The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > Review Board > Vendor Reviews

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-25-2016, 11:39 AM   #1
pdawg
Registered User
 
Join Date: Sep 2012
Location: Calgary, Alberta, Canada
Posts: 92
Herman Headers -69080

FYI- this spring I purchased a set of these headers to install on my ZZ383 crate engine in my '72 C10 Custom Deluxe. I was assured by the Hedman tech. line that there were no fitment issues, so I had them ceramic coated by a local shop that does a great job. The headers slid into place with no problems & all was good until I tried to bolt them up. The clearance was so tight I could not get many of the bolts in the holes, as the 1 3/4" tubes were interfering with the heads. I submitted pictures to Hedman & they were quick to respond & agree that there was an issue with these headers. They offered to clearance them if I sent them back, or exchange them at the parts store for a new set. Since I had invested $240 getting them coated, I decided to try some ARP header bolts ($42). It took an hour & a half but I got the drivers side on with an open end wrench, gradually turning each bolt a fraction at a time. I emailed Hedman back & explained that I was successful, but maybe they could cover the cost of the bolts, which would have been more practical & economic for both of us, given I'm way up in Canada. They would have mist certainly damaged the finish trying to clearance them & then there is the down time & shipping costs - both ways. Their response was to advise me it's not their policy to reimburse customers for these costs. These headers have great clearance for spark plug access & should have been easy to install, if not for this defect in manufacture. I could only get a 1/4" drive 3/8" socket on the four outer bolts. The rest had to slowly get eased in with a wrench. Any lesser quality bolts would have rounded the heads off installing them. So be careful if you purchase Hedmans, as their quality control is lacking - as is their customer relations!
Posted via Mobile Device
pdawg is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com