Started my first frame off - 72 SWB LS1, 6-spd manual - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trkfrk · 08-10-2011, 07:58 PM

Quote:

Originally Posted by 67cheby

could you just switch in the High Hump bolt in part and have the clearance you need ?

67Cheby, That looks like an easy cure.. Did the high hump come in a certain year or transmission option? Thanks for the help!

68 TT · 08-10-2011, 09:34 PM

Quote:

Originally Posted by trkfrk

67Cheby, That looks like an easy cure.. Did the high hump come in a certain year or transmission option? Thanks for the help!

The easiest ones to find are in manual trans trucks but they also came in 4x4's and those trucks with a T-400.

Until last weekend I had an extra one I would have given you. I just put it into my 67.

They aren't too hard to find and tend to run around $40 to $60 in good shape when I have seen them for sale.

A square body truck piece is a whole lot easier to find and fits pretty close but the back end doesn't match up and the lower corners of the front are mismatched a little. With a little fab work you could make one fit if you have a hard time finding a good 67-72 piece.

68 TT · 08-10-2011, 09:40 PM

The T-56 is the same length as the 4L60E so the shifter should be within the high hump tunnel area.

The trans in the pic below is a 4L60E.

The worst thing you would need is an offset shifter handle to push the lever forward away from the front of the seat a little.

**67cheby** · 08-11-2011, 10:32 AM

70shortfleet, has one for sale on the for sale sec $75 shipped, looks nice too

08-10-2011, 09:40 PM	#3
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: Started my first frame off - 72 SWB LS1, 6-spd manual The T-56 is the same length as the 4L60E so the shifter should be within the high hump tunnel area. The trans in the pic below is a 4L60E. The worst thing you would need is an offset shifter handle to push the lever forward away from the front of the seat a little. Attached Images __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

08-11-2011, 10:32 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Started my first frame off - 72 SWB LS1, 6-spd manual 70shortfleet, has one for sale on the for sale sec $75 shipped, looks nice too __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.