PA Parting out 72 Blazer

[jamesjones]

How are the doors and fenders rust wise?

How much for each and would you be willing to ship them? 92020

[1rippen6]

Originally Posted by jamesjones

How are the doors and fenders rust wise?

How much for each and would you be willing to ship them? 92020

Rough and I will ship but don't think they are worth it can get some pictures if you like

[jamesjones]

Originally Posted by 1rippen6

Rough and I will ship but don't think they are worth it can get some pictures if you like

Bummer. No it's ok. Thanks anyway.

[twp1]

do you still have the passenger latch bracket and the piece that mounts to the floor?

[twp1]

for the front seat! Sorry.

[twp1]

also do you have the linkage for the 4-wheel drive shifter ti the transfer case?

[1rippen6]

Originally Posted by twp1

also do you have the linkage for the 4-wheel drive shifter ti the transfer case?

Sorry for the late response I have 2 different linkages the round one and flat one either one is 25 shipped let me know if interested

[1rippen6]

Funds are on there way for seat brackets may have a transfer case link in my collection will look tomorrow.

[twp1]

if they do not show up let me know! will take them!

[1rippen6]

Originally Posted by twp1

if they do not show up let me know! will take them!

Ok will let you know

[rayray767]

Items received - Headlight switch,Washer fluid bracket
Thanks,
Ray.....

[1rippen6]

Originally Posted by rayray767

Items received - Headlight switch,Washer fluid bracket
Thanks,
Ray.....

Good to hear.

[canter66]

Looking for hardware for sun visors. Do you have still?

[1rippen6]

Originally Posted by canter66

Looking for hardware for sun visors. Do you have still?

Sunvisors sold already with hardware sorry. I have another set of visors saddle but hate to sell the hardware separately.

[canter66]

Originally Posted by 1rippen6

Sunvisors sold already with hardware sorry. I have another set of visors saddle but hate to sell the hardware separately.

How much for the visors and can you post a pic so I can see them?

[Ashlandscott]

Do you have a V8 engine cross member?

[1rippen6]

Originally Posted by Ashlandscott

Do you have a V8 engine cross member?

Yes I do 45 for all three pieces plus shipping. It will be a while until I get that far but I might have a set in storage will look and let you know.

Thanks,
Dwayne

[Ashlandscott]

Just let me know when you can get to it and PM me and I'll get you paid. Thanks I really appreciate it!

[1rippen6]

Originally Posted by Ashlandscott

Just let me know when you can get to it and PM me and I'll get you paid. Thanks I really appreciate it!

Send me your zip and when I find it I will get you a shipping quote when I find it or remove the other one.

[Ashlandscott]

Originally Posted by 1rippen6

Send me your zip and when I find it I will get you a shipping quote when I find it or remove the other one.

Sorry zip 72653
Posted via Mobile Device

[Ashlandscott]

Sold! Thanks.
Have fun with the snow! I've been doing honey do's all day! Just let me know how you want paid and I'll geter done.

[Purple67C10]

I'm interested in the driver's side door latch reinforcement plate and the brass brace above it.
Also interested in the front leaf springs.
Shipped to 53154. Thanks.

[1rippen6]

Originally Posted by Purple67C10

I'm interested in the driver's side door latch reinforcement plate and the brass brace above it.
Also interested in the front leaf springs.
Shipped to 53154. Thanks.

Door reinforcement plates sold but I have some in the storage will see if I have that side. Door you need the brass or the stainless steel? Why I ask is the SS is on the door the brass is on the body. I have a set of front springs will have to get them removed to get you a shipping quote. We got 27+ inches of snow this weekend it will be a couple days until I can do anything.

[Purple67C10]

I found the brass and ss alignment pieces from some one else, but i do need the driver side latch reinforcement plate if you have one.
As for the front leaf springs I'm looking for a set to return my 72' back to the stock ride hight. No rush on any of it as I won't be doing any work on it till spring. PM me with any questions.

[1rippen6]

Originally Posted by Purple67C10

I found the brass and ss alignment pieces from some one else, but i do need the driver side latch reinforcement plate if you have one.
As for the front leaf springs I'm looking for a set to return my 72' back to the stock ride hight. No rush on any of it as I won't be doing any work on it till spring. PM me with any questions.

Here is the plate 25 plus shipping it will be a week or 2 before I can get to the front springs.