The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-14-2002, 07:07 PM   #1
tim m
Registered User
 
Join Date: Mar 2001
Location: Gilbert Az
Posts: 286
Post Wheels

If I want to put a srt of 20 inch wheels on my 71 C10 how wide can I go? What does it mean by back spacing.
__________________
1970 k10
1971 C10
Gilbert Az
tim m is offline   Reply With Quote
Old 04-14-2002, 07:47 PM   #2
Cheyenne Super
Registered User
 
Join Date: Mar 2002
Location: Efland, NC
Posts: 303
Post

Backspacing is the distance from the mounting pad or surface to the inner most edge of the wheel. MiniTruckin has a good article in the current issue about measuring backspacing and should really help in determining the right size. Something else to keep in mind is how much drop you have. The more drop you have the more critical the measurments become. Hope this helps
__________________
1971 Cheyenne Super
Soon to be converted to '68 front clip.
Efland, NC
Cheyenne Super is offline   Reply With Quote
Old 04-15-2002, 10:58 AM   #3
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,911
Post

If your looking to run 20's all around, then 20x8's in front w/5.25 b.spacing. In the rear anything wider than 8's usually means 9.5" minimum. Although a 9.5" wheel will fit the b.spacing will vary according to ride height. On my 67 I have 20x10's w/6" of backspacing. From the front, the wheel has the same spacing as a stock truck ralley & I widened my wheeltubs to accomodate the offset. FYI: this set-up worked great when i swapped it on to my 68 beater(5/7 drop) but on my 67(approx 8/10 drop)the rear b.spacing would work better @ 6.5" because the truck sits so low that the tires are actually rubbing the inside bed wall & I didn't consider this as I was mostly worried about the wheeltubs clearing. Live-n-learn.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 04-15-2002, 11:54 AM   #4
72chevyLWB
Got 20's????
 
72chevyLWB's Avatar
 
Join Date: Oct 2001
Location: Aberdeen SD
Posts: 1,451
Post

I have 5.5 backspace on my 17's and you would not want to go any wider. Its about 1/2 inch from the inner wheel well (in back)

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota


__________________
99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged
02 Sierra Ex-Cab 4wd 2500 HD
The 72 went down the road.
72chevyLWB is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com