OR Serpentine belt conversions

[tll74]

Originally Posted by dbstepside

any pics of a bbc setup, also what style p/s pump comes with this kit? also would you happen to have the air comp. delete pulley if so would setup be less $ without the compressor?

Here's some pics of one of two. They are both the same. The P/S pump is a conventional Saginaw pump with dual return ports. I don't have the delete pulley. I can do 60.00 less if I keep the AC pump. Thanks, Tom

[tll74]

Originally Posted by rushingg149

I'm looking for a set to put on a 1970 Chevy 1 ton with a 396 BB. What do you have that would work?

The kit just pictured would work.

[rushingg149]

Originally Posted by tll74

The kit just pictured would work.

What is the cost for the kit and the shipping to 75428 zip code? Would you please list everthing that is included? Please include payment instructions.

[tll74]

Originally Posted by rushingg149

What is the cost for the kit and the shipping to 75428 zip code? Would you please list everthing that is included? Please include payment instructions.

I'll pull it off and picture it and that will answer what is included. Also I will be able to get shipping cost. Thanks, Tom

[tll74]

Pics of the conversion after pulled off.
rushingg149 shipping is 80.26
dbstepside shipping is 85.36

[dbstepside]

thanks for the shipping quote but i'm gonna have to pass right now in process of trying to buy a 72 burb so out of funds right now. dennis

[mr.wilson]

Do you have any sbc complete kits left? If so are they detailed/natural and what is shipping to 19372?

[tll74]

Originally Posted by mr.wilson

Do you have any sbc complete kits left? If so are they detailed/natural and what is shipping to 19372?

Yes I have some left. Shipping is 78.65. It would be cleaned only. 100.00 extra to disassemble and detail. Thanks, Tom

[70K10Hunter]

Do you have any complete SBC kits left? and shipping to 92065

[tll74]

Originally Posted by 70K10Hunter

Do you have any complete SBC kits left? and shipping to 92065

Yes I do and shipping would be 60.00 to Cali. I can check in the morning for a exact price but 60.00 is going to be very close. Thanks, Tom

[70K10Hunter]

10-4 be waiting for total and payment info.

[SunSoaked]

Originally Posted by 70K10Hunter

10-4 be waiting for total and payment info.

I was going to go this route before stumbling uopn my 91 setup ay a local junkyard. It's a good deal. I have mine on my motor but it wont actually run for awhile. I'll tell you in advance your going to need a new water neck because the angle of the one you have runs the upper radiator hose right into the serp belt.

Good luck

[70K10Hunter]

thanks do you have a part# or a source for the correct neck? or do I buy one for the late model setup?

[70K10Hunter]

Oh' I will be checking my local junkyard too, but these guys are expensive and I can't pull my own parts.

[SunSoaked]

Originally Posted by 70K10Hunter

thanks do you have a part# or a source for the correct neck? or do I buy one for the late model setup?

I meant the neck angles the hose into the back of the alternator. I would assume the late model has the correct angle neck since its still a small block. I didn't even think of it at the time. I'll let you know what I find out. tll74 might know what the fix is?

[tll74]

Originally Posted by 70K10Hunter

10-4 be waiting for total and payment info.

I can get you the water neck to match the serp set up, no extra charge. As mentioned you will need to buy a new water pump. Order one for a 95 C/K 1500 if you want it to have the provision for the return heater hose. If not order it for a 89 C/K 1500. The early pump will give a cleaner look as it doesn't have a port to plug. PM sent
Thanks, Tom

[sduckworth13]

I just bought a serpentine setup. I have a 1981 SBC with the dbl hump heads with the accessory bolt holes. What is the part number for the water pump I need?

Thanks,
Scott

[sduckworth13]

Tom, GATES Part # 43114 Water Pump (Standard); Cast Iron, Reverse Rotation, 2 Outlets, is this the one I need to use. This is the setup I have. part# 101187851 a/c bracket and part# 10118701 alternator bracket.

[tll74]

Originally Posted by sduckworth13

Tom, GATES Part # 43114 Water Pump (Standard); Cast Iron, Reverse Rotation, 2 Outlets, is this the one I need to use. This is the setup I have. part# 101187851 a/c bracket and part# 10118701 alternator bracket.

Sorry for the delay just got back from a 9 day elk hunting trip. Yes, the description sounds correct. Thanks, Tom

[chevy6869]

still have any available? how do you go about the dummy pully for the ac?

[tll74]

Originally Posted by chevy6869

still have any available? how do you go about the dummy pully for the ac?

Yes, I still have some available for both the BBC and SBC. The idler that takes place of the AC pump is a hard find used but is still available new. I can check on the price of the idler and see how it it would afect the cost if your wanting a conversion. Thanks, Tom

[tll74]

ttt...I have 2 sbc kits and 2 bbc kits

[TobyArnot]

Originally Posted by TobyArnot

Hey Tom,

What water pump does this use and can I find it locally? How much wiring trouble to replace old ext. reg. alt? Thanks

.
Well Tom, Some months later, but I think I'm ready. I would like conv. for Small Block with A/C, P/S, Alt. complete, shipped to 29708 ? ? Do you include the late model water neck?
.
Hope I can stand shipping

[dbcampbell3]

I'm interest in a conversion for a small block if one is available.

[dbcampbell3]

PM sent