IA 1967-71 Doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 01-11-2017, 06:20 PM

I have a pair of empty doors for 1968-1971 trucks that I got from a board member in MN. I know they fit 68-71, not 100% if they are totally correct for 67 and 8s. These doors have no rust through, just surface rust. There are a lot of surface rust spots probably from rock chips from what I can tell. Along the pinch weld is solid. There is some minor bulging in the pinch weld but no soft spots. There are spots on the skin that mirror holes were welded up. The LH door has had a crack repaired below where the upper hinge mounts. The welds need dressed and body worked. The LH one has a dent on the inside above the door panel. There aren't any other big dents in them. A light sand blasting and these will be really nice doors. $250 OBO for the pair. I will ship these through Fastenal or Greyhound at the buyer's expense.

See below. These doors do not fit a 67 unless you use a 67 door handle. Thanks to Cheyenne shortstep for that info.

**Dieselwrencher** · 01-11-2017, 06:24 PM

More pictures of the doors.

**atog** · 01-11-2017, 06:46 PM

Any idea what shipping would be to Ohio 44214

**Dieselwrencher** · 01-12-2017, 05:16 PM

Quote:

Originally Posted by atog

Any idea what shipping would be to Ohio 44214

Would any of these Fastenals be close enough to you? If not, I can get a quote through Greyhound. Ryan.

https://www.google.com/webhp?sourcei...20near%2044214

**atog** · 01-12-2017, 07:09 PM

Yes Wooster is

**atog** · 01-12-2017, 07:28 PM

If you can do 300 shipped I'll take them

cheyenne shortstep · 01-16-2017, 12:48 PM

Just an FYI 67 doors are 1 year only in the outer door handle mounting [there is a plate inside for a straight into handle screw vs. angled to match contour of the door], the outer door handle is 1 yr only as well. As long as you use a 67 outer door handle you are OK. I can provide pics if anyone is interested.

The doors pictured are technically 68-71.

**Dieselwrencher** · 01-16-2017, 04:31 PM

Quote:

Originally Posted by cheyenne shortstep

Just an FYI 67 doors are 1 year only in the outer door handle mounting [there is a plate inside for a straight into handle screw vs. angled to match contour of the door], the outer door handle is 1 yr only as well. As long as you use a 67 outer door handle you are OK. I can provide pics if anyone is interested.

The doors pictured are technically 68-71.

Ok, thanks for that. I do not believe these are 67 doors. But I'll have to check.

**Dieselwrencher** · 01-16-2017, 04:33 PM

Quote:

Originally Posted by atog

Yes Wooster is

Quote:

Originally Posted by atog

If you can do 300 shipped I'll take them

I haven't gotten a response from Fastenal on your shipping quote. I'll let you know when I do.

**atog** · 01-16-2017, 05:09 PM

Thanks gunner

01-11-2017, 06:20 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,133	1968-71 Doors I have a pair of empty doors for 1968-1971 trucks that I got from a board member in MN. I know they fit 68-71, not 100% if they are totally correct for 67 and 8s. These doors have no rust through, just surface rust. There are a lot of surface rust spots probably from rock chips from what I can tell. Along the pinch weld is solid. There is some minor bulging in the pinch weld but no soft spots. There are spots on the skin that mirror holes were welded up. The LH door has had a crack repaired below where the upper hinge mounts. The welds need dressed and body worked. The LH one has a dent on the inside above the door panel. There aren't any other big dents in them. A light sand blasting and these will be really nice doors. $250 OBO for the pair. I will ship these through Fastenal or Greyhound at the buyer's expense. See below. These doors do not fit a 67 unless you use a 67 door handle. Thanks to Cheyenne shortstep for that info. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 01-16-2017 at 04:53 PM.

01-11-2017, 06:24 PM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,133	Re: 1967-71 Doors More pictures of the doors. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-11-2017, 06:46 PM	#3
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,526	Re: 1967-71 Doors Any idea what shipping would be to Ohio 44214

01-12-2017, 07:09 PM	#5
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,526	Re: 1967-71 Doors Yes Wooster is

01-12-2017, 07:28 PM	#6
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,526	Re: 1967-71 Doors If you can do 300 shipped I'll take them

01-16-2017, 12:48 PM	#7
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: 1967-71 Doors Just an FYI 67 doors are 1 year only in the outer door handle mounting [there is a plate inside for a straight into handle screw vs. angled to match contour of the door], the outer door handle is 1 yr only as well. As long as you use a 67 outer door handle you are OK. I can provide pics if anyone is interested. The doors pictured are technically 68-71.

01-16-2017, 05:09 PM	#10
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,526	Re: 1967-71 Doors Thanks gunner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.