured. Thanks.

[Beaumont@]

Payment sent for seatbelts thanks.

[Justintime67]

Originally Posted by teeitup

Justintime67, steering wheel is still for sale $30 plus shipping, it has a bend in it, I tried to get pics but its hard to see. I think it can be straightened when mounted, horn guts come with it. Thanks Randy

How much to ship to 92392??

[teeitup]

UP Grade, cargo light housing and lens and switch and 4 of the plastic deals $20 plus shipping, the best housing I have does have some light pitting on it

67carry-all, I will look

BKSS67, $13 shipped for all that

Clatterville, $20 plus shipping

JIMH2828, the knobs I have are for 4 speeds, I will look on hinge for support bracket and go through your other list and get pics

jimer1964, Thanks, I will look and see condition on door edge guards, most have dings

Daren, wish I could of helped

Trevor, sounds good its yours

1971 cheburban, I have one set of V8 mounts left $15, washer bottle and lid $5, plus shipping, the radio I do not know if it works, I only have 67 knobs for it

Justintime67, $50 shipped

Thanks Randy

[blackbolt]

I will take the a/c balls for sure and the rear bed molding send me a PayPal address and a total please to 77505 thanks

[teeitup]

Eric, I will get them in the mail

Beaumont@, I will ship out this week

blackbolt, I will get a quote Thurs

Thanks, Randy

[UP GRADE]

Hey teeitup how much for these item
1 chrome cargo light housing
2 clear cargo lens
3 (4) of those thing that goes behind the window and door handles
4 are those cargo light switches in post 23 picture 5 on the right side if so I need one

[67carry-all]

Hi Randy - looking for an unbroken set of defroster vents in blue - looked like maybe there was a set in the pics? Thanks, Ben

[JimH2828]

Randy, thank you for the pictures. I'm amazed you can keep up with this thread. I've added to my list......trying to do my part to keep you doing what you do.

Open Items
1) Med blue glove box door $10 - I see the hinge, is the open support bracket and screws there?
2) Tranny dipstick and tube $5 - that dipstick is not as long as I need. Any longer ones? since 4x4 engines sit further back, I'm wondering if 4x4 are longer
3) 4x4 Shift knobs - Blank or 4x4 pattern - I wasn't sure on your response, have any?
4) Brake booster to intake manifold vacuum hard line - any good ones
5) Powerbeam 3 prong headlights
6) 2x headlight buckets - got a pair not rusted much
7) Any Rochester card studs? 6 1/2"
8) Radio deluxe knobs, mount cups, nuts and dials
9) Shift linkage assembly - steering column attach bolt\nut\washer, main linkage, frame mount with pin, spring, bracket to tranny, clips, washers, tranny bracket - I wonder if a 4x4 with TH350 has a longer linkage because the engine thus tranny sit further back.
10) 6x ground straps - any decent one, various lengths to do one truck
11) Duel horn harness 2x
12) What are the black caps in the gas cap picture #21-4 ?
13) Steering column firewall rubber seal and mount bracket #21-3
14) Steering column - green gear indicator #21-3
15) Radiator shroud clip #24-4......do you have 2?
16) Any AC\Heater core mount brackets?.....I think that is the non straight ones, right?
17) Firewall flapper
18) Engine side and Cab side AC\Heater fiberglass boxes #28-2
- I need a good set with no crack, good grain......mostly engine side as mine is cracked
- whatever addition parts you want to throw in......vac ball, etc..


Set Items
1) Greenblack wire with plug $5 - I'll take 2 - $10
2) Radio red wire $5
3) 3 boot rings and boot $25
4) Softray wing windows pair $20
5) 6x 72 door screws $20
6) Short gas filler $20
7) Air cleaner wing nut
8) Coiled oil pressure line $10
9) Pulley $8
10) 2x T-3 three prong bulbs $20
11) E-brake pedal setup $10
12) Kick panel vent I know I have pass side for AC and drivers $15 - I'll take 2 sets if you can come up with another good pair - $30
13) Blazer front to rear wiring harness $5


Thanks
Jim

[1971 cheburban]

I talked to you about motor mounts awhile ago, I need small block mounts, and a single crank pulley, they're tough to find around here in ohio. It's for a 71 chevy c10, short water pump, I bought a 8 inch damper but I think they will all bolt up. And also how much for a washer bottle, no bracket just the bottle and lid, thanks

[teeitup]

Justintime67, I will pm you Thanks

[teeitup]

I got a few pics before my camera died