The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-14-2018, 09:16 PM   #1
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Squarebody 73-87 Brake Upgrade

Just wanted to share my experience in brake upgrades. For the half tons there's a factory brake upgrade available to us. There's a big piston caliper (JB7/JD7 - 13" - 3-5/32" piston diameter) that increases the clamping force by 15% over the standard smaller piston caliper (JB6/JD6 - 11" - 2-15/16" piston diameter). The big caliper showed up in the mid 80s 3/4 ton trucks. It's a bolt on. Starting in 1979, they started using the 10mm banjo bolt. Earlier than that, the banjo bolt was like 7/16". So pre 79 trucks might require a new set of lines coming off the frame to the caliper.

As far as brake pads, I've started to run EBCs Ultimax 2 pads for the D50 GM calipers. These suckers are rated GG friction, which is top notch. They have the cold bite you need in a daily driver. They also have the break in coating that helps get the pads seated to the rotor real nice. I can stand my Blazer, running heavy 35s, on its toes.

If you're running a heavy setup, and you don't want to go hydroboost, this is the ticket.

And please, please follow the break in procedure. Probably the most important aspect of the upgrade.

Last edited by buffydores; 12-15-2018 at 07:41 AM.
buffydores is offline   Reply With Quote
Old 12-15-2018, 08:07 AM   #2
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

Interested. So do these require 1" or 1 1/4" rotors and does your 15" wheels still fit?

Rick
Hammered 77 is offline   Reply With Quote
Old 12-15-2018, 08:11 AM   #3
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

Quote:
Originally Posted by Hammered 77 View Post
Interested. So do these require 1" or 1 1/4" rotors and does your 15" wheels still fit?

Rick
Everything works fine. Same rotors. Bolt on. Just need to consider the brake line change if your lines are pre 1979.

I'm assuming on the wheels though. I'm actually running 16" wheels, but the only difference I can see on the calipers is the larger piston.

Last edited by buffydores; 12-15-2018 at 07:52 PM.
buffydores is offline   Reply With Quote
Old 12-15-2018, 07:41 PM   #4
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

Update: Checked the clearances. No difference. 15s are good to go.
buffydores is offline   Reply With Quote
Old 12-16-2018, 07:26 AM   #5
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

Thanks for checking.
Hammered 77 is offline   Reply With Quote
Old 12-18-2018, 07:45 AM   #6
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

What brakes do you have on the rear axle? Are you still running shoes or did you add disc to the rear?
Hammered 77 is offline   Reply With Quote
Old 12-18-2018, 07:48 AM   #7
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

Still running drums. Most of the work is done on the front end. Not saying upgrades in the back aren't helpful. They just don't move the needle as much.
buffydores is offline   Reply With Quote
Old 12-18-2018, 10:45 AM   #8
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Squarebody 73-87 Brake Upgrade

Quote:
Originally Posted by Hammered 77 View Post
Interested. So do these require 1" or 1 1/4" rotors and does your 15" wheels still fit?

Rick
Quote:
Originally Posted by buffydores View Post
Everything works fine. Same rotors. Bolt on. Just need to consider the brake line change if your lines are pre 1979.

I'm assuming on the wheels though. I'm actually running 16" wheels, but the only difference I can see on the calipers is the larger piston.
The JB7/JD7 calipers require a 1 1/4" thick rotor.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 12-18-2018, 10:49 AM   #9
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

Thanks Karl. I see that factory rotors are 1-1/4". Why would anyone run a 1" rotor?
buffydores is offline   Reply With Quote
Old 12-18-2018, 10:56 AM   #10
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

I don't remember what year it started, but some of the light duty 1/2 tons came with 1" rotors.
Hammered 77 is offline   Reply With Quote
Old 12-18-2018, 10:58 AM   #11
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Squarebody 73-87 Brake Upgrade

Quote:
Originally Posted by buffydores View Post
Thanks Karl. I see that factory rotors are 1-1/4". Why would anyone run a 1" rotor?
At some point GM started putting 1" thick rotors on the trucks as a light duty brake system. I think it was around 1981, I had an '84 that came with a V6 & TH400 that had the light duty brake package. I upgraded to the JB5 system with the 1 1/4" rotors up front (for 2wd, you have to swap the spindles to do this, I did when I put on the dropped spindles) and went with the 2 3/4" wide drums in the rear. Not sure why GM did it, but they did.

SO, if you have the 1" rotors and don't want to replace the spindles (2wd guys) to use the 1 1/4" rotors, then this upgrade is not for you.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 12-20-2018, 07:39 AM   #12
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

aggie 91 what issues (if any) did you run into changing to 2 3/4 brakes in the rear? Any wheel fitment problems? Was it just a matter of changing the brake shoes, drums, and cylinders?

Thanks
Rick
Hammered 77 is offline   Reply With Quote
Old 12-20-2018, 11:59 AM   #13
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Squarebody 73-87 Brake Upgrade

Quote:
Originally Posted by Hammered 77 View Post
aggie 91 what issues (if any) did you run into changing to 2 3/4 brakes in the rear? Any wheel fitment problems? Was it just a matter of changing the brake shoes, drums, and cylinders?

Thanks
Rick
No wheel issues at all.

The brake upgrade requires changing the backing plates. Those are what sets the width of the wider shoes to the inside. The axle placement and the face of the drum (wheel mounting surface) does not change.

Change the backing plates, new shoes, new hardware, new wheel cylinders, and new drums. That's it.

Check out this thread...Title is 12 bolt Drum Brake Upgrade, but same goes for the 10 bolt in these trucks...same parts are used...
http://67-72chevytrucks.com/vboard/s...d.php?t=692672
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square

Last edited by aggie91; 12-20-2018 at 12:03 PM. Reason: added link...
aggie91 is offline   Reply With Quote
Old 12-20-2018, 12:45 PM   #14
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 235
Re: Squarebody 73-87 Brake Upgrade

Thanks, so before I go any further i'll need to find some backing plates.
Hammered 77 is offline   Reply With Quote
Old 12-21-2018, 08:12 AM   #15
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: Squarebody 73-87 Brake Upgrade

This is a cool idea and all, but how would you spec that out at say, O'Reilly's or AZ? Just ask for '77 3/4 ton calipers?
Low Elco is offline   Reply With Quote
Old 12-21-2018, 10:23 AM   #16
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Squarebody 73-87 Brake Upgrade

Here is what you need to tell AZ or O'Reilly:

1985 Chevrolet C20 (3/4 Ton), 2wd, 5.7 engine
Front Calipers for Heavy Duty brake system, 13" rear drums

For reference:
Front Right Caliper is a ACDELCO #18FR649
Front Left Caliper is a ACDELCO #18FR650

These require the 10mm banjo bolt and hose

Ask for the front hoses for a 1985 C10 with the heavy duty brakes.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 12-26-2018, 01:43 PM   #17
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

Such great info. This is gonna be helpful for a lot of folks.
buffydores is offline   Reply With Quote
Old 12-27-2018, 04:32 PM   #18
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,893
Re: Squarebody 73-87 Brake Upgrade

Also..... The 1/2 ton HD drum set-ups are more common under Burbs & Blazers if anyone is searching for the backing plates.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is online now   Reply With Quote
Old 01-03-2019, 01:54 PM   #19
SBTork
Garage wrench
 
SBTork's Avatar
 
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,856
Re: Squarebody 73-87 Brake Upgrade

Great info, thanks for the heads up!!
__________________
-Adam


90 V1500 GMC Suburban 350/700R4/NP241.....
01 Saturn SL1 stock DD.....
SBTork is offline   Reply With Quote
Old 01-03-2019, 03:01 PM   #20
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: Squarebody 73-87 Brake Upgrade

Right on, thanks! Dig this- so I go over to a friend of my kid's shop who is a big 4x guy. We start talking trucks, and I mention this idea. He says, oh yeah, I have a pair on the shelf over there- used them once. You want them? 20 ea, with pads. not only that, but we tore our new truck down, and danged if it doesn't have the big back drums on it! Ha-HA! Gonna be stoppin' good now, fellas! imagine with the Hydroboost!
Low Elco is offline   Reply With Quote
Old 08-01-2019, 01:14 PM   #21
bondobob
Registered User
 
bondobob's Avatar
 
Join Date: Feb 2005
Location: Deep River, Ct
Posts: 135
Re: Squarebody 73-87 Brake Upgrade

OK I get that bigger thicker discs and bigger and wider drums give you more stopping power for hard braking but do I really NEED to do this on my 84 short bed? It will add unsprung weight don't forget. My 82 K10 stops great with the big brake set up (locks the rear under heavy braking) but that's quite a bit heavier. If you guys feel it's definitely worth it on all street trucks I'll do it. I need to buy the correct dropped spindles and all new parts anyways. Looks like the proportioning valve and booster/master all gets changed. Small point: the single booster is better looking than the dual. I'm sure this has been hammered on before so thanks for your patience.
bondobob is offline   Reply With Quote
Old 08-01-2019, 01:23 PM   #22
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,136
Re: Squarebody 73-87 Brake Upgrade

Quote:
Originally Posted by bondobob View Post
OK I get that bigger thicker discs and bigger and wider drums give you more stopping power for hard braking but do I really NEED to do this on my 84 short bed? It will add unsprung weight don't forget. My 82 K10 stops great with the big brake set up (locks the rear under heavy braking) but that's quite a bit heavier. If you guys feel it's definitely worth it on all street trucks I'll do it. I need to buy the correct dropped spindles and all new parts anyways. Looks like the proportioning valve and booster/master all gets changed. Small point: the single booster is better looking than the dual. I'm sure this has been hammered on before so thanks for your patience.
I don't think so.

My '87 was a daily driver for 30 years and was picture perfect in terms of pedal feel/travel/decel, even with all of my commuting, parts chasing, light hauling and trailering.

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 08-01-2019, 03:39 PM   #23
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 755
Re: Squarebody 73-87 Brake Upgrade

I only did it because I'm running 35" tires and needed more clamping force to get full lockup.
buffydores is offline   Reply With Quote
Old 10-10-2019, 03:23 PM   #24
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 870
Re: Squarebody 73-87 Brake Upgrade

Nice info and thread. Are you saying a nice improvement over the original? I'm also running 35's and would be nice to slow it down a bit better.

Thanks for the great info!!

1985 Chevrolet C20 (3/4 Ton), 2wd, 5.7 engine
Front Calipers for Heavy Duty brake system, 13" rear drums

For reference:
Front Right Caliper is a ACDELCO #18FR649
Front Left Caliper is a ACDELCO #18FR650

These require the 10mm banjo bolt and hose

Ask for the front hoses for a 1985 C10 with the heavy duty brakes.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 10-10-2019, 04:13 PM   #25
1968k20
Senior Member
 
1968k20's Avatar
 
Join Date: Dec 2009
Location: Chester,California
Posts: 5,618
Re: Squarebody 73-87 Brake Upgrade

Did you ever find a low-miles Suburban?
__________________
1977 Chevrolet K10 SWB Project 350/4spd/np205
1977 Chevrolet K20 LWB 350/350/203
1991 4Runner 22RE 5 SPD
Yanmar Tractor 3 Cyl Diesel
1968k20 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com