WTB- 73-87 3/4 or 1 ton 4x4 parts ruck or rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 07-06-2002, 02:18 PM

i need a frame and axles for my project, a72 lwb on a 73-87 frame, anybody have a cheap parts truck? i dontneed the sheetmetal though, jut teh chassis, thanks, sean

BigBlockBurris · 07-07-2002, 10:12 PM

A friend of mine has a 73 3/4 ton 4x4 frame for sale with a 6" lift already installed. He is building a 1 ton crew cab so he is using his axles and bed and he is installing a new lift so he will have a good frame with lift for sale. He also has extra for sale such as 4x4 P/S gear box and other odds and ends for sale also. The truck is located in Charlotte NC and should be available within the next month or so. Let me know if you are interested and I will get a $$$$$$$$$$. Thanks

BBB

>X< · 07-08-2002, 12:40 AM

i might be interested, so its just a frame? no axles, what about springs, if its frame down to teh sprins i might want it, but if its a bare frame i'm not interested, i hope its not that many digits, hahah, let me know, sean

*Fast68Chevy* · 07-18-2002, 01:28 PM

i just drove by a 78 3/4 ton 4x4 with a good running 400 and th400 and snow plow for sale, body is complete scrap, doors rusted out missing metal and caved in, and been sitting in dusty place in a shed or something it looks like, he wants 750 for it, dana44 and 14 bolt ff and 203 case,

meanwhile in same region of town theres a blue 67 shortfleet that a kid my age bought form out of town three years ago and was completely scrap rusted junk and he just stuck some outer rockers and corner skins on it and painted the cab and front and then put in 81-84 four headlamps in the rad support, ruining thre grille in the process, says he didnt liek the round headlights,,,, he didnt finish that mod either, has a fresh built 454 that needs cam and intake and accessories put on and has 5 bolt suspensiion all around and has rust out bad on driver bed wheel arch opening and in tail of gloor of bed, he wants 2,000,
he wont get that much, theres no way...

Big-Blockman · 07-23-2002, 10:12 PM

I have a complete 3/4 ton 4x4 frame, axles, TH350 (recently rebuilt) transfer case. I'm in Baltimore MD, can arrange delivery, $1000.00. complete.

Blue_71 · 07-28-2002, 01:46 AM

just curious, but you do know that a 67-72 lwb is 127", while a 73-87 is 131.5 inches, right?

faokla · 08-24-2002, 05:04 PM

I got some 3/4 4x4 for parts email me as to what you want got 350 203 , 465 205 44 14 ff complete 1973 for parts in Okla

*Fast68Chevy* · 08-26-2002, 02:28 AM

http://67-72chevytrucks.com/vboard/s...012#post142012

also maybe gonna see about what appears to be an '81-'84 or so 4x4 shortfleet pickup- sitting in weeds now behind an empty house locally- with rusty body, of course, was parked there and apparently abandoned for at least three months now, if not even longer,

maybe its got something i want or need(good engine)

07-06-2002, 02:18 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	WTB- 73-87 3/4 or 1 ton 4x4 parts ruck or rolling chassis i need a frame and axles for my project, a72 lwb on a 73-87 frame, anybody have a cheap parts truck? i dontneed the sheetmetal though, jut teh chassis, thanks, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

07-07-2002, 10:12 PM	#2
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Frame A friend of mine has a 73 3/4 ton 4x4 frame for sale with a 6" lift already installed. He is building a 1 ton crew cab so he is using his axles and bed and he is installing a new lift so he will have a good frame with lift for sale. He also has extra for sale such as 4x4 P/S gear box and other odds and ends for sale also. The truck is located in Charlotte NC and should be available within the next month or so. Let me know if you are interested and I will get a $$$$$$$$$$. Thanks BBB

07-08-2002, 12:40 AM	#3
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	i might be interested, so its just a frame? no axles, what about springs, if its frame down to teh sprins i might want it, but if its a bare frame i'm not interested, i hope its not that many digits, hahah, let me know, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

07-18-2002, 01:28 PM	#4
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	i just drove by a 78 3/4 ton 4x4 with a good running 400 and th400 and snow plow for sale, body is complete scrap, doors rusted out missing metal and caved in, and been sitting in dusty place in a shed or something it looks like, he wants 750 for it, dana44 and 14 bolt ff and 203 case, meanwhile in same region of town theres a blue 67 shortfleet that a kid my age bought form out of town three years ago and was completely scrap rusted junk and he just stuck some outer rockers and corner skins on it and painted the cab and front and then put in 81-84 four headlamps in the rad support, ruining thre grille in the process, says he didnt liek the round headlights,,,, he didnt finish that mod either, has a fresh built 454 that needs cam and intake and accessories put on and has 5 bolt suspensiion all around and has rust out bad on driver bed wheel arch opening and in tail of gloor of bed, he wants 2,000, he wont get that much, theres no way... Last edited by Fast68Chevy; 07-18-2002 at 03:04 PM.

07-23-2002, 10:12 PM	#5
Big-Blockman Registered User Join Date: Jun 2000 Location: eldersburg, MD USA Posts: 65	3/4 ton frame I have a complete 3/4 ton 4x4 frame, axles, TH350 (recently rebuilt) transfer case. I'm in Baltimore MD, can arrange delivery, $1000.00. complete.

08-24-2002, 05:04 PM	#7
faokla Registered User Join Date: May 2001 Location: fargo okla ellis Posts: 10	3/4 4x4 I got some 3/4 4x4 for parts email me as to what you want got 350 203 , 465 205 44 14 ff complete 1973 for parts in Okla __________________ UBBCode

08-26-2002, 02:28 AM	#8
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	http://67-72chevytrucks.com/vboard/s...012#post142012 also maybe gonna see about what appears to be an '81-'84 or so 4x4 shortfleet pickup- sitting in weeds now behind an empty house locally- with rusty body, of course, was parked there and apparently abandoned for at least three months now, if not even longer, maybe its got something i want or need(good engine) Last edited by Fast68Chevy; 08-26-2002 at 02:41 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.